Products

Works More Than 9 Hours Cable Fault Tester for Locating and Pinpointing

China Works More Than 9 Hours Cable Fault Tester for Locating and Pinpointing, Find details about China Spiral Power Cable Fault Test Equipment, 0.1m Accuracy Underground Cable Tester from Works More Than 9 Hours Cable Fault Tester for Locating and Pinpointing

Model NO.
PCLD-902P
Power Consumption
300mA ,Works More Than 9 Hours
Charger
Input AC220±10, 50Hz; Output 8.4V, DC 1A
Charge Time
More Than 4 Hours
Display
320*240 LCD
Volume
270*150*210mm
Weight
1.5kgs
Trademark
Grewin
Transport Package
Export Standard Carton or Customize
Specification
PCLD-902P Digital Power Cable Fault Pin-pointer
Origin
China
HS Code
9030899090
Model NO.
PCLD-902P
Power Consumption
300mA ,Works More Than 9 Hours
Charger
Input AC220±10, 50Hz; Output 8.4V, DC 1A
Charge Time
More Than 4 Hours
Display
320*240 LCD
Volume
270*150*210mm
Weight
1.5kgs
Trademark
Grewin
Transport Package
Export Standard Carton or Customize
Specification
PCLD-902P Digital Power Cable Fault Pin-pointer
Origin
China
HS Code
9030899090
Introduction
The PCLD-902P Digital Power Cable Fault Pin-pointer is an easy operation device used to pinpoint the fault point.It's matched with high voltage signal generator.The cable fault tester is suitable for measuring underground power cables, high-frequency coaxial cables, local telephone cables, street lamp cables, low-resistance of short-circuit, open-circuit disconnection faults, and various materials of various materials with different cross-sections and different media. Leakage and high resistance flashover faults. A powerful cable management system that automatically generates test reports and high accuracy pinpoint.

Works More Than 9 Hours Cable Fault Tester for Locating and Pinpointing


Grewin 0-32kv 1000j DC High Voltage Generator High Voltage Test Equipment for Cable Fault Location
Design Features
  1. Audio magnetic synchronous method,high anti-interference capability
  2. Audio and magnetic signal waveform display.Signal and noise is easy to distinguish
  3. Cursor measurement of audio magnetic delay,accurately distance locating
  4. Route tracing while pinpointing according the initial polarity of magnetic waveform
  5. Build-in High capacity lithium-ion battery and quick charger
  6. High performance antinoise earphone
  7. Power supply management:power off automatically in 15 min. without action; Power off also when low battery voltage.
  8. Big LCD screen,user-friendly
  9. Solid housing case and easy to carry
Tech. Specifications

 
Audio magnetic synchronous pin-pointing:
Audio signal transmission band Mid-frequence 400Hz ,bandwidth 200Hz.
Gain of signal channel  80dB
Accuracy of pin-pointing 0.1m
Power supply:
Battery built-in Li-ion battery pack, nominal voltage 7.4V,Capacity 3000mAH
Power consumption 300mA ,works more than 9 hours
Charger Input AC220±10, 50Hz; output 8.4V, DC 1A
Charge time More than 4 hours
Other
Display 320*240 LCD
Volume 270*150*210mm
Weight 1.5kgs
Work condition -10ºC-40ºC
Humidity5-90%RH
Elevation:<4500m

Physical Characteristics
PCLD-902P Digital Power Cable Fault Pin-pointer
Standard configuration:
Main unit
One sensors
High performance antinoise earphone
Charger
  1. Main unit panel
Works More Than 9 Hours Cable Fault Tester for Locating and Pinpointing
                    
Details:
  1. LCD screen:Display device and testing informations.
  2.      Press 2 sec. to turn on/off the device
  3.      Press to turn on/off the backlight
  4. Pause:Press to pause the magnetic synchronous trigger for waveform checking.Press again to recover.
  5.        Move the cursor
  6. Mag.gain+/-: change the gain of synchronous magnetic signal
  7. Audio gain+/-:Adjust the audio signal gain when distance locating and pinpointing
  8. Sync.:flash one time when magnetic trigger
  9. Charge port:charge for the build-in battery
   Earphone port:Voice monitor when pinpointing
   Sensor:Connect with audio magnetic synchronous pinpointing sensor

1.Company introduction
Works More Than 9 Hours Cable Fault Tester for Locating and Pinpointing

2.Certificate:

Low Loss Electrical Power Voltage Transformer with ISO9001: 2015

3.Terms of Shipment:
Within 10 working days after received related prepayment or L/C.

4.Payment terms:
(1)T/T 100% or 50% deposit by T/T in advance, balance amount to be paid 7 days before
delivery.
(2) By irrevocable L/C at sight, to be issued immediately against confirmed order.
(3)Payment by T/T, if order amount is less than USD 20,000.

5.Warranty:
(1)We provide 1 year warranty.
(2)If the product is defective, please notify us within 3 days of delivery.
(3)All products must be returned on their original condition, in order to qualify for a refund or exchange of goods

6.Why choose us?
Quality and honest first!
A. Flexible service for diffierent transformers with high efficiency performance.
B. Over 40 years experience of transformer designing and producing.
C.100% test of every single product we produce from incoming material checking.
D. UL, CE, ISO9001:2008
E. We offer custom-made transformers, OEM and ODM are welcome
F. We deliver the quality you expect at consistently competitive prices
G.Transformer quality lifetime:10 Years.
H.Specialty Sales service:5 -10 Years

7.Flow chart of trading activities:


NO
Step
Days need

1
Request for quotation
1 day

2
Making quotations
1 day

3
Offer and counter offer
3 days

4
Sending and receiving samples
3-10 days

5
Sample confirmation
3 days

6
Placing a firm order
1 day

7
Paying and receiving the down payment
1-4 day

8
Factory production & Quality inspection
15-20 days

9
Paying and receiving the balance
4 days

10
Delivery of goods
1 days

8.CONTACT:
Alice.Lee
Tianjin Grewin Technology Co.,Ltd.
Web:transformer.en.made-in-china.com  


Contact:
Grewin.Beyond
Tianjin Grewin Technology Co.,Ltd.
Web:transformer.en.made-in-china.com



 

You Might Also Like