Products

Cn80 Pneumatic Power Wire Collated Coil Nailer

China Cn80 Pneumatic Power Wire Collated Coil Nailer, Find details about China Coil Nailer, Nail Gun from Cn80 Pneumatic Power Wire Collated Coil Nailer

Model NO.
CN80
Degree of Automation
Semi-automatic
Screwdriver Startup Mode
Under pressure
Condition
New
Customized
Customized
Weight
3.98kgs (Aluminum Body) 3.68kgs (Magnesium Body
Load Capacity
225-300PCS Nails
Operating Pressure
5-8.3kgs/Cm2 (70-120psi )
Fasteners Length
50mm - 83 mm
Shank
2.5mm - 3.3 mm
Nails Head
6.0mm-8.0mm
Power Source
Pneumatic
Dimensions
362 X 132 X 307mm
Business Type
Manufacturer and Trading Company
OEM Service
Available
Trademark
KYA
Transport Package
According to Your Requirements
Specification
CE SGS
Origin
China
HS Code
84671900
Model NO.
CN80
Degree of Automation
Semi-automatic
Screwdriver Startup Mode
Under pressure
Condition
New
Customized
Customized
Weight
3.98kgs (Aluminum Body) 3.68kgs (Magnesium Body
Load Capacity
225-300PCS Nails
Operating Pressure
5-8.3kgs/Cm2 (70-120psi )
Fasteners Length
50mm - 83 mm
Shank
2.5mm - 3.3 mm
Nails Head
6.0mm-8.0mm
Power Source
Pneumatic
Dimensions
362 X 132 X 307mm
Business Type
Manufacturer and Trading Company
OEM Service
Available
Trademark
KYA
Transport Package
According to Your Requirements
Specification
CE SGS
Origin
China
HS Code
84671900
Cn80 Pneumatic Power Wire Collated Coil Nailer
 
Tool Specification:
MODELCN80 (Aluminum body/Magnesium body)
FIRING METHODContact trip
FIRING MODE:Bump fire
WEIGHT:3.98kgs (Aluminum body) 3.68kgs (Magnesium body)
DIMENSIONS:362 x 132 x 307mm
OPERATING PRESSURE:5-8.3kgs/cm2 (70-120psi )
Customized Customized is available if you provide a drawing or sample
OEM ServiceAvailable
Cn80 Pneumatic Power Wire Collated Coil Nailer
 
 
Nail Specification:
15° Flat wire welded coil nails
LENGTH:50mm - 83 mm
SHANK DIAMETER:2.5 - 3.3 mm
HEAD:6.0-8.0mm
SHANK TYPE:Smooth, ring & screw
Cn80 Pneumatic Power Wire Collated Coil Nailer
Cn80 Pneumatic Power Wire Collated Coil Nailer
 
 
Applications:
Assembly and repair of pallets,drums,export wooden boxes.
Crating
Wooden Fencing
General construction applications including:siding,decking and sheathing
Cn80 Pneumatic Power Wire Collated Coil Nailer

 
Features:
   Ergonomic design, well balanced
   Extra heavy-duty, die cast aluminum construction
   Big load capacity
   Powerful, rapid nailing performance
   Comfortable rubber grip
   Light weight

 
Service and Repars:
No.  SymptomProblemsSolutions
1.1Air Leak Air leak in the cylinder cap when tools don't work 1.Loose head valve piston seal or o-rings .Check and replace the head valve piston set
2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap Check and replace o-ring or cylinder cap gasket under the cylinder cap
1.2Air leak in Trigger area  when tools don't work1.Damaged o-ring in trigger valve Check and replace  o-ring
2.Damaged o-ring in trigger valve stem Check and replace o-ring
3.Dirt in the trigger valveCheck and clean the trigger valve
1.3Air leak in cylinder cap when tools are working 1.Damaged head valve piston o-ringsCheck and replace  o-rings
2.Damaged seal under cylinder cap Check and replace seal
1.4Air leak in nose when tools are working 1.Worn or damaged bumperCheck and replace bumper
2.Loose driver(piston unit) threadCheck and replace driver(piston unit) 
1.5Air leak in Trigger area when tools are working1.Worn or damaged trigger valve headCheck and replace trigger valve head
2.Damaged head valve piston o-ringsCheck and replace head valve piston o-rings
2Failed to get driver(piston unit) back to the correct position completely.1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled.Straighten the driver(piston unit)  or verify driver guide(nose) and magazine  
2.Worn or damaged nozzle  Check and replace nozzle 
3.The space between piston o-ring and  cylinder is too tight.Check if the cylinder is adequate lubrication or replace the o-ring on the piston.
3Work weakly and sluggishly1. Worn or damaged  piston o-ring Check and replace piston o-ring 
2.Inadequate lubrication for head valve piston o-rings or too tight head valve piston o-rings  Place 2 or 6 drops of oil on o-rings or replace  head valve piston o-rings
3.Dirt in the nozzleCheck and clean the nozzle
4Tool jams frequently1.Damaged or Worn driver (piston unit)Check and replace driver (piston unit)
2.Damaged or Worn driver guide (nose)Check and replace  driver guide (nose)
3.Driver guide cover is bent,so the space between driver guide cover and driver guide is too bigCheck and replace driver guide cover 
5Nail can not be shot1. Driver (piston unit) can't return to the correct position.Refer to no. 1  Symptom
2.Driver guide(nose) can not match magazine wellCheck and correct the position between driver guide(nose) and magazine 
3.Worn or damaged nail pusher compression spring 

 
FAQ:

1.Q:Do you have your own production factory?
   A:Yes,we not only have our own factory,We also have a cooperative relationship with more than one hundred factories in China

2.Q: Can you send us samples?
   A: We are pleased to send you the sample to test the quality and market.
 
3.Q: About your products, could you do it OEM?
   A: Yes, OEM service is available.
 
4.Q: Do you also provide spare parts of pneumatic tools? 
    A: Once we confirm the models you'd like to order, we will send you the diagram for checking and also suggest you some easy-broken parts.
 
5.Q: For the product, could you spray other color of painting?
    A: Yes, color can be customized.
 
6.Q: What's the delivery time?
    A: It usually takes about 20-30 working days to produce one order.
 
7.Q: How is the payment terms?
    A: Normally T/T 30% in advance and T/T 70% before shipment.
 
8.Q: Can I mix different models in one container?
    A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.
   
9.Q: How does your factory do regarding quality control?
      A: We always pay great attention to quality control from the very beginning and every product was tested piece by piece before delivery.
 
10.Q: Do you have quality certification?
      A: Yes, we have CE, SGS,ISO, ect.

                                               
About Us:

Cn80 Pneumatic Power Wire Collated Coil Nailer


Contact Us:
 
Cn80 Pneumatic Power Wire Collated Coil Nailer

 

You Might Also Like