Products

135m Pinch Roller

China 135m Pinch Roller, Find details about China Pinch Roller, Gripping Rolled Piece Feeding from 135m Pinch Roller

Model NO.
HJ-PR135
Feeding Specification
5.5~18mm
Feeding Rate
30~135m/S
Pinch Roll Diameter
Dia180/Dia176X72mm
Max Gripping Force
3000n
Speed Increasing Ratio
6.92
Maximum Line Velocity
80m/S
Motor
DC Z4-180-41
Motor Power
750kw
Motor Speed
1500/3000 R/Min
Trademark
Hangji
Transport Package
Seaworthy Packing or as Customer′s Request
Specification
ISO9001, SGS, BV
Origin
Shaanxi, China
HS Code
8455213000
Model NO.
HJ-PR135
Feeding Specification
5.5~18mm
Feeding Rate
30~135m/S
Pinch Roll Diameter
Dia180/Dia176X72mm
Max Gripping Force
3000n
Speed Increasing Ratio
6.92
Maximum Line Velocity
80m/S
Motor
DC Z4-180-41
Motor Power
750kw
Motor Speed
1500/3000 R/Min
Trademark
Hangji
Transport Package
Seaworthy Packing or as Customer′s Request
Specification
ISO9001, SGS, BV
Origin
Shaanxi, China
HS Code
8455213000
135m Pinch Roller
135m Pinch Roller

Pinch roll:
It is the horizontal cantilener structure. It has double roll device and one air cylinder which is used to contral roll up and down synchronous clamp. Pinch roll DC motor is ueded to improve drive speed by two-stage cylindrical gear. Up and down roll are installed respectively at two swing arm. There is one air cylinder which drive the up and down roll synchronous close to or leave rolling line by a group of crank-link mechanism. There is equipped with adjustable limit equipments to adjust pinch roll max opening degree and minimum center distance between up and down roll so that could adjusted the clamp forece and wire rod not to fast simultaneously. Pinch roll drive gear box used welding structure. The gear and bearings used thin oil central lubrication process. And the bearings is used filmatic bearing and high speed roll thrust bearing. Pinch roll is long running at regular work and its speed is setted by process requirement. Pinch roll can clamp the head, end or whole wire rod on the basis of process requirement.

Equipment characteristic
Feeding specification:       Φ5.5~14mm
Feeding rate:       25~80m/s
Pinch roll specification: Φ186/176*72mm 
                                      Φ186/176*72mm
Max gripping force:     3000N
Maximum line velocity:     90m/s
Speed increasing ratio:    9.467
Motor:    DC Z315-3A
Motor power:     DC 160kW
Motor speed:     750/1700 r/min
135m Pinch Roller
135m Pinch Roller
135m Pinch Roller
135m Pinch Roller

You Might Also Like