Products

The Rolling Speed of 90m/S Pinch Roll-1117-10

China The Rolling Speed of 90m/S Pinch Roll-1117-10, Find details about China Pinch Roll, Rolling Mill from The Rolling Speed of 90m/S Pinch Roll-1117-10

Model NO.
HJ-1117-10
Feeding Specification
Dia 5.5~14mm
Feeding Rate
25~75m/S
Max Gripping Force
3350n
Maximum Line Velocity
80m/S
Speed Increasing Ratio
6.92
Motor Power
550kw
Motor Speed
1500/3000 R/Min
Trademark
Hangji
Transport Package
Seaworthy Packing or as Customer′s Request
Specification
ISO9001, SGS, BV
Origin
Shaanxi, China
HS Code
8455213000
Model NO.
HJ-1117-10
Feeding Specification
Dia 5.5~14mm
Feeding Rate
25~75m/S
Max Gripping Force
3350n
Maximum Line Velocity
80m/S
Speed Increasing Ratio
6.92
Motor Power
550kw
Motor Speed
1500/3000 R/Min
Trademark
Hangji
Transport Package
Seaworthy Packing or as Customer′s Request
Specification
ISO9001, SGS, BV
Origin
Shaanxi, China
HS Code
8455213000
The Rolling Speed of 90m/S Pinch Roll-1117-10

Pinch roll:
It is the horizontal cantilener structure. It has double roll device and one air cylinder which is used to contral roll up and down synchronous clamp.Pinch roll DC motor is ueded to improve drive speed by two-stage cylindrical gear. Up and down roll are installed  respectively at two swing arm.There is one air cylinder which drive the up and down roll synchronous close to or leave rolling line by a group of crank-link mechanism .There is equipped with adjustable limit equipments to adjust pinch roll max opening degree and minimum center distance between up and down roll so that could adjusted the clamp forece and wire rod not to fast simultaneously . Pinch roll drive gear box used welding structure. The gear and bearings used thin oil central lubrication process.And the bearings is used filmatic bearing and high speed roll thrust bearing. Pinch roll is long running at regular work and its speed is setted by process requirement.Pinch roll can clamp the head ,end or whole wire rod on the basis of process requirement.

Equipment characteristic
Pinch roll
Feeding specification:       Φ5.5~14mm
Feeding rate:       25~75m/s
Pinch roll specification:      Φ158.8/Φ142.9×62m 
Pinch roll diameter 90m        Φ183/ Φ176×72mm              
  135m       Φ180/ Φ176×72mm
Max gripping force:     3350N
Maximum line velocity:     80m/s
Speed increasing ratio:         6.92
Motor:     DC Z4-180-41
Motor power:     550kW
Motor speed:     1500/3000 r/min


Machinery and equipment we can service for you:

²  high speed wire rod rolling mills,

²  high speed deformed rebar rolling mills,

²  roughing rolling mills, intermediate rolling mills, pre-finishing rolling mills and finishing                   rolling mills,

²  spare parts required in rolling mill production line.

1.Leader of the steel rolling mill field

2.SGS,ISO9001

3.warranty
The Rolling Speed of 90m/S Pinch Roll-1117-10The Rolling Speed of 90m/S Pinch Roll-1117-10

 

The Rolling Speed of 90m/S Pinch Roll-1117-10The Rolling Speed of 90m/S Pinch Roll-1117-10
 

Before sale: design the suitable machine based on the specific demands

Medium sale:

1.Based on customer's demand to offer moderate quotation project 2.Accept customers to visit our factory  

3.Help customer work out the schedule in china 
 

After-sale:

1.On-site training personnel 2.Appoint special aftersale service staff, arrived at the scene guide clients  installation and commission

 

You Might Also Like