Products

Semi-Automatic Type Round Steel Bar Peeling Machine

China Semi-Automatic Type Round Steel Bar Peeling Machine, Find details about China Bar Peeler, Centerless Bar Peeling Machine from Semi-Automatic Type Round Steel Bar Peeling Machine

Model NO.
WXC80BA
Trademark
RW
Transport Package
Seaworthy Package
Specification
weight: 5.4T
Origin
Shandong, China
HS Code
84581900
Model NO.
WXC80BA
Trademark
RW
Transport Package
Seaworthy Package
Specification
weight: 5.4T
Origin
Shandong, China
HS Code
84581900
General Introduction

The WXC series peeling machine are special high-efficiency lathes for roughing and finishing the outer circumference of round bars/ pipes and wire rods. It removes decarburized layers, cracks and other crackers on the surface of the bars quickly and with high precision.
he models in the parameter table can be made into common types (Type B, Type C), small (CA) type and numerical control (S) type.
ModelInput Dia                       LengthFeeding SpeedCutting DepthSurface RoughnessDia.ToleranceSpindle MotorTotal Capacity
WXC20ф5-ф20mm≥1400mm1-25m/min0.5-2mmRa≤3.2IT922KW30KW
WXC40ф5.5-ф40mm≥1400mm1-15m/min0.5-2mmRa≤3.2IT945KW63KW
WXC60ф13-ф75mm≥2000mm1-15m/min0.5-2mmRa≤3.2IT945KW63KW
WXC80ф16-ф85mm≥2200mm1-12m/min0.5-3mmRa≤3.2IT955KW/75KW75KW/90KW
WXC100ф25-ф110mm≥2800mm0.5-10m/min1-4mmRa≤3.2IT975KW95KW
WXC130ф35-ф135mm≥3000mm0.3-6m/min1-5mmRa≤3.2IT990KW120KW
WXC160ф45-ф170mm≥3500mm0.3-5m/min1-5mmRa≤3.2IT9110KW140KW
WXC200ф70-ф210mm≥4000mm0.3-4m/min1-5mmRa≤3.2IT9132KW165KW
WXC250ф95-ф260mm≥4000mm0.2-2.5m/min1-5mmRa≤3.2IT9160KW210KW
WXC350ф150-ф360mm≥4500mm0.1-2m/min1-10mmRa≤3.2IT9200KW265KW
WXC400ф205-ф410mm≥4800mm0.1-2m/min1-10mmRa≤3.2IT9250KW345KW
WXC500ф315-ф510mm≥5000mm0.1-1.5m/min1-10mmRa≤3.2IT9315KW415KW
 
Strengths & Merits
1. It can process extra long rods, pipes and wires, including coil to coil, and coil to bars.
2. High efficiency: multiple blades simultaneously operate: its work efficiency is several times higher than conventional lathe.
3. High precision: diameter tolerance of finished products ≤h9, surface roughness ≤6.3 μm
4. Non-pollution: disposals can be recycled.
 Semi-Automatic Type Round Steel Bar Peeling Machine

Composition Introduction

Semi-Automatic Type Round Steel Bar Peeling Machine

Parameter table
 
ModelWXC80BA
Workpiece RequiredDaimater range(mm)Φ13~ Φ80X2200~unlimited
Tensile strength σb(Mpa)≤1100
Surface hardness≤HB320
Bending(mm/m)≤2
Diameter toleranceAs per GB 702-
second group
Roundness≤diameter tolerance 50%
Surface roughness(Ra)≤25~50mm
Finished ProductsDiameter range(mm)Φ12~Φ78
Radius cutting depth(mm)0.25~1.50
Diameter tolerance≤IT9(standard diameter tolerance)
Surface roughness (Ra)≤6.3μm
Roundness (mm)≤0.05
Feeding speed (infinitely adjust speed m/min)2.0~15.0(Slow down for materials with ceaseless chips, high strength and high hardness.)
Cutter head rotating speed (infinitely variable speed) (r/min)200~2200
Main motor power (kW)55(4

)   
Feeding motor power (kW)5.5 (4 electrodes)
Clamping vehicle motor (kW)3.7 (servo)
Dimensions (m) (reference)Host machine 3.2X2X2.1
Weight (t) (reference)Host machine 5.4
Total capacity (kW)75
Source of compressed air (prepared by user)0.4~0.8MPa, 2m3/min, with second grade oil and water separator

Clients Visit to Our FactorySemi-Automatic Type Round Steel Bar Peeling Machine


 

You Might Also Like