Rcdb-8 Dry Electromagnetic Magnetic Separator

China Rcdb-8 Dry Electromagnetic Magnetic Separator, Find details about China Separator, Electromagnetic from Rcdb-8 Dry Electromagnetic Magnetic Separator

Model NO.
Rcdb
Energy Saving
Energy Saving
Warranty
1 Year
Color
Yellow
Customized
Customized
Condition
New
Operation Mode
Continuity
Trademark
HAISUN
Specification
Diameter: 400 mm
Origin
Weifang Sangdong China
Model NO.
Rcdb
Energy Saving
Energy Saving
Warranty
1 Year
Color
Yellow
Customized
Customized
Condition
New
Operation Mode
Continuity
Trademark
HAISUN
Specification
Diameter: 400 mm
Origin
Weifang Sangdong China
Natural Cooling Hanging Type Electromagnetic Separator Series Rcdb-3
 Ply-Wooden Box
PART I: Technical Data:
Rated voltage DC-220V, duty cycle TD-60%, steel temperature: below 150 degree
Model    RCDB-3
Suiting Belt Width    300 mm
Erection Height    < 75 mm
Magnetic Induction    ≥ 57 mT
Material Thickness     ≤ 50 mm
Excitation Power    ≤ 0.5 kW
Applicable Belt Speed    ≤ 2.5 m/s
Diameter    400 mm
Mass    220 kg
Natural Cooling Hanging Type Electromagnetic Separator Series Rcdb-3
Note:
1. We advise you to use alternate separators and excitant them intermittently, so they can remain a cold-state working situation and thus have a strong and stable attraction force. The control circuit that adopts PLC program control is flexible and can not only discharge iron regularly but also has sound & light alarm.
2. Measuring equipment of coil temperature can be supplied to meet customers' requirement. So does weighing equipment, which can discharge over-weight iron first and give out alarm at the same time.

PART II: WHAT IS SEPARATOR
The magnetic separator consists of a large rotating drum that creates a magnetic field. Materials enter the separator and fall out through mesh at the base if they are not magnetic. Sensitive particles respond to the magnetism and cling to the sides of the container. The drums can be used in continuous processing of materials as they move along the assembly line, or in batch jobs, where a single batch is run through all at once.
One common use for magnetic separation is to remove unwanted metal from a shipment of goods. Magnetic separation can help companies keep materials pure, as well as remove things like nails and staples that may have crept into a shipment. The equipment can also purify ores, separate components for recycling, and perform a variety of other tasks where metals need to be separated or isolated. Equipment can range in size from a desktop unit for a lab that needs to process small amounts of material to huge drums used in scrap metal recycling centers.
 
Series RCDB, also named PDC disc type electromagnetic separator, is used for removing iron from powdery or lumpy nonmagnetic material.

1. Magnetic circuit adopts computer simulation design, so it has a deep penetration strong magnetic force and high field gradient and can provide max attracting force.
2. The shell is welded by sealed steel plate and has gone through a strict test of air-proof. Meanwhile, a vacuum filling epoxy resin has been added between coil and shell to enable the equipment work well even in harsh working conditions.
3. Natural cooling mode is adopted which causes a less risk of fault occur.
4. All tech data meet the standard JB/T7689-2004 and some are even beyond the national standard. The product can remove 0.1~35 kg materials from non-magnetic materials and the removing rate can up to 95% or more.

PART III: Installation Indication
 Natural Cooling Hanging Type Electromagnetic Separator Series Rcdb-3
 As you could see from the above picture, there has two installation ways for the separator: on the head or on the middle of conveyor.
 
But no matter you install on which part of the conveyor, you need to make sure:
The separator is on the right top of conveyor
The separator should be straightly vertical of conveyor
Make sure there has lifting point on the top of conveyor, we could provide you adjustable lifting chain. Or you could have a frame to fix the separator above the conveyor.
This type of separator is of manual discharging type, you need to remove the iron parts attached on separator by workers with non-magnetic Scraper Plate.
You could check and confirm if you in need Non-magnetic Roll or not.
For the manual discharging type, you could also need to check with your customer if you need travelling car or not.
Rcdb-8 Dry Electromagnetic Magnetic Separator