Products

Mjlb37 Coal Mining Machinery Shearer Coal Cutter Supplier with CE Certification

China Mjlb37 Coal Mining Machinery Shearer Coal Cutter Supplier with CE Certification, Find details about China Chain Coal Cutting Machine, Coal Cutter from Mjlb37 Coal Mining Machinery Shearer Coal Cutter Supplier with CE Certification

Model NO.
MJLB37
Motor Model
Ybc-37
Motor Power
37kw
Rated Voltage
380V/660V
Trademark
chinacoal
Transport Package
as Customers Requirement
Specification
2235*490*390mm
Origin
China
Model NO.
MJLB37
Motor Model
Ybc-37
Motor Power
37kw
Rated Voltage
380V/660V
Trademark
chinacoal
Transport Package
as Customers Requirement
Specification
2235*490*390mm
Origin
China

Introduction of MJLB37 Coal Mining Machinery Shearer Coal Cutter Supplier with CE Certification


The machine is small in size, light in weight, low in noise, good in dustproof effect, stable in operation, compact in structure, convenient in installation, operation and maintenance, convenient in moving direction, safe and reliable in use.
The electrical parts of the machine have certain explosion-proof performance, and the motor cooling method is water-cooled.
Compared with manual coal mining, this machine can greatly improve the coal block rate, save mining and time, and can significantly improve economic benefits for enterprises. It is the best equipment for mining ultra-thin composite coal seams for artificial gutters.zmwm10

Application of MJLB37 Coal Mining Machinery Shearer Coal Cutter Supplier with CE Certification


This machine is used in the general medium and small mines under the gently inclined thin coal seam, the ultra-thin composite coal seam coal mining face to cut the bottom trough, to achieve the role of caving.
This machine can be used in mines where the ambient air content of methane, coal ash, hydrogen sulfide, carbon dioxide, etc. does not exceed the safety content specified in the Coal Mine Safety Regulations. This machine is used for the mining of complex coal seams. It can be used to cut the bottom groove in the working face with a height above 0.45 meters.
Suitable for coal seam hardness f ≤ 4 ° working surface.
 It is suitable to tilt the angle a<25° working face along the bottom wall of the coal wall.

Parameter of MJLB37 Coal Mining Machinery Shearer Coal Cutter Supplier with CE Certification

Adustment methodHand artery movementWorking methodWorking back and forth along the coal wall
Traction methodWire rope tractionMotor ModelYBC-37
Traction speed0~920mm/minMotor Power37KW
Groove depth1000±50mmRated voltage380V/660V
Cut chain line speed1900mm/sDimention2235*490*390mm
Rope capacity2500mWire rope specification6*37
Traction30.66KNTotal weight1230±2kg
Traction power9kwCutting power28kw
cooling methodWater coolingNo-load lowering speed4184mm/min
cooling methodSpiral waterway inside coolingWorking methodWorking back and forth along the coal wall
DustproofCooling water cutting section dustproofLubrication methodContinuous pressureless lubrication
 
 
 

Photos of MJLB37 Coal Mining Machinery Shearer Coal Cutter Supplier with CE Certification

Mjlb37 Coal Mining Machinery Shearer Coal Cutter Supplier with CE CertificationMjlb37 Coal Mining Machinery Shearer Coal Cutter Supplier with CE CertificationMjlb37 Coal Mining Machinery Shearer Coal Cutter Supplier with CE CertificationMjlb37 Coal Mining Machinery Shearer Coal Cutter Supplier with CE Certification
 

You Might Also Like