PVC Resin granules SG5 for making shoes
1. Shape: Granules or powder
2. Color: According to your demand
3. Processing method: Extrusion/ injection/ blow molding
4. Feature: Eco-friendly or not, non-peuliar smell, cold-resistant, bright colorful, high elongation at break, tensile strength
5. Packing: In 25kgs/bag. About 18tons/20ft
6. Delivery time: 7working days in normal! ! , depend on the order quantity
7. Manufacturer
8. Virgin or recycled PVC granules
9. Large stock
10. Fram pipe seal raw materials
Usage: It'sthe insulation material of PVCtube, panel, hard transparent sheet, foil, disc, PVC monofilament, blow molding product, appliance insulation material, shoes sole.
SG-1 is used in producing high-grade electrical insulating material
SG-2 is used in producing electrical insulating material, common soft products and film
SG-3 is used in producing electrical insulating materials, agricultural film, daily-use plastic products,
SG-4 is used in producing membranelle for industrial and civil use, tube and pipes
SG-5 is used in producing transparent products section bar, hard tube and decorative materials
SG-6 is used in producing clear foil, hard board and welding rod
SG-7, SG-8 is used in producing clear foil, hard injection molding.
Storage and transport: Prevent from rain, snow, humid, sunshine, throwing and other mechanical damage.
Suspension Grade |
SG1 |
SG2 |
SG3 |
SG4 |
SG5 |
SG6 |
SG7 |
SG8 |
K value |
77-75 |
74-73 |
72-71 |
70-69 |
68-66 |
65-63 |
62-60 |
59-55 |
Viscosity, ml/g |
156-144 |
143-136 |
135-127 |
126-119 |
118-107 |
106-96 |
95-87 |
86-73 |
Average polymerization |
|
|
1350-1250 |
1250-1150 |
1100-1000 |
950-850 |
950-850 |
750-650 |
Number of impurity particle≤ |
30 |
30 |
30 |
30 |
30 |
30 |
40 |
40 |
Volatiles content %,≤ |
0.40 |
0.40 |
0.40 |
0.40 |
0.40 |
0.40 |
0.40 |
0.40 |
Appearing density g/ml≥ |
0.42 |
0.42 |
0.42 |
0.42 |
0.42 |
0.45 |
0.45 |
0.45 |
Residual after sieve
0.25mm mesh≤ |
2.0 |
2.0 |
2.0 |
2.0 |
2.0 |
2.0 |
2.0 |
2.0 |
0.063mm l≥ |
90 |
90 |
90 |
90 |
90 |
90 |
90 |
90 |
Number of grain/400cm2≤ |
40 |
40 |
40 |
40 |
40 |
40 |
40 |
40 |
Plasticizer absorbency
value of 100g resin |
25 |
25 |
25 |
22 |
19 |
16 |
14 |
14 |
Whiteness %,≥ |
74 |
74 |
74 |
74 |
74 |
74 |
70 |
70 |
Residual chlore thylene content mg/kg≤ |
5 |
5 |
5 |
5 |
5 |
5 |
5 |
5 |
Ethylidene chloride mg/kg≤ |
150 |
150 |
150 |
150 |
150 |
150 |
150 |
150 |