Products

Pre-Laid Self-Adhesive HDPE/EVA Waterproofing Membrane

China Pre-Laid Self-Adhesive HDPE/EVA Waterproofing Membrane, Find details about China HDPE Waterproof Membrane, EVA Sheet from Pre-Laid Self-Adhesive HDPE/EVA Waterproofing Membrane

Model NO.
sahdpe
Ceiling Tile Type
HDPE
Surface Treatment
Roll Coated
Function
Fireproof, Sound-Absorbing, Waterproof
Certification
ISO, MSDS, CE
Color
White
Usage
Outdoor, Indoor
Product Name
High Polymer HDPE EVA Self Adhesive Membrane
Surface Material
Sands ,
Features
UV Resistance, Long Service Life, Easy Apply
Application
Tunnel ,Underground,Cave,Bridge,Roof
Trademark
Jin Lu Yang
Transport Package
Woven Bag
Specification
1m, 2m
Origin
China
Model NO.
sahdpe
Ceiling Tile Type
HDPE
Surface Treatment
Roll Coated
Function
Fireproof, Sound-Absorbing, Waterproof
Certification
ISO, MSDS, CE
Color
White
Usage
Outdoor, Indoor
Product Name
High Polymer HDPE EVA Self Adhesive Membrane
Surface Material
Sands ,
Features
UV Resistance, Long Service Life, Easy Apply
Application
Tunnel ,Underground,Cave,Bridge,Roof
Trademark
Jin Lu Yang
Transport Package
Woven Bag
Specification
1m, 2m
Origin
China
High polymer HDPE EVA self adhesive pre-applied waterproof membrane

Introduction

Self adhesive EVA/HDPE pre applied waterproof membrane is based on high polymer materials and coated with a non-bitumen environmental friendly polymer self-adhesive layer ,it is widely used in underground project, it can bond with concrete layer tightly.
Pre-Laid Self-Adhesive HDPE/EVA Waterproofing MembranePre-Laid Self-Adhesive HDPE/EVA Waterproofing Membrane
Specification 
Product High polymer self adhesive hdpe waterproof membrane 
Width 1m , 2m
Length 20m
Thickness 1.2mm , 1.5mm , 1.8mm , 2.0mm
Surface materialwhite sand , color sand , self adhesive layer 
Color white 
Pre-Laid Self-Adhesive HDPE/EVA Waterproofing MembranePre-Laid Self-Adhesive HDPE/EVA Waterproofing Membrane
Features 

1.Good bonding with concrete applied on membrane, to block water between membrane and concrete further to protect concrete effectively.
2.Low flatness requirement to substrate, reliable overlapping; mechanical fixing, easy application.
3. Good puncture resistance performance.
4.Adaptable to settlement and distortion.
5.Weather resistance and anti-UV.
6.Resist to acid, alkali, mold.
7.Eco-friendly material
Pre-Laid Self-Adhesive HDPE/EVA Waterproofing Membrane
Application

1.Basement , Subway , Tunnel , Cave and Other underground public constructions
2.The roofing of industrial and civil building :planting roof, flat roof ,pitched roof
3.Artificial lake , reservoir ,landfill ,basement ,grain depot , etc
Pre-Laid Self-Adhesive HDPE/EVA Waterproofing Membrane
Installation 

1. Substrate preparation
Remove all protrusions and clean up the substrate 
2. Install membrane(loosely laid)
Loosely lay the membranes onto the substrate (ensure the adhesive side to face upward) 
3. Rolls Overlapping
(1) Cut edges
Tear down the release film, adhere adjacent membranes together, then using tools to press overlapping area to insure firm bonding (if you need, heat the overlapping area, then proceed with overlapping) 
(2) Roll end laps
Position special tape strip of appropriate sizes over the lap of beneath membrane, then melt the strip using hot-air welding gun and immediately overlap the adjacent membranes together. Press firmly over lapping area to achieve seamless joints. 
4. Tie up reinforcement ,cast concrete and proceed with other subsequent architectural jobs.
Pre-Laid Self-Adhesive HDPE/EVA Waterproofing Membrane
Factory 
Pre-Laid Self-Adhesive HDPE/EVA Waterproofing MembranePre-Laid Self-Adhesive HDPE/EVA Waterproofing Membrane

You Might Also Like