Brass constructed Header Corners connect and secure header pieces meeting at various angles. The appropriately angled Corner slides neatly into the 'T' slot in the top of the Header, and is visible from a top view only, thus concealing the appearance from normal bathroom viewing areas. We offer fixed 90º and 135º Corners, along with Adjustable Corners for non-standard angles. Screws are included with each corner purchased.

Designed to fit in the header key way. This bracket holds the angle at 135 degrees. If you angle is not exactly 135 degrees you should use the adjustable angle bracket.Set screws angled to pull the corners tighter as they are tightened.

Care & Cleaning Guidelines

For best results, keep the following recommendations in mind when caring for your shower door hardware. Your shower door should be dried daily with a soft towel or cloth to ensure its original finish. Do not use harsh cleaners or chemicals on the hardware, as many of the components are coated with a clear lacquer that will become damaged beyond repair. Always test your cleaning solution in an inconspicuous area prior to cleaning the entire hardware surface. Wipe surfaces clean using a soft, dampened cloth or sponge, and rinse completely with warm water immediately after applying the cleaning solution. Use only small amounts of liquid, gentle, cleaner. Never use abrasive products, sponges, or wire scrub brushes while cleaning hardware.