Wxc130ca Copper/Copper Alloy Bar Peeling Machine
China Wxc130ca Copper/Copper Alloy Bar Peeling Machine, Find details about China Ss Bar Peeling Machine, Centerless Peeling Machine from Wxc130ca Copper/Copper Alloy Bar Peeling Machine
Basic Info.
Model NO.
WXC130CA
Trademark
RW
Transport Package
Seaworthy Package
Specification
weight: 11.5T
Origin
Shandong, China
HS Code
84581900
Model NO.
WXC130CA
Trademark
RW
Transport Package
Seaworthy Package
Specification
weight: 11.5T
Origin
Shandong, China
HS Code
84581900
Product Desciption
General Introduction
It is suitable to process different kinds of metal material, for instance, black metal material such as structural steel, alloy steel, spring steel, bearing steel,tool steel, copper and copper alloy, aluminum and aluminum alloy, magnesium alloy, titanium and titanium alloy and other non-ferrous metal materials.
WXC series of peeling machine is high-efficient specialized lathe to make a rough or fine machining to the surface of bar material such as slender shaft and other bars. It is able to not only get rid of the imperfection on the bar surface , de-carburized layer, crack etc, but also to guarantee relatively high accuracy. It is especially suitable to process extra long bar and bar with large machining allowance.
Strengths & Merits
1. It can process extra long rods, pipes and wires, including coil to coil, and coil to bars.
2. High efficiency: multiple blades simultaneously operate: its work efficiency is several times higher than conventional lathe.
3. High precision: diameter tolerance of finished products ≤h9, surface roughness ≤6.3 μm
4. Non-pollution: disposals can be recycled.
Parameter Table
.
Package Inforamtion
Successful Cases
It is suitable to process different kinds of metal material, for instance, black metal material such as structural steel, alloy steel, spring steel, bearing steel,tool steel, copper and copper alloy, aluminum and aluminum alloy, magnesium alloy, titanium and titanium alloy and other non-ferrous metal materials.
WXC series of peeling machine is high-efficient specialized lathe to make a rough or fine machining to the surface of bar material such as slender shaft and other bars. It is able to not only get rid of the imperfection on the bar surface , de-carburized layer, crack etc, but also to guarantee relatively high accuracy. It is especially suitable to process extra long bar and bar with large machining allowance.
Strengths & Merits
1. It can process extra long rods, pipes and wires, including coil to coil, and coil to bars.
2. High efficiency: multiple blades simultaneously operate: its work efficiency is several times higher than conventional lathe.
3. High precision: diameter tolerance of finished products ≤h9, surface roughness ≤6.3 μm
4. Non-pollution: disposals can be recycled.
Parameter Table
| Model | WXC130CA | |
| Workpiece Required | Cutting range(mm) | Φ35~ Φ135X3000~unlimited |
| Tensile strength σb(Mpa) | ≤1100 | |
| Surface hardness | ≤HB320 | |
| Bend(mm/m) | ≤1.50 | |
| Diameter tolerance | As per GB 702-88 group two | |
| Roundness | ≤diameter tolerance 50% | |
| Surface roughness(Ra) | ≤25~50mm | |
| Finished Products | Diameter range(mm) | Φ30~Φ130 |
| Radius cutting depth(mm) | 0. 5~2.5 | |
| Diameter tolerance | ≤IT9(standard diameter tolerance) | |
| Surface roughness (Ra) | ≤3.2μm | |
| Roundness (mm) | ≤0.03 | |
| Feeding speed (infinitely adjust speed m/min) | 1.0~5.0(Slow down for materials with ceaseless chips, high strength and high hardness.) | |
| Cutter head rotating speed (infinitely variable speed) (r/min) | 160~900 (2 level speed gearbox) | |
| Main motor power (kW) | 90(4 electrodes) | |
| Feeding motor power (kW) | 5.5 (4 electrodes) | |
| Clamping vehicle motor (kW) | 4 (servo) | |
| Dimensions (m) (reference) | Host machine 4X3.7X2.4 | |
| Weight (t) (reference) | Host machine 11.5 | |
| Total capacity (kW) | 120 | |
| Source of compressed air (prepared by user) | 0.4~0.8MPa, 2m3/min, with second grade oil and water separator | |
Composition Introduction
Main Machine 1 set
Cutting Fluid Circulation Cooling System 1set
Chip Conveyor 1set
Hydraulic System 1set
Electrical System 1set
Inlet table, inlet roller way 1set
Outlet Roller way, receiving box 1set
.
| Model | Input Dia | Length | Feeding Speed | Cutting Depth | Surface Roughness | Dia.Tolerance | Spindle Motor | Total Capacity |
| WXC20 | ф5-ф20mm | ≥1400mm | 1-25m/min | 0.5-2mm | Ra≤3.2 | IT9 | 22KW | 30KW |
| WXC40 | ф5.5-ф40mm | ≥1400mm | 1-15m/min | 0.5-2mm | Ra≤3.2 | IT9 | 45KW | 63KW |
| WXC60 | ф13-ф75mm | ≥2000mm | 1-15m/min | 0.5-2mm | Ra≤3.2 | IT9 | 45KW | 63KW |
| WXC80 | ф16-ф85mm | ≥2200mm | 1-12m/min | 0.5-3mm | Ra≤3.2 | IT9 | 55KW/75KW | 75KW/90KW |
| WXC100 | ф25-ф110mm | ≥2800mm | 0.5-10m/min | 1-4mm | Ra≤3.2 | IT9 | 75KW | 95KW |
| WXC130 | ф35-ф135mm | ≥3000mm | 0.3-6m/min | 1-5mm | Ra≤3.2 | IT9 | 90KW | 120KW |
| WXC160 | ф45-ф170mm | ≥3500mm | 0.3-5m/min | 1-5mm | Ra≤3.2 | IT9 | 110KW | 140KW |
| WXC200 | ф70-ф210mm | ≥4000mm | 0.3-4m/min | 1-5mm | Ra≤3.2 | IT9 | 132KW | 165KW |
| WXC250 | ф95-ф260mm | ≥4000mm | 0.2-2.5m/min | 1-5mm | Ra≤3.2 | IT9 | 160KW | 210KW |
| WXC350 | ф150-ф360mm | ≥4500mm | 0.1-2m/min | 1-10mm | Ra≤3.2 | IT9 | 200KW | 265KW |
| WXC400 | ф205-ф410mm | ≥4800mm | 0.1-2m/min | 1-10mm | Ra≤3.2 | IT9 | 250KW | 345KW |
| WXC500 | ф315-ф510mm | ≥5000mm | 0.1-1.5m/min | 1-10mm | Ra≤3.2 | IT9 | 315KW | 415KW |
Successful Cases
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine