Technical parameters:

Items	Technical Parameters		Image
Name	200KHz ultrasonic transducer
Model	PHAL-200-01G
Frequency	200KHz±5%
Detection Distance	0.10~1.5m
Minimum Parallel lmpedance	400Ω±20%
Capacitance	770pF±20% @1KHz
Sensitivity	Emitting voltage:800Vpp,distance:30cm,receiving and emitting,Receiving signal:25 mV
Operating Voltage	Peak Voltage<1000VPP
Operating Temperature	-40~+80ºC
Pressure	16Kilos or 1.6MPa
Angle	(Beamwidth) Half-power Beam Width@-3dB:8.6°±2 Sharp Angle:17.1°±4
Housing Material	titanium alloy
Usage	Ultrasonic Gas Flow Meter
Installation Dimension	customizable
Protection Level	IP68
Weight	30g±5%( length:25cm)
Wiring Instructions	integrated type:Red+,White-,Black: shielded wire;
Admittance Curve		Product Structure Diagram

Block diagram of ultrasonic distance transducer :



Schematic Diagram of Temperature Sensor (model: MF58_502F3470):



Integrated type Cable instruction:   
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +      
White: transducer -         
Black: shielding



2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)


Red and black are temperature sensor wiring


   Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB

Three-core wiring instructions:                
                        
 Red: Transducer +
     Blue: temperature sensor +
     Black: Public-


 Four-core wiring instructions:

Red: Transducer +                      
Yellow: Transducer-
Blue, black: temperature sensor