Remote Pet Training Collar with LCD Display 100LV 300 Yard Level Dog Training Behaviour Aids Collar with Battery&Retail Package is to complete stop barking functions by remote control vibration, also available voice commands. Remote control stop bark collar is the only humane current, safe and efficient use of digital electronic products pet discipline.
Features:
1. 100 levels of vibration.
2. 100 levels of static (optional).
3. The levels can be altered by use of up & down button.
4. A tone button activates a tone on the receiver.
5. This system is used for only 1 receiver.
6. The receiver will TURN OFF if it is unused for 4 minutes.
7. Any movement will activate the receiver into STANDBY MODE.
8. The transmitter will go into STANDBY MODE if there is no operation after 20 seconds and turn off after 2 minute.
9. Adjustable belt length, maximum length up to 18inches, two pairs of metal prong (short/long) to suit dogs with varied fur thickness.
User Manual for Transmitter:
1. To install the batteries, open the battery cover, which is at the back of the transmitter.
2. Install the battery (2 x 4LR44/ 6V) in the transmitter and ensure the polarity is correct.
3. The transmitter will be TURN ON automatically.
4. Press the buttons one by one - the LCD images will change.
5. Press the up and down buttons on right hand side to set level. .
6. The LED light can be used for giving training signals.
7. The transmitter will go into STANDBY MODE if not operated for 20 seconds and will TURN OFF if not operated for 2 minutes.
8. In STANDBY MODE, press any button (except LED light button) to wake it up.
9. To TURN ON the transmitter, hold mode button for at least 5 seconds.
User Manual for the Receiver and Code:
1.To install the batteries
2.Remove the cover
3.Install the batteries (2xAAA 1.5V), make sure the polarity is correct
4.There is a beep right after installing the batteries in the receiver
5.Go to the transmitter and choose 1 or 2 channel to encode by pressing the channel button 1/2 in the transmitter
6.Then press the LAUNCH button on transmitter immediately
7.The receiver will beep - it is now encoded to the transmitter
8.Replace cover and tighten metal probes
100 levels of electronic-shock/vibrating for different conditions
The strong static impulse can penetrate the hair of the pet and fabric within 6mm thick. It is unnecessary to let the discharging point touch the skin of the pet. Therefore it is safe for the pet.
The static impulse can quickly and effectively curb the improper deeds of the pet.
With the movement induction power switch in the collar receiver, it will turn on/off automatically to save power.
Convenience of easy-to-read LCD screen shows the stimulation level.
Over 3,000 different identity codes to prevent conflicts with other e-collars.
Lightweight and non-obtrusive collar
Pager non-electrical stimulation
Soft collar is comfortable to wear.
Strongest electronic shock is effective for big dogs
Vibration makes communication with your dog in gently
300 yards away from the control(on open air&no radio signal interference)
Fit most kind of dog from 10 lbs to 120 lbs.
Notice: Please install the battery for receiver and remote controller firstly, then switch on the device, press the button on the remote controller, the reciever will shake and make sounds
package Included:
1, control the phone 43.5 g
2, the receiver 48 g
3, a dog collar 22.5 g
4, the control cell phone battery one pair of 20 g
5, the receiver battery one pair 13 g
6, the contact parts a pack 8 g
7, the English description 2.5 g
8, a 15 g Blister
9, 53.5 g box box Specifications: 17x13.5x4.5cm 0.25kgs / pc