China Gnss Module with Patch Antenna, Find details about China Gnss Navigation Module, GPS Module with Audio Head 4pin from Gnss Module with Patch Antenna
Parameter | Specification |
Power Supply | Supply voltage: 3.0V~5.0V Typical: 3.3V |
Power Consumption | Acquisition: 25mA @VCC=VBAT=3.3V |
Tracking: 20mA @VCC=VBAT=3.3V | |
Backup: 15uA @VBAT=3.3V | |
Receiver Type | Code 56 search channels ,22 synchronous tracking channels |
GPS&QZSS L1 1575.42MHz C/A ,GLONASS L1OF 1602MHz, | |
SBAS: WAAS, EGNOS, MSAS, GAGAN | |
Sensitivity | Tracking: -165dBm |
Re-acquisition: -156dBm | |
Acquisition: -146dBm | |
TTFF (Autonomous) | Cold start: 35s type @-130dBm |
Warm start: 30s type @-130dBm | |
Hot start : 1s type @-130dBm | |
Horizontal Position Accuracy (Autonomous) | <2.5m CEP @-130 dBm |
Max Update Rate | Up to 10Hz, 1Hz by fault |
Accuracy of 1PPS Signal | not enabled |
Acceleration Accuracy | Without aid: 0.1m/s² |
Dynamic Performance | Maximum altitude: 18,000m |
Maximum velocity: 515m/s | |
Acceleration: 4G | |
UART Port | UART Port: TXD |
Supports baud rate from 4800bps to 115200bps, 9600bps by default | |
UART port for NMEA and UBX output |