Self Adhesive HDPE EVA Waterproofing Sheet Rolls Prefabricated Building Waterproof Membrane
China Self Adhesive HDPE EVA Waterproofing Sheet Rolls Prefabricated Building Waterproof Membrane, Find details about China HDPE Waterproof Membrane, EVA Sheet from Self Adhesive HDPE EVA Waterproofing Sheet Rolls Prefabricated Building Waterproof Membrane
Basic Info.
Model NO.
sahdpe
Ceiling Tile Type
HDPE
Surface Treatment
Roll Coated
Function
Fireproof, Sound-Absorbing, Waterproof
Certification
ISO, MSDS, CE
Color
White
Usage
Outdoor, Indoor
Product Name
High Polymer HDPE EVA Self Adhesive Membrane
Surface Material
Sands ,
Features
UV Resistance, Long Service Life, Easy Apply
Application
Tunnel ,Underground,Cave,Bridge,Roof
Trademark
Jin Lu Yang
Transport Package
Woven Bag
Specification
1m, 2m
Origin
China
Model NO.
sahdpe
Ceiling Tile Type
HDPE
Surface Treatment
Roll Coated
Function
Fireproof, Sound-Absorbing, Waterproof
Certification
ISO, MSDS, CE
Color
White
Usage
Outdoor, Indoor
Product Name
High Polymer HDPE EVA Self Adhesive Membrane
Surface Material
Sands ,
Features
UV Resistance, Long Service Life, Easy Apply
Application
Tunnel ,Underground,Cave,Bridge,Roof
Trademark
Jin Lu Yang
Transport Package
Woven Bag
Specification
1m, 2m
Origin
China
Product Desciption
High polymer HDPE EVA self adhesive pre-applied waterproof membrane
Introduction
Self adhesive EVA/HDPE pre applied waterproof membrane is based on high polymer materials and coated with a non-bitumen environmental friendly polymer self-adhesive layer ,it is widely used in underground project, it can bond with concrete layer tightly.
Specification
Features
1.Good bonding with concrete applied on membrane, to block water between membrane and concrete further to protect concrete effectively.
2.Low flatness requirement to substrate, reliable overlapping; mechanical fixing, easy application.
3. Good puncture resistance performance.
4.Adaptable to settlement and distortion.
5.Weather resistance and anti-UV.
6.Resist to acid, alkali, mold.
7.Eco-friendly material
Application
1.Basement , Subway , Tunnel , Cave and Other underground public constructions
Introduction
Self adhesive EVA/HDPE pre applied waterproof membrane is based on high polymer materials and coated with a non-bitumen environmental friendly polymer self-adhesive layer ,it is widely used in underground project, it can bond with concrete layer tightly.
Specification
| Product | High polymer self adhesive hdpe waterproof membrane |
| Width | 1m , 2m |
| Length | 20m |
| Thickness | 1.2mm , 1.5mm , 1.8mm , 2.0mm |
| Surface material | white sand , color sand , self adhesive layer |
| Color | white |
Features
1.Good bonding with concrete applied on membrane, to block water between membrane and concrete further to protect concrete effectively.
2.Low flatness requirement to substrate, reliable overlapping; mechanical fixing, easy application.
3. Good puncture resistance performance.
4.Adaptable to settlement and distortion.
5.Weather resistance and anti-UV.
6.Resist to acid, alkali, mold.
7.Eco-friendly material
Application
1.Basement , Subway , Tunnel , Cave and Other underground public constructions
2.The roofing of industrial and civil building :planting roof, flat roof ,pitched roof
3.Artificial lake , reservoir ,landfill ,basement ,grain depot , etc
Installation
1. Substrate preparation
Remove all protrusions and clean up the substrate
2. Install membrane(loosely laid)
Loosely lay the membranes onto the substrate (ensure the adhesive side to face upward)
3. Rolls Overlapping
(1) Cut edges
Tear down the release film, adhere adjacent membranes together, then using tools to press overlapping area to insure firm bonding (if you need, heat the overlapping area, then proceed with overlapping)
(2) Roll end laps
Position special tape strip of appropriate sizes over the lap of beneath membrane, then melt the strip using hot-air welding gun and immediately overlap the adjacent membranes together. Press firmly over lapping area to achieve seamless joints.
4. Tie up reinforcement ,cast concrete and proceed with other subsequent architectural jobs.
Factory
Installation
1. Substrate preparation
Remove all protrusions and clean up the substrate
2. Install membrane(loosely laid)
Loosely lay the membranes onto the substrate (ensure the adhesive side to face upward)
3. Rolls Overlapping
(1) Cut edges
Tear down the release film, adhere adjacent membranes together, then using tools to press overlapping area to insure firm bonding (if you need, heat the overlapping area, then proceed with overlapping)
(2) Roll end laps
Position special tape strip of appropriate sizes over the lap of beneath membrane, then melt the strip using hot-air welding gun and immediately overlap the adjacent membranes together. Press firmly over lapping area to achieve seamless joints.
4. Tie up reinforcement ,cast concrete and proceed with other subsequent architectural jobs.
Factory
You Might Also Like
Handwork Polyurea Protective Material Th -701
Gasoline Hand Held Concrete Finishing Machine Mini Power Tro......
10A An87330 Three Phase Power Analyzer
3.5" eSATA HDD External Enclosure
Food Grade 304 Stainless Steel Vacuum Flask Thermal Insulati......
CE-Approval! ! ! China DT638B Hades Down Type Dental Chair
Chinese Supplier 10dt Medium Copper Wire Drawing Equipment w......
Proximal Humeral Locking Plate, Small Fragment Plates, Titan......
Industrial Parts Usi Type Seal for Piston and Piston Rod
Long Life Miniature Micro Switch Used in Phone and Designs
N210106267AA Cover