Fmc Weco Replacement Wing Unions Fig 1002

China Fmc Weco Replacement Wing Unions Fig 1002, Find details about China Wing Union, Hammer Union from Fmc Weco Replacement Wing Unions Fig 1002

Basic Info.

Model NO.

FIG 1502

Standard

API 6A

Logo

Customized Acceptable

Trademark

BETTER

Transport Package

Plywood Case

Specification

fig 1502

Origin

China

HS Code

8431431000

Model NO.

FIG 1502

Standard

API 6A

Logo

Customized Acceptable

Trademark

BETTER

Transport Package

Plywood Case

Specification

fig 1502

Origin

China

HS Code

8431431000

Product Desciption

Wing Unions / Hammer Unions
BETTER Wing Unions are widely used in the fluid or mud manifolds, Cementing and choke-and kill lines; it was divided by union color code, to use for lower-pressure, middle-pressure and high-pressure standard trim or H2S trim. We also manufacture compatible Hammer Union Seals (Lip Seal), O-ring, Lip seal rings, stainless steel backed seal rings, and brass backed seal rings for Weco Wing Union.

Features

Adopted high strength alloy steel/carbon steel appropriate to specific pressure rating, strict heat treatment technique, rigid quality control as per API Spec 16C ;
Equivalent to FMC WECO style Hammer Union with identical size to ensure easy replacement;
API Standard LP/NPT, Tubing threaded, and butt-weld end connection available;
Complete line of standard service and sour gas wing unions in size from 1"-12" with working pressure up to 20000psi, Sour service conform to NACE specification;
Quality and full style of hammer union seals can be provided in Buna-N, Viton, and Buna-N/Viton with a brass ring, Buna-N/Viton with a stainless steel ring, and Teflon. There are 80 Nitrile, 80 Viton, 90 Viton or upon request.
The same figure number, size, and pressure rating are interchangeable, making it easy to match male and female subs that are frequently made-up and broken-out.

Wing Unions for Low Pressure Service 1000 - 2000psi
Feature-
Spherical surface of male sub and conical surface of female sub to form a metal-to-metal seal
Ball-and-cone seal remains leak-proof even when one surface is slightly pitted or misaligned

Figure 100

Recommend for air, water, gas and oil service to 1000psi cwp manifold and line connection
An economical low-pressure union
Size from 2"-8"
API standard thread and butt-weld end connection
Black Nut & Yellow Sub

Figure 200

Recommend for air, water, and oil or gas service to 2000psi cwp general service manifold and line connection
Size from 1"-10"
API standard thread and butt-weld end connection available for 2" and above
Blue Nut & Grey Sub

Wing Unions for Medium Pressure Service 2000 - 4000psi
Feature-
Metal-to-metal seal with a resilient O-ring in the male sub, the replaceable O-ring extends union life and protect the metal-to-metal against corrosion.

Figure 206
Recommend for air, water, and oil or gas service to 2000psi cold working pressure manifold and line connections and corrosion service
Size from 1"-10"
Buna-N O-ring in male sub provides an additional sealing and protect metal-to-metal seal
API standard thread and butt-weld end connection available for 2" and above
Blue Nut & Grey Sub
Subs and nuts of Fig.206 are interchangeable with Fig.200

Figure 207 Blanking Union

Recommend for air, water, and oil or gas service to 2000psi CWP to seal manifold connections and protect union thread
Size 3", 4", 6"
Buna-N O-ring in male sub provides an efficient seal closure
API standard thread and butt-weld end connection available
Blue Nut & Grey Sub
Subs and nuts of Fig.207 are interchangeable with Fig.200, Fig.206

Figure 211 Insulating Union

Recommend for 2000psi cold working pressure production systems with electrolytic corrosion problems
Size from 1"-4"
Laminated insulating rings provide 35 million Ohms resistance across the union
Buna-N O-ring in male sub provides a positive primary seal and seal ring in female sub as a secondary seal
All insulating rings, O-ring and seal ring can be replaced
API standard thread and butt-weld end connection available
Blue Nut & Grey Sub

Figure 400

Recommend for 2 1/2"- 12" air, water, oil or gas manifold and line connection, general service and sour gas service
4000psi CWP for 4" below and 2500 psi over 4" to 12"
Ball and cone seating surface for easy alignment and dependable pressure seal
2" available with a lip-type seal
API standard thread and butt-weld end connection available
Black Nut & Red Sub

Wing Unions for High Pressure service 6000 - 20000psi
Feature-
Sealing with a replaceable lip-type seal ring in the female sub, this primary seal protects the secondary metal-to-metal seal from abrasion and corrosion while minimizing flow turbulence

Figure 600

Recommend for air, oil, gas or steam service to 6000psi cold working pressure manifold, line connection for drilling, well servicing
Size from 1" - 4"
Rugged and fast 2 pitch acme thread make it quickest union
Fitted with a bronze seal insert as primary seal, not rust in water service
API standard thread and butt-weld end connection available
Black Nut & Silver Sub

Figure 602

Recommend for air, oil, gas or steam service to 6000psi cwp manifold, line connection and mud service
Size from 1" - 4"
Replaceable lip-type seal provides primary seal, protect metal-to-metal seating surface
Available for sour gas service
Smaller than lighter than Fig.600, recommend for truck mounting where size and weight are critical
API standard thread and butt-weld end connection available
Black Nut & Orange Sub

Figure 1002

Recommend for high pressure manifold system, cementing, fracturing, acidizing, testing and choke kill lines;10000psi cwp through 4", and 7500 psi cwp for 5" and 6"
Size from 1" - 6"
Replaceable lip-type seal (Buna-N) provides primary seal, protect secondary metal-to-metal seating surface, 5" and 6" have O-ring for primary seal
Available for sour gas service
API standard thread and butt-weld end connection available
Red Nut & Blue Sub

Figure 1003 Misaligning Union

Recommend for high pressure connections where lines can't be aligned, 10000psi cwp for 2" and 3", 7500psi cwp for 4" and 5"
Size from 2" - 5"
Ball seat provides positive seal with up to +/-7.5 ° misalignment
Available for sour gas service
Replacement O-ring one male sub provides primary seal, to protect metal-to-metal seal against abrasion and corrosion
API standard thread and butt-weld end connection available
Black Nut & Green Sub

Figure 1502

Recommend for air, water, oil, gas and mud service 15000psi CWP cementing, fracturing, acidizing, testing and choke kill lines
Size from 1" - 5"
Available for sour gas service up to 10000psi
Replacement lip-type seal provides primary seal (Buna-N), to protect metal-to-metal seal against abrasion and corrosion
API standard thread and butt-weld end connection available
Blue Nut & Red Sub

Figure 2002

Recommend for 20000psi cold working pressure standard service cementing, fracturing, acidizing, testing and choke kill lines
Size from 2", 3"
Replacement lip-type seal provides primary seal (Buna-N), to protect metal-to-metal seal against abrasion and corrosion
Butt-weld end connection only
Green Nut & Green Sub
Figure 2202 for sour gas service, up to 15000psi, size from 2" and 3" available in butt-weld only, MR-01-75 standard