Basic Info.

Model NO.

WRN-1082

Origin

China

Model NO.

WRN-1082

Origin

China

Product Desciption

1. Product Summary
WRN-1082P is a FTTH optical receiver which can built-in ONU module (pluggable) and WIFI module. CATV optical receiving part: the max. working frequency is up to 1GHz, supporting optical AGC function and the max. output level is up to 80dBμV. ONU data access part provides four Ethernet ports with auto-negotiation 10/100M Base-T to access PC and set-top-box and other network equipment at the same time.
Model description: Built-in ONU module and WIFI module( WRN-1082P-F),
                     Only built-in ONU module (WRN-1082P).
 
2. Performance Characteristics

1. CATV optical receiving part: RF amplification circuit adopts full Ga-As MMIC device and the max. working frequency is up to 1GHz.
2. CATV optical receiving part: Optical AGC function and the max output level is 80dBμV(@+2~-8dBm).

1. ONU data access part: Fully keep to IEEE802.3ah standard, support dynamic

bandwidth allocation mechanism and multicast VLAN.

1. ONU data access part:  The max output optical power of TX is +3dBm,the min receiving optical power is -26dBm. It can support 20km coverage distance.
2. ONU data access part: Provide four Ethernet ports with auto-negotiation 10/100M Base-T and support full line-rate layer 2 data transmission.
3. High strength ABS engineering plastic housing and DC12V external power supply.

 
3. Technique Parameter
(1) CATV optical receiving part

Optical Receiving Power:-15~+2 dBm	Suggested Optical Receiving Power:-10~+2 dBm
Optical Receiving Wavelength:1100 ~ 1600 nm	Optical Connector Type:SC/APC
Optical Return Loss:> 45 dB	Optical fiber Type:Single Mode
Frequency Range:45 ~ 1003 MHz	Flatness in Band:±1 dB
Output Level:≥ 80dBμV (@-8~+2dBm)	Output Return Loss:≥ 14 dB
Link  Performance:C/N≥ 51 dB, C/CTB≥ 63 dB, C/CSO≥ 60 dB. Link test condition: Pin = -1dBm,Pout = 80dBμV,84CH PAL-D,OMI=3.8%.

 
(2) ONU data access part

Working optical wavelength:TX:1310 nm,                          RX:1490 nm	Optical Connector Type:SC/APC
TX output optical power:-1~+3 dBm	RX receiving sensitivity:-26 dBm
Optical fiber Type:Single Mode	Standard:IEEE802.3ah
Transmission rate:1Gbps symmetric uplink and downlink	LAN port:4-port 10/100M Base-T auto-negotiation

 
(3) General Features

Input Voltage:DC 12V	Output Impedance:75Ω
Work environment:0°C~40°C,                 10%~85% no condensation	Storage environment:-40°C~80°C                   5%~95% no condensation
Dimension:200*135*40(mm)	Consumption:≤ 6W(with ONU)

Flow Chart