Products

UL FM Dry Barrel Fire Hydrant with Flange Connector

China UL FM Dry Barrel Fire Hydrant with Flange Connector, Find details about China Hydrant, Fire Hydrant from UL FM Dry Barrel Fire Hydrant with Flange Connector

Model NO.
MH-1510FA
Working Pressure
250psi
Shell Test Pressure
500psi
Seal Test Pressure
500psi
Connection
Flange
Material of Body
Ductile Iron
Opertion Nut Material
C95400
Certificate
UL,FM
Flow Media
Water
Trademark
APC
Transport Package
Export Standard Wooden Case
Specification
6"
Origin
China
HS Code
8481809000
Model NO.
MH-1510FA
Working Pressure
250psi
Shell Test Pressure
500psi
Seal Test Pressure
500psi
Connection
Flange
Material of Body
Ductile Iron
Opertion Nut Material
C95400
Certificate
UL,FM
Flow Media
Water
Trademark
APC
Transport Package
Export Standard Wooden Case
Specification
6"
Origin
China
HS Code
8481809000
UL FM Dry Barrel Fire Hydrant with Flange connector
UL FM Dry Barrel Fire Hydrant with Flange Connector
UL FM Dry Barrel Fire Hydrant with Flange ConnectorUL FM Dry Barrel Fire Hydrant with Flange ConnectorUL FM Dry Barrel Fire Hydrant with Flange Connector
Model No.:MH-1510FA/MH-1510A
Technical Specifications:
  1. Design Standard:AWWA C502
  2. Nominal Pressure:17.2 bar(250PSI)
  3. One pumper nozzle:4.5-4NH thread .Two hose nozzles,2.5-7.5NH threads.
   Other kinds of threads are available
  1. Mechnical connector:AWWA/ANSI C153/A21.53  6", Model No.:MH-1510A
  2. Flange connector:ASME B16.5 CLASS 150/DIND2501 PN16 Model No.:MH-1510FA
  3. Main Valve sizes : 133.4 mm / 5-1/4"
  4. Finish : Red epoxy paint & Bitumen Black
  5. Note : Each hydrant is supplied with a hydrant wrench.
  6. UL 246 Listed,FM 1510 Approved
 
40Bolt2SS304ASTM A240
39Screw stem bushing1SS304ASTM A240
38100 Cover gasket1EPDMASTM D2000,EPDM
37100 Connector1C95400ASTM B148
36Check turn gasket1Gr.BASTM A283-B
35Locking nut gasket1DIASTM A536 Grade 65-45-12
34Platen1DIASTM A536 Grade 65-45-12
33Annular tubes11045ASTM A29\29M
32Bolt,Nut61035ASTM A29\29M
31Seat fixing plate1DIASTM A536 Grade 65-45-12
30Bolt,Nut2SS304ASTM A240
29Seat1C95400ASTM B148
28Drain hole cover1C95400+EPDMASTM B148+ASTM D2000,EPDM
27Cushipn rubber1EPDMASTM D2000,EPDM
26Screw stem11045ASTM A29\29M
25Bolt,Nut81035ASTM A29\29M
24Cover chain3Gr.BASTM A283-B
23Cylindrical pin11045ASTM A29\29M
22100 cover1DIASTM A536 Grade 65-45-12
21Bolt,Nut81035ASTM A29\29M
20Screw nut seat1C95400ASTM B148
19Screw nut gasket1C95400ASTM B148
18Screw stem nut1C95400ASTM B148
17Thread plug1C95400ASTM B148
16Upper end cover1DIASTM A536 Grade 65-45-12
1565 Cover2DIASTM A536 Grade 65-45-12
1465 Cover gasket2EPDMASTM D2000,EPDM
1365 Connector2C95400ASTM B148
12Main body on ground1DIASTM A536 Grade 65-45-12
11Clamp for connection tube1DIASTM A536 Grade 65-45-12
10Connecting rod sleeve11045ASTM A29\29M
09Perforated cylindrical pin21045ASTM A29\29M
08Connecting cylinder1DIASTM A536 Grade 65-45-12
07Drain hole spring2SS316ASTM A240
06Sealed rubber sheet1EPDMASTM D2000,EPDM
05Tray1DIASTM A536 Grade 65-45-12
04Locking nut gasket1EPDMASTM D2000,EPDM
03Connecting rod11045ASTM A29\29M
02Locking nut gasket1DIASTM A536 Grade 65-45-12
01Flange connector or Mechnical connector1DIASTM A536 Grade 65-45-12
Part No.Part NameQty.Req'dMaterialSpecification

Model NumberDimension mm(mm/inch)Weight(kg)
 A(mm/inch)B(mm/inch)C(mm/inch)D(mm/inch/feet)
MH-1510FA
MH-1510A		208/8.2805/31.7460/18.1911/36/3178
1063/42/3'6"185
1215/48/4'190
1368/54/4'6"196
1520/60/5'211
1673/66/5'6"220
1825/72/6'241
1978/78/6'6"246
2130/84/7'251



Fire Hydrant
Model No.:MH-1510FA/MH-1510A                Installation, operation & maintenance
Installation
1. Hydrants should be handled with care to avoid damage.  It is recommended to keep hydrants closed until use.
2. If the hydrant is not to be used straight away then it is recommended to coat threads and other machined parts with
an anti-rust oil and the hydrant should be stored in a dry and ventilated area.  For long-term storage, the hydrant should be checked regularly.
3. Before installation of hydrants, the connection should be free from dirt or other matter.
4. The positioning of the hydrant should be in accordance with local requirements.  Ideally the pumper should face the
street and all connections should be away from any obstruction to connecting hoses.
5. The inlet elbow should be placed on a solid surface and if possible brace the side opposite the incoming flow to
reduce reaction stresses.
6. The underground parts of the hydrant should be surrounded with coarse gravel for support and drainage.
7. After the hydrant has been installed and tested, it is recommended to fully flush the hydrant before closing for ser-vice. Before replacing the nozzle caps, it is recommended to check for correct drainage of the hydrant on closing of the valve.  This can be achieved by placing a hand over the nozzle opening, a suction should be felt.




Operation
1. Unscrew the nozzle caps and connect hoses.
2. Open the hydrant using the hydrant key (included) to the fully open position by turning the valve nut in an
anti-clockwise direction - do not force the hydrant to open further past the fully open position.  Note that the hydrant valve is not intended to control the flow, it should be used in either the fully open or fully closed position.
To control flow, a pressure/flow control valve should be fitted to the nozzle outlets on the hydrant.
3. To close, turn the valve nut in a clockwise direction - again, do not over tighten.

   Maintenance
1. Carry out a visual inspection for signs of significant corrosion which may impair performance.
2. Where possible, carry out leak tests by opening one of the nozzle caps slightly and then opening the hydrant valve.
Once the air has escaped tighten the hose cap and check for leaks.
3. Close hydrant and remove one nozzle cap so that the drainage can be checked.
4. Flush the hydrant.
5. Clean and lubricate all nozzle threads.
6. Clean the exterior of the hydrant and repaint if required.
 

You Might Also Like