2100mm width pc sunshine roof panels/sheets processing machinery
PART 1 INTRODUCTION:This pp pe pc hollow cross section sheet/plate extrusion line machine consists of single screw extruder, melt-pump, hydraulic filter exchanging unit, hollowsheet die head, vacuum calibrating table, first haul off machine, oven, corona treating unit, cooling table, second haul off machine, trimming and length-settled cutting units and stacker etc.
PART 2 CHRACTERISTICS OF VACUUM CALIBRATOR1. High quality mould steel or high strength Al-Mg Alloy
2. Special harden treatment and non-sticky coating on the surface.
3. Independently controlled vacuumize device and temperature controlling system.
4. Consist of vacuum sealing edge device.
The technology of hollow sheet die with co-extrusion feed block to get UV+PC+UV, UV+PC hollow sheet can save 30% UV on the surface.
PART 3 APPLICATIONPC hollow sheet is widely used in construction sunroof in buildings/halls/shopping center/stadium/public places of entertainment and public facility; Ring shield of bus station/garages/pergolas/corridors; Noise barriers for highways and urban elevated road
PART 4 MAIN TECHNICAL DATAPC Hollow Sheet Extrusion Line Technical Data |
Extruder model | SJ-120, SJ-65 |
Sheet width | 2100mm |
Sheet thickness | 4-10mm |
Max capacity | 450kg/h |
Main motor power | 132kw |
| |
THIS LINE CONSISTS OF | |
1. vacuum feeding machine | 1 set |
2.SJ-120/36 single screw extruder | 1 set |
3. Hydraulic exchanging units | 1 set |
4. melting pump | 1 set |
5. SJ-65/30 single screw extruder for UV | 1 set |
6. melting pump | 1 set |
7. co-extrusion die head | 1 set |
8. vacuum calibrating moulds | 1 set |
9. cooling frame and edge cutting units | 1 set |
10. 12 rollers haul off machine | 1 set |
11. 3000mm length oven | 1 set |
12. film coating machine | 1 set |
13. 6 rollers haul off machine | 1 set |
14. cutting machine | 1 set |
15. sheet stacker | 1 set |
PART 5 DELIVERY, PAYMENT AND OTHERS SERVICES1. delivery time: 80 days after receiving the deposit
2. payment terms:30% for the prepayment by T/T and 70% for the downpayment by T/T before delivery or irrevocable L/C at sight can be available, too.
3. Guaranteed time: 18 months for the machenical parts and 12 months for the electrical parts.
4. Service: we will send engineers to customers' factory to help them install, test the machine.
COMPANY INFORMATION AND MAIN PRODUCTS:
COMPANY CERTIFICATION:
COMPANY OVERSEA TRADE SHOWS:
MACHINE PACKING AND DELIVERY:
CONTACT DETAILS: