Hot Sales Air Filter Laser Cutting Fume Extractor System 
 

Features

1. Central Control system implements real-time monitoring and analysis on a number of important    

     parameter of equipments in the operation and show them in the display, and it has self-diagnosis

     function, showing abnormal and error conditions in the operation of the equipment automatically.

     The central dust & fume purification system' s performance is controlled by PLC controlling system.
 

2. The functionality of a filter lies in the filter element's material, Kaisen's filter element is specially developed

     for the purification of fume and fine particles generated in welding and cutting, solved this industry's

     problem of low filtration precision and filter element's blocking. And the outer surface of the cartridge is

     covered by a  layer of  PTFE  film layer through heat treatment a special process.  Cartridge wall is thin  

     in structure and has high strength, and the surface film layer has a very uniform pores,     

     making a network structure with a bore diameter of 0.1 microns below.
 

3.  Rotary dust blowing device is inserted inside the filter cartridge, and very close to the cartridge's inner wall.

     When the solenoid valve opens, compressed air enter into two pipes drilled with nozzles, implementing rotary

     blowing to clean every part of the filter cartridge. Compared with externally placed blowing nozzles, rotary dust

     blowing "nozzles" blow force is even on every part of the cartridge, and have a thorough cleaning, avoid big

     noise and damage to the cartridge caused by instant huge blow impact of the externally placed blowing     

     method.
 

4. To the position polluted by a little oil mist, the company's special spray device not only dilutes oil mist

     and prevents the dust from attaching to the filter surface to reduce its service life, but also plays a role in

     fire prevention.
 

Applications:

1. Large amounts of fume and dust

2. Laser, plasma and flame cutting systems

3. Multi-units welding stations, grinding room

4. Training center and robot welding house

5. It is available to install indoors and outdoors

6. Workshop exhaust of Push-Pull Filtration System

Technology Parameters