China Round Steel Bar Peeling and Polishing Machine
China Round Steel Bar Peeling and Polishing Machine, Find details about China Bar Peeling Machine, Centerless Bar Peeling Machine from China Round Steel Bar Peeling and Polishing Machine
Basic Info.
Model NO.
WXC80BA
Trademark
RW
Transport Package
Seaworthy Package
Specification
weight: 5.4T
Origin
Shandong, China
HS Code
84581900
Model NO.
WXC80BA
Trademark
RW
Transport Package
Seaworthy Package
Specification
weight: 5.4T
Origin
Shandong, China
HS Code
84581900
Product Desciption
China Round Steel Bar Peeling and Polishing Machine
General Introduction
It is suitable to process different kinds of metal material, for instance, black metal material such as structural steel, alloy steel, spring steel, bearing steel,tool steel, copper and copper alloy, aluminum and aluminum alloy, magnesium alloy, titanium and titanium alloy and other non-ferrous metal materials.
WXC series of peeling machine is high-efficient specialized lathe to make a rough or fine machining to the surface of bar material such as slender shaft and other bars. It is able to not only get rid of the imperfection on the bar surface , de-carburized layer, crack etc, but also to guarantee relatively high accuracy. It is especially suitable to process extra long bar and bar with large machining allowance.
Strengths & Merits
1. It can process extra long rods, pipes and wires, including coil to coil, and coil to bars.
2. High efficiency: multiple blades simultaneously operate: its work efficiency is several times higher than conventional lathe.
3. High precision: diameter tolerance of finished products ≤h9, surface roughness ≤6.3 μm
4. Non-pollution: disposals can be recycled.
Composition Introduction
The equipment is composed of two general members: "host machine and transportation devices".
1. Host machine: host machine consists of lathe bed, spindle, oil-air lubrication system , front clamping and rear extracting systems, front guide and middle-rear guide etc.
2. Transportation devices: Transportation devices comprises loader and unloader.
3. Oil-air lubrication system: Oil-air lubrication system is specially designed for retaining effective lubricating and cooling in the process of spindle's high speed rotation. It is comprised of pump, oil air distribution block and gas source processing component.
4. Cutting liquid cooling recycling system: Cutting liquid cooling recycling system is composed of cooling water recycling pump, pipelines, nozzles etc. High pressure water pump transports cooled cutting liquid in water tank to nozzle near the cutter head through pipe. It directly sprays onto cutting blade point and chips, whereby the majority of cutting heat is taken away, and drops to discharging hole underneath the cutter head together with chips, and flows back to water tank through pipe to cool down.
5.Chip-conveyor: Chip-conveyor is an outsourced fine quality product. Chips travel through downfall hole at the bottom of cuter head and drop onto the chain plates of the conveyor and are brought out by transmission ,waiting to be collected.
6. Hydraulic pressure system: Hydraulic pressure system consists of pump electric motor, control valve, hydraulic pressure fuel tank, hydraulic pressure pipes and others. It enables to clamp and extract bars through oil cylinder within front (rear) clamping elements.
7. Electric machinery system: Electric system includes power supply and controlling system. It is composed of 1 power distributing cabinet and 1 operating button station. It fulfils the function of electric control for main transmission system, front and rear clamping feeding system, cooling system, hydraulic pressure system, chip-conveyor and transportation devices.
Parameter table
Applications
Clients Visit to Our Factory
General Introduction
It is suitable to process different kinds of metal material, for instance, black metal material such as structural steel, alloy steel, spring steel, bearing steel,tool steel, copper and copper alloy, aluminum and aluminum alloy, magnesium alloy, titanium and titanium alloy and other non-ferrous metal materials.
WXC series of peeling machine is high-efficient specialized lathe to make a rough or fine machining to the surface of bar material such as slender shaft and other bars. It is able to not only get rid of the imperfection on the bar surface , de-carburized layer, crack etc, but also to guarantee relatively high accuracy. It is especially suitable to process extra long bar and bar with large machining allowance.
| Model | Input Dia | Length | Feeding Speed | Cutting Depth | Surface Roughness | Dia.Tolerance | Spindle Motor | Total Capacity |
| WXC20 | ф5-ф20mm | ≥1400mm | 1-25m/min | 0.5-2mm | Ra≤3.2 | IT9 | 22KW | 30KW |
| WXC40 | ф5.5-ф40mm | ≥1400mm | 1-15m/min | 0.5-2mm | Ra≤3.2 | IT9 | 45KW | 63KW |
| WXC60 | ф13-ф75mm | ≥2000mm | 1-15m/min | 0.5-2mm | Ra≤3.2 | IT9 | 45KW | 63KW |
| WXC80 | ф16-ф85mm | ≥2200mm | 1-12m/min | 0.5-3mm | Ra≤3.2 | IT9 | 55KW/75KW | 75KW/90KW |
| WXC100 | ф25-ф110mm | ≥2800mm | 0.5-10m/min | 1-4mm | Ra≤3.2 | IT9 | 75KW | 95KW |
| WXC130 | ф35-ф135mm | ≥3000mm | 0.3-6m/min | 1-5mm | Ra≤3.2 | IT9 | 90KW | 120KW |
| WXC160 | ф45-ф170mm | ≥3500mm | 0.3-5m/min | 1-5mm | Ra≤3.2 | IT9 | 110KW | 140KW |
| WXC200 | ф70-ф210mm | ≥4000mm | 0.3-4m/min | 1-5mm | Ra≤3.2 | IT9 | 132KW | 165KW |
| WXC250 | ф95-ф260mm | ≥4000mm | 0.2-2.5m/min | 1-5mm | Ra≤3.2 | IT9 | 160KW | 210KW |
| WXC350 | ф150-ф360mm | ≥4500mm | 0.1-2m/min | 1-10mm | Ra≤3.2 | IT9 | 200KW | 265KW |
| WXC400 | ф205-ф410mm | ≥4800mm | 0.1-2m/min | 1-10mm | Ra≤3.2 | IT9 | 250KW | 345KW |
| WXC500 | ф315-ф510mm | ≥5000mm | 0.1-1.5m/min | 1-10mm | Ra≤3.2 | IT9 | 315KW | 415KW |
Strengths & Merits
1. It can process extra long rods, pipes and wires, including coil to coil, and coil to bars.
2. High efficiency: multiple blades simultaneously operate: its work efficiency is several times higher than conventional lathe.
3. High precision: diameter tolerance of finished products ≤h9, surface roughness ≤6.3 μm
4. Non-pollution: disposals can be recycled.
Composition Introduction
The equipment is composed of two general members: "host machine and transportation devices".
1. Host machine: host machine consists of lathe bed, spindle, oil-air lubrication system , front clamping and rear extracting systems, front guide and middle-rear guide etc.
2. Transportation devices: Transportation devices comprises loader and unloader.
3. Oil-air lubrication system: Oil-air lubrication system is specially designed for retaining effective lubricating and cooling in the process of spindle's high speed rotation. It is comprised of pump, oil air distribution block and gas source processing component.
4. Cutting liquid cooling recycling system: Cutting liquid cooling recycling system is composed of cooling water recycling pump, pipelines, nozzles etc. High pressure water pump transports cooled cutting liquid in water tank to nozzle near the cutter head through pipe. It directly sprays onto cutting blade point and chips, whereby the majority of cutting heat is taken away, and drops to discharging hole underneath the cutter head together with chips, and flows back to water tank through pipe to cool down.
5.Chip-conveyor: Chip-conveyor is an outsourced fine quality product. Chips travel through downfall hole at the bottom of cuter head and drop onto the chain plates of the conveyor and are brought out by transmission ,waiting to be collected.
6. Hydraulic pressure system: Hydraulic pressure system consists of pump electric motor, control valve, hydraulic pressure fuel tank, hydraulic pressure pipes and others. It enables to clamp and extract bars through oil cylinder within front (rear) clamping elements.
7. Electric machinery system: Electric system includes power supply and controlling system. It is composed of 1 power distributing cabinet and 1 operating button station. It fulfils the function of electric control for main transmission system, front and rear clamping feeding system, cooling system, hydraulic pressure system, chip-conveyor and transportation devices.
Parameter table
| Model | WXC80BA | |
| Workpiece Required | Daimater range(mm) | Φ13~ Φ80X2200~unlimited |
| Tensile strength σb(Mpa) | ≤1100 | |
| Surface hardness | ≤HB320 | |
| Bending(mm/m) | ≤2 | |
| Diameter tolerance | As per GB 702- second group | |
| Roundness | ≤diameter tolerance 50% | |
| Surface roughness(Ra) | ≤25~50mm | |
| Finished Products | Diameter range(mm) | Φ12~Φ78 |
| Radius cutting depth(mm) | 0.25~1.50 | |
| Diameter tolerance | ≤IT9(standard diameter tolerance) | |
| Surface roughness (Ra) | ≤6.3μm | |
| Roundness (mm) | ≤0.05 | |
| Feeding speed (infinitely adjust speed m/min) | 2.0~15.0(Slow down for materials with ceaseless chips, high strength and high hardness.) | |
| Cutter head rotating speed (infinitely variable speed) (r/min) | 200~2200 | |
| Main motor power (kW) | 55(4 ) | |
| Feeding motor power (kW) | 5.5 (4 electrodes) | |
| Clamping vehicle motor (kW) | 3.7 (servo) | |
| Dimensions (m) (reference) | Host machine 3.2X2X2.1 | |
| Weight (t) (reference) | Host machine 5.4 | |
| Total capacity (kW) | 75 | |
| Source of compressed air (prepared by user) | 0.4~0.8MPa, 2m3/min, with second grade oil and water separator | |
Applications
Clients Visit to Our Factory
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......