China Open Frame 220kVA Standby Power Deutz Diesel Generator, Find details about China Detuz Generator, Diesel Generator 200kVA from Open Frame 220kVA Standby Power Deutz Diesel Generator
Δ STANDARD CONFIGURATION
1) Powered by brand new original CUMMINS, PERKINS, DEUTZ, DOOSAN, YUCHAI, KUBOTA, RICARDO, YANGDONG, ISUZU water cooled diesel engine.
2) Brand new STAMFORD, LEROY SOMER or GENLITEC single bearing 3 phase alternator with IP23 and H insulation class.
3) Original 50ºC radiator with engine driven fan mounted on skid.
4) DELIXI, CHINT or ABB branded case circuit breaker mounted.
5) Heavy-duty fabricated steel based frame with built-in fuel tank for at least 8 hours continuous running.
6) Complete set mounted on a based frame with anti-vibration mountings.
7) Industrial 9 dB muffler exhaust system with blexible connects and bellows.
8) Based frame with fuel, oil and coolant drain cocks for easy maintenance.
9) 12/24V DC electric start system with free maintain battery & smartgen brand battery charger.
10) Set mounted automatic control panel, with SMARTGEN, DEEPSEA, COMAP brand AMF controller module for automatic start & stop.
11) Test report of generator, set of drawings and manuals.
12) CE, ISO9001 approved
Δ TESTING ITEMS
GENLITEC POWER provides a full line of brand new and high quality products.
Each and every unit is strictly factory tested before shipment.
1) Parts faults testing
2) Fuel tank pressure testing
3) Bolt tightening torque testing
4) Painting thickness testing
5) Voltage bearing and insulation testing
6) Noise testing
7) Loading Testing: 25%, 50%, 75%, 100%, 110% load to check verify that all control systems, alarm and shut-down protection.
Δ OPTIONAL SUPPLY
1) Weatherproof canopy / Soundproof canopy / Trailer-mounted
2) Engine / Alternator Pre-heaters
3) Auto load sharing & synchronization panel
4) Build-in ATS (Auto start & stop Main Failure (AMF)
5) Large 12/24 hours fuel tank
6) Power output sockets
Δ GENSET SPECIFICATION
GENSET MODEL | GPD200D5 | GPD200S5 |
Prime power (50Hz) | 160KW/200KVA |
Standby power (50Hz) | 176KW/220KVA |
Frequency/Speed | 50Hz/1500rpm |
Voltage | 220V/380V, 230/400V, 240/415V |
Phase | Three phase, Four wires |
Manufacturer | Genlitec (Fuzhou) Power Equipment Co., Ltd. |
Model | BF6M1013FCG3 | DEUTZ |
Engine speed | 1500rpm |
Rated net power (with fan) | 183kw |
Number of cylinders | 6 |
Cylinder arrangement | Vertical in-line |
Cycle | 4-troke |
Aspiration | Natural |
Combustion system | Direct injection |
Compression ratio | 16.5 |
Bore and Stroke | 108 x 130mm |
Displacement | 17.3 Liters |
Fuel system | Pump |
Cooling system | Water cooled |
Speed-droop | 5% |
Starting system | DC24V |
Model | TAL-A46-B / Leroy Somer |
Output power | 200KVA |
Wiring type | 3 Phase 4wire, Y type |
Number of phase | 3 |
Power factor (Cos Phi) | 0.8 |
Altitude | ≤1000m |
Over speed | 2250RPM |
Number of pole | 4 |
Exciter type | Shunt |
Insulation class | H |
Voltage regulation | ±0.5% |
Wave form: NEMA = TIF | <50 |
Wave form: I.E.C = THF | <2% |
Bearing | Single |
Coupling | Direct |