Non-Ionic Polyacrylamide/Polyelectrolyte PAM
China Non-Ionic Polyacrylamide/Polyelectrolyte PAM, Find details about China Polyacrylamide/Polyelectrolyte, Polyelectrolyte/PAM from Non-Ionic Polyacrylamide/Polyelectrolyte PAM
Basic Info.
Model NO.
N-PAM
Trademark
bluwat
Origin
China
HS Code
390690
Model NO.
N-PAM
Trademark
bluwat
Origin
China
HS Code
390690
Product Desciption
Our Non-Ionic Polyacrylamide is used for water treatment and mining industries.
Features:
1) Appearance: White granule
2) Molecular weight: 5 - 8 million
3) Granule: 20 - 100 mesh
4) Solid content: 88% minimum
5) Dissolving time: 2 hours maximum (10° C)
6) Insoluble: 0.5% maximum
7) Monomer free: 0.05% maximum
Advantages:
Economical to use- Effective at very low dosage levels, resulting in reduced handling and storage cost.
Works over a wide pH range and does not alter pH in the system.
Larger, faster-settling flocs are formed in gravity settling operations.
Increased filtration rates and drier cakes are produced in filtration processes. Sludges contain less ash when incinerated.
Higher solids capture, increased clarity, and greater throughput are attained in centrifugation.
Air flotation operations produce clearer underflows and grater throughput.
Pricipal uses:
Municipal and industrial water treatment
Clarification industrial raw waters, often in conjunction with in organics such as Alum
Alum sludge dewatering.
Preparation for Application:
Any grade of Nonionic flocculant should be dissolved in water under low agitation to make 0.01% to 0.05 % solution. Dissolution should be complete after 60 minutes, but will be faster in warm water. However avoid temperature above 500° C. Stock solutions are stable for at least two weeks. For best results further dilution with clean water should be made prior to being fed to process stream. Avoid turbulent mixing conditions in the process stream after any grade of above product has been added.
Treatment Levels:
For use as:
Flocculant: O. 2 ~ 2.0 ppm.
Coagulant aid: O. 5 ~ 1.0 ppm.
Filtration aid: O. 01 ~1.0 ppm.
Sludge dewatering: O. 05 ~O. 2 % Dry solid
Handling:
Spilled polymer is very slippery. Spills should be scooped and / or wiped prier to flushing with water. Being highly hygroscopic avoid from exposure to air.
Please Note the information presented here is based on best of our present knowledge. However should not be considered as guarantee of any specific property or product as a whole.
Packing:
25kg/plastic enhanced paper bags with inner plastic bag, 25kg/PE bag
Features:
1) Appearance: White granule
2) Molecular weight: 5 - 8 million
3) Granule: 20 - 100 mesh
4) Solid content: 88% minimum
5) Dissolving time: 2 hours maximum (10° C)
6) Insoluble: 0.5% maximum
7) Monomer free: 0.05% maximum
Advantages:
Economical to use- Effective at very low dosage levels, resulting in reduced handling and storage cost.
Works over a wide pH range and does not alter pH in the system.
Larger, faster-settling flocs are formed in gravity settling operations.
Increased filtration rates and drier cakes are produced in filtration processes. Sludges contain less ash when incinerated.
Higher solids capture, increased clarity, and greater throughput are attained in centrifugation.
Air flotation operations produce clearer underflows and grater throughput.
Pricipal uses:
Municipal and industrial water treatment
Clarification industrial raw waters, often in conjunction with in organics such as Alum
Alum sludge dewatering.
Preparation for Application:
Any grade of Nonionic flocculant should be dissolved in water under low agitation to make 0.01% to 0.05 % solution. Dissolution should be complete after 60 minutes, but will be faster in warm water. However avoid temperature above 500° C. Stock solutions are stable for at least two weeks. For best results further dilution with clean water should be made prior to being fed to process stream. Avoid turbulent mixing conditions in the process stream after any grade of above product has been added.
Treatment Levels:
For use as:
Flocculant: O. 2 ~ 2.0 ppm.
Coagulant aid: O. 5 ~ 1.0 ppm.
Filtration aid: O. 01 ~1.0 ppm.
Sludge dewatering: O. 05 ~O. 2 % Dry solid
Handling:
Spilled polymer is very slippery. Spills should be scooped and / or wiped prier to flushing with water. Being highly hygroscopic avoid from exposure to air.
Please Note the information presented here is based on best of our present knowledge. However should not be considered as guarantee of any specific property or product as a whole.
Packing:
25kg/plastic enhanced paper bags with inner plastic bag, 25kg/PE bag
You Might Also Like
Handwork Polyurea Protective Material Th -701
Gasoline Hand Held Concrete Finishing Machine Mini Power Tro......
10A An87330 Three Phase Power Analyzer
3.5" eSATA HDD External Enclosure
Food Grade 304 Stainless Steel Vacuum Flask Thermal Insulati......
CE-Approval! ! ! China DT638B Hades Down Type Dental Chair
Chinese Supplier 10dt Medium Copper Wire Drawing Equipment w......
Proximal Humeral Locking Plate, Small Fragment Plates, Titan......
Industrial Parts Usi Type Seal for Piston and Piston Rod
Long Life Miniature Micro Switch Used in Phone and Designs
N210106267AA Cover