Products

Power and Signal Coaxial Video Camera Surge Arrester

China Power and Signal Coaxial Video Camera Surge Arrester, Find details about China Camera Surge Arrester, 2 in 1 Monitor Lightning Arrester from Power and Signal Coaxial Video Camera Surge Arrester

Model NO.
OP-SV2/24
Index of Protection
IP20
Operating Environment
Temperature:-40-+85oc Humidity: ≤95%
Warranty
Warranty
Response Time Ta
1ns
Trademark
opplei
Transport Package
Carton or Wooden Cases
Specification
CE, FCC, ISO9001, RoHS, China National Type Test
Origin
China
HS Code
8535300000
Model NO.
OP-SV2/24
Index of Protection
IP20
Operating Environment
Temperature:-40-+85oc Humidity: ≤95%
Warranty
Warranty
Response Time Ta
1ns
Trademark
opplei
Transport Package
Carton or Wooden Cases
Specification
CE, FCC, ISO9001, RoHS, China National Type Test
Origin
China
HS Code
8535300000
Function For Protection Both Power and Signal Coaxial Video Camera Surge Arrester
Model: OP-SV2/24
APPLICATIONS:
Designed to protect monitor equipments (Power, Coaxial video), widely applied in bank monitor & safe guard system.
Monitor equipment for school, enterprise, road etc. security and protection.
FEATURES:
Multi. Protection circuits, Gas-Tube+ TVS technology
Dual protection in Common module and different module
2 in 1 protection
TVS array technology, low capacitance
Multi-Strike Capability
TECHNICAL PARAMETER: 
ModelOP-SV2/24
Electrical Parameter
Video Part
SPD Porttwo port
Max. continuous operating voltage Uc12V
Nominal discharge current(8/20µs)In3kA
Max. discharge current  (8/20µs)Imax5kA
Limiting voltage  Up Line-line40V
Up  Line-ground600V
Adapt transmission rate30Mbps
Insertion loss0.5dB
Response time1ns
Protection modeCentre yarn-Skin  Skin-Ground
Interface formBNC F/F
Power Part 
Working voltage   Un24V 
Max. continuous operating voltage Uc30V 
Nominal discharge current In(8/20µs)5kA
Max. discharge current Imax (8/20µs)10kA
Protection level  Up120V
Interface form2P Compression plug
Mechanical characteristics 
Dimension100(L) ×60(W) ×36(H)mm
Weight per unit130g
IP Code IP20
Way to installScrews to install
Working conditionsTemperature: -40 to 80ºC,
Relative humidity: ≤95%
 

INSTALLATION AND MAINTENANCE
A)       The SPD should be connected in series between the protected device and the signal/power transmission channel.
B)      The input terminal (IN) of the SPD should connect to the signal/power transmission channel, and the output terminal (OUT) of the SPD should connect to the protected device.
C)       Connect earthing wire of the SPD to earthing bus-bar of the lightning protection system of the room or building.
No special duty needs to be carried out for maintenance.When problem arises and the SPD is suspected, check the system with SPD taken out of circuit.Should system recover, the SPD shall be regarded as a damaged unit and must be replaced immediately.

Package and Delivery: 
1. white boxes+ papar cartons.
2. Also can packed according to customers' requirment 
3. Delivery time: 7-12 working days after deposit. 

Shipping Method: 
By international express: 
DHL, UPS, TNT, Fedex, EMS
By Air and By Sea

Our service: 
Prompt response: Any inquiries will be replied within 24 hours;
 
Professional manufacturer;
OEM/ODM available;
After-sale Service:
   1).  All products will be strictly Quality Checked in house before packing;
   2).  All products will be well packed before shipping.
   3).  All products have  5 years warranty.


 

You Might Also Like