Rolling Speed of 90m/S Pinch Roll HJ-PR902

China Rolling Speed of 90m/S Pinch Roll HJ-PR902, Find details about China Pinch Roll, Rolling Machine from Rolling Speed of 90m/S Pinch Roll HJ-PR902

Basic Info.

Model NO.

HJ-PR902

Feeding Specification

5.5~14mm

Feeding Rate

25~75m/S

Pinch Roll Diameter

Dia183/176X72mm

Max Gripping Force

3350n

Speed Increasing Ratio

6.92

Maximum Line Velocity

80m/S

Motor

DC Z4-180-41

Motor Power

550kw

Motor Speed

1500/3000 R/Min

Trademark

Hangji

Transport Package

Seaworthy Packing or as Customer′s Request

Specification

ISO9001, SGS, BV

Origin

Shaanxi, China

HS Code

8455213000

Model NO.

HJ-PR902

Feeding Specification

5.5~14mm

Feeding Rate

25~75m/S

Pinch Roll Diameter

Dia183/176X72mm

Max Gripping Force

3350n

Speed Increasing Ratio

6.92

Maximum Line Velocity

80m/S

Motor

DC Z4-180-41

Motor Power

550kw

Motor Speed

1500/3000 R/Min

Trademark

Hangji

Transport Package

Seaworthy Packing or as Customer′s Request

Specification

ISO9001, SGS, BV

Origin

Shaanxi, China

HS Code

8455213000

Product Desciption

Pinch roll:
It is the horizontal cantilener structure. It has double roll device and one air cylinder which is used to contral roll up and down synchronous clamp.Pinch roll DC motor is ueded to improve drive speed by two-stage cylindrical gear. Up and down roll are installed respectively at two swing arm.There is one air cylinder which drive the up and down roll synchronous close to or leave rolling line by a group of crank-link mechanism .There is equipped with adjustable limit equipments to adjust pinch roll max opening degree and minimum center distance between up and down roll so that could adjusted the clamp forece and wire rod not to fast simultaneously . Pinch roll drive gear box used welding structure. The gear and bearings used thin oil central lubrication process.And the bearings is used filmatic bearing and high speed roll thrust bearing. Pinch roll is long running at regular work and its speed is setted by process requirement.Pinch roll can clamp the head ,end or whole wire rod on the basis of process requirement.

Equipment characteristic
Pinch roll
Feeding specification:       Φ5.5~14mm
Feeding rate:       25~75m/s
Pinch roll specification:      Φ158.8/Φ142.9×62m
Pinch roll diameter 90m        Φ183/ Φ176×72mm
  135m       Φ180/ Φ176×72mm
Max gripping force:     3350N
Maximum line velocity:     80m/s
Speed increasing ratio:         6.92
Motor:     DC Z4-180-41
Motor power:     550kW
Motor speed:     1500/3000 r/min
Rolling Speed of 90m/S Pinch Roll HJ-PR902