Wisdom SS316 Arc Spray Wire
DESCRIPTION
SS 316 stainless steel wire specifically designed for arc spraying. It produces dense,
well-bonded coatings with excellent machine ability and wear and corrosion resistance. SS316 is
widely used for machine element repair, dimensional restoration and wear resistance applications. It has relatively high shrink characteristics and should not be used for coatings over 0.075 inches thick.

 
TYPICAL DEPOSIT CHARACTERISTICS:
? Typical Hardness      HRB 90-100
? Bond Strength         6750 psi
? Deposit Rate          10 lbs /hr/100A
? Deposit Efficiency      75%
? Wire Coverage        0.8 oz/ft2 / m
? Surface Texture       *Variable
? Machine ability        Good
* Depends on air pressure used.
SURFACE PREPARATION:
Surface should be clean, white metal,
with no oxides (rust), dirt, grease, or oil
on the surface to be coated. Note: It is
best not to handle surfaces after
 
cleaning.
Recommended method of preparation
is, to grit blast with 24 mesh aluminum
oxide, rough grind, or rough machine in
a lathe.
APPLICATION:
? Part Restoration
? Rams
? Food Industry Rolls
SPECIFICATION:
316 SS
NOMINAL CHEMICAL COMPOSISTION (wt%):
Cr    Ni    Mn   Si    Fe
17.0  12.0  2.0   1.0   Bal

 
RECOMMENDED SPRAY PARAMETERS:
Diameter        Air Pressure       Voltage        Amperage         Standoff
1/16" (1.6mm)    *50 - 60 psi         *28 - 30       *100 - 200         *4 - 6 in (10 - 15cm)
* Parameters are typical and may vary depending on equipment used. Contact your equipment manufacture for optimum spray parameters.
STANDARD SIZES & PACKAGING:
Diameter                  Packaging                        Wire Weight 
1/16 (1.6mm)                 D300 Spool                          15kg (33lb)/spool
 
 
Wisdom Heating Alloy (Shanghai) Co.,Ltd
ADD: Room 502A Zhennan Road, No.1428,Shanghai City,China
TEL:+86-21-61395047   FAX: +86-21-61395049   
Http: wisdom-sh2015.en.made-in-china.com    wisdom-sh2015.en.made-in-china.com