Inudustrial Ammonia Evaporative Condenser Manufacturer



Advantages:

(1)Excellent Heat Exchange Performance

Parallel air and water path as well as the combination of coils and PVC fill, this effectively avoid the dry spot

and scale formation, and improve the heat exchange performance.

(2)Convenient Maintenance

Huge maintenance space makes it convenient to inspect the product. Technicians can enter the cooling

tower during operation time.

(3)Convenient Transportation and Installation

The Evaporative condenser is designed to be standard upper body part and bottom body part, making it is

able to be shipped separately and saves transportation and inst allation cost.

(4)Slope Water Basin Design

Suspended PVC fill and sloped water basin floor toward the drai n facilitate cleaning.

Mixed flow series principle of operation:
1.the cooled water increases the temperature differential between the water and the warm process fluid,which results in a reduced coil size,fewer coil connections,and reduced weights.this feature further reduces the tendency to form scale on the coil since cooler water offers higher solubility for scale producing compounds.

2.parallel air and water paths minimize scale-producing dry spots that may be found on the bottom of tubes in conventional units.

3.the recirculating spray water falls from the coil to a wet deck surface section where it is cooled by asecond fresh air stream using both evaporative and sensible heat transfer proeesses.

4.water is pumped over the evaporative coil at a 6.5L/S of coil face area to ensure continuous flooding of the primary heat transfer surface which enhances heat transfer efficiency and minimizes fouling and scale formation.

5.the coils section rejects heat through the fresh air evaporativing,on the other side is through the sensible heat effect of pre-cooled circulating spray water.reducing the coils evaporative cooling effect is helpful to reduce the possibility of the coils surface scaling.




 

 1. One of the biggest cooling tower & evaporative condenser manufacturers in China

 2. Annual productivity 2100 sets

 3. Supply OEM/ODM

 4. Our products such as cooling tower, evaporative condenser, pvc fill have been exported to many countries such like America, Mexico, Malaysia, Chile, India, Dubai etc

5.Professionals:
We have 52 professionals working on product R&D area, 21 of th em have senior professional titles and 12 professionals have
doctor degrees.
6.Capability:
Customize product based on different application areas, stru ctures and materials.
 Analyze cooling system based on the data collected from the sample installed, and come up with the solution
Help end-users to solve the problems related to the cooling system.
7.Achievements:
12 national new product categories, 121 national patents and Pr ovincial level technology research & innovation projects.

 

FAQ

 

1.Q: Your company is a manufacture or trading company?
A: We are  leading cooling towerand evaporative condenser manufacturer since the year of 1975 with the "famous brand"-Heng An manufacture in China.

 

2.Q: How do I get repair parts and how long does it take?
A: We have workshop can supply all parts of the product, and 90% of spare parts can be distributed to any 
place in the world within one week!

 

3.Q: What if I don't have the professional engineer to install or maintain the product?
A: We could send experience engineers on site to install the product and train your staff for equipment 
operation and maintenance.

 

4.Q: How can I choose a suitable model?
A: As long as you provide the following information, we can assist to design and select the model for you.

What is the media that need to be cooled?
What is the total heat refrigeration capacity  ? 
What is the wet bulb temperature and condenser temperature
What is your requirement of the condensing coil material and casing material?
 

Evaporative Condenser is widely used in energy chemical industry,Pharmaceuticals coal, electricity, industrial refrigeration, beer,beverage,-
food processing, the cold storage, the building air conditionin g refrigeration,etc

The food industry:Poultry Slaughtering Plant / Multi-purpose cold Storage / Beer and beverage industry / Industrial ice/Skating Rink / Ice cream factory / Fish processing industry 

Chemical medicine:Inter-cooling of methanol/methanol synthetic ammonia compressor / Syngas cooling condensation / Methanol distillation process cooling condensation / Gas cooling of natural gas or coke gas exchange process / 

Purification process as weoo as cooling condensation / Steam condensation of turbine / Ethyl acetate condensation


Packing  and Shipping 

1) Packed by standard packing for sea shipping or train transport. 

2) The equipment is divid into upper body and bottom body two parts, each part shipped by one 40HQ, so each equipment need two 40HQ.

Our service
 

1, Customerization available.  My design engineers will make the technical proposals for you specially.

2, Engineers oversea technical service available.

3, All documents you need we will do our best to supply.

Why Choose Us

1. Heng An has two different types of cooling tower: combined flow type and counter flow type. Both types' products are certified by CE, TUV, BV.

2. We have a complete process to control the product quality, from raw material testing to final product testing.
3. With more than 50 engineers working on product R&D areas, we can design and produce customized cooling tower based on customer's requirement.
4. With many years experience in the industry, our professional sales and after-sales service team can help you solve problems that you may not able to handle by yourself.
5. Our products have been exported to many countries including America, Peru, Columbia, India, Philippines, Chile and many other countries, and received positive feedback from customers and markets.
6. 24 month warranty and best payment term&price.

Any  more  information,please feel free to contact us directly .