Activated Carbon Filter, water purification system, water clean system
 
Introduction 
 
UF system is widely used in processing of mineral water, which features easy operation, less labor force and low running cost.
 
 Activated Carbon Filter, water purification system, water clean system
 
Composition of Water Treatment System
 
 
 
Pre-treatment System.
Pre-treatment system is composed of mechanical filter, active carbon filter and precision filter. The water temperature requires 25±3°C.
 
Mechanical filter can remove most of suspension, colloid and grain impurity, which can ensure initial purification of water.
 
UF system
UF system is composed of high-pressure pump, UF system and chemical cleaning device.
 
During running, UF membrane may form some deposit and chemical cleaning device is equipped for periodical cleaning to ensure stable running of UF system.
 
High-pressure pump is the power source of UF system. To UF system on sound running condition, high-pressure pump equips inlet/outlet pressure switch. When inlet pressure is less than set value (water lack P≤0.05Mpa) or outlet pressure is higher than set value, pressure switch send signal to PLC programming system and high-pressure pump and UF system will stop in avoidance of destroying to UF membrane because of water pressure.
 
UF system can wash surface of UF membrane by low-pressure timely and periodically.
Specifications
 
 Activated Carbon Filter, water purification system, water clean system