Products

Digital Refrigerated ASTM D445 Low Temperature Kinematic Viscometer Bath

China Digital Refrigerated ASTM D445 Low Temperature Kinematic Viscometer Bath, Find details about China ASTM D445, ASTM D445 Pdf from Digital Refrigerated ASTM D445 Low Temperature Kinematic Viscometer Bath

Model NO.
GD-R0518
Loading Method
Dynamic Load
Display
Digital
Weight
0-100Kg
Power Source
AC220V
Oil Cylinder Position
Under
Applicable Standards
GB/T265, ASTM D445, ISO3104, DIN51366
Temperature Control Mode
Imported Pid Digital Display Thermostat
Temperature Control Accuracy
Normal Temperature~-40+/-0.1c
Heating Method
Heating Tube Heating
Machine Power
2.5kw
Working Unit
2 Tubes
Working Power Supply
AC220V/50Hz
Refrigeration Method
Compressor Refrigeration
Trademark
GOLD
Transport Package
Venner Case or as Required
Specification
Refer to ASTM D445
Origin
Made in China
HS Code
9031809090
Model NO.
GD-R0518
Loading Method
Dynamic Load
Display
Digital
Weight
0-100Kg
Power Source
AC220V
Oil Cylinder Position
Under
Applicable Standards
GB/T265, ASTM D445, ISO3104, DIN51366
Temperature Control Mode
Imported Pid Digital Display Thermostat
Temperature Control Accuracy
Normal Temperature~-40+/-0.1c
Heating Method
Heating Tube Heating
Machine Power
2.5kw
Working Unit
2 Tubes
Working Power Supply
AC220V/50Hz
Refrigeration Method
Compressor Refrigeration
Trademark
GOLD
Transport Package
Venner Case or as Required
Specification
Refer to ASTM D445
Origin
Made in China
HS Code
9031809090
GD-R0518 Digital Refrigerated ASTM D445 Low Temperature Kinematic Viscometer Bath



Introduction:

The Low Temperature Kinematic Viscometer is suitable for determining the low temperature viscosity of petroleum products. The mechanism of the instrument is to measure the time during which a certain volume of liquid flows under gravity through a calibrated glass capillary viscometer at a constant temperature. The product of the capillary constant of the viscometer and the flow time is the kinematic viscosity of the liquid measured at that temperature.

The Low-temperature kinematic viscometer can be applied to a wide range of petroleum products. Calibrated capillary viscometers are used to measure flow under gravity or vacuum at precisely controlled temperatures.


Features:

1. Dewar flask as a bath, transparent observation.
2. One-piece structure, easy to operate.
3. Vacuum Dewar insulation, inner cylinder Φ150*300mm.
4. Two samples can be tested at the same time, which is convenient for parallel samples.
5. High-power solid-state relay control output, no voltage leakage.
6. There is a stirrer on the electronic heating bath.
7. Stainless steel heater
8. The thermostat displays the heating state.
9. The outer shell is made of high-quality cold-rolled steel plate, and the surface is treated by electrostatic spray, which has good rust prevention and easy cleaning.
10. Safety facilities to prevent overheating and low water levels.
11. Contact control box is very convenient.
12. Microcomputer controller, PID function, digital display temperature (continuous display during test), accuracy 0.1C,Pt100 RTD temperature probe.
13. Fully enclosed compressor refrigeration, large cooling capacity and low noise.


Parameters:

1. Applicable standards: GB/T265, ASTM D445, ISO3104, DIN51366
2. Temperature control mode: imported PID digital display thermostat
3. Temperature control accuracy: normal temperature~-40±0.1ºC
4. Heating method: heating tube heating
5. Machine power: 2.5KW
6. Working unit: 2 tubes
7. Working power supply: AC220V/50Hz
8. Refrigeration method: compressor refrigeration


ASTM D445 Low Temperature Kinematic Viscometer Bath:

Digital Refrigerated ASTM D445 Low Temperature Kinematic Viscometer Bath
 

You Might Also Like