3.2x13m Slag mill
Description of Slag Ball Mill: 
This slag ball mill is a key machine mainly used to process materials from crushing process, and it is widely used in various manufacture industries, like cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics. Besides, it can also used in dry and wet grinding for all kinds of ores and other grindable materials.
Technical specification
( Edge driving )
I. Technical parameter & technical performance
1.    Specification: Φ3.2×13m
2.    Production capacity: 20-25t/h ( Open circuit, Slag feeding size:≤25mm, Feeding moisture: ≤0.5%, Feeding temperature:≤50ºC, Wind speed in mill,1.1-1.2m/s, Specific surface area:≥420m2/kg
3.    Rotary speed of mill: 18.7 r/min
4.    Charging capacity of grinding medium: 126t
5.    Main motor: (Jiangsu Motor Plant)
Model: YR1600-8/1430, Power: 1600kw, Rotary speed: 743 r/min, Voltage: 10 kv
6.    Main reducer:
Model: MBY900, Hardened gear surface ( Nanjing High-speed Gear box plant )
7.    Auxiliary motor
Model: YEJ225M-8,  Power: 22kw,  Rotary speed: 740r/min
8.    Auxiliary reducer
Model: ZSY315-II,Speed ratio: i=100,Input rotary speed:740r/min
9.    Cooling method: Water cooling
10.  Lubricating method: Thin oil station ( GYXZ-40A )
(1)   Low pressure system
 Flow: 40L/min, Oil supply pressure: 0.4Mpa, Pump model: CB-B63
Oil supply temperature: 40±3ºC, Motor: Y112M-6 B35 2.2kw
(2)   High pressure system
 Pump model: 2.5MCY14-18,   Flow: 2.5L/min,
 Oil supply pressure: 32Mpa    Motor: Y112M-6  2.2kw
(3)   other performances
volume of oil box: 1m3
Filtering precision: 0.08mm
Filtering area: 0.19m2
         Cooling area: 5m2
         Cooling water consumption: 3.6m2/h
         Heater power: 3kw×3
         Working medium: N22-n320
11.  Weight of equipment: 223t
II. Main parts & components, and their materials
1. Main motor: YR1600-8/1430   1600kw   10kv
2. Main reducer: MBY900
3. Auxiliary motor: YEJ225M-8    22kw
4. Auxiliary reducer: ZSY315-II i=100
5. Shell: Q235-B   Plate thickness: 32
6. Hollow Shaft: ZG230-570( ZG45 )
7. Bull gear: ZG310-570 ( zg45)
8. Pinion: 40Cr ( Quenching and tempering )
9. Main bushing: The lower seat: HT250
              Bushing body: HT250
              Bushing liner: ( Babbitt alloy ZchSnSb11-6 )
10. Lining board: Medium chrome alloy
11. Single partition: Medium chrome alloy
III. Supply scope
      1. Rotary part                1set
      2. Feeding device             1set
      3. Main bearing device         2set
      4. Discharging device          1set
      5. Lining board and partition plant    1set
      6. Driving device ( Bull gear, pinion and housing)    1Unit/set
      7. Main motor                     1Unit
      8. Main reducer                    1Unit
      9. Auxiliary motor                  1Unit
      10. Auxiliary reducer                1Unit
      11. Thin oil station                  2Pcs
      12. Shaft coupling                  1Unit/set
      13. Base of motor and reducer         1Unit/set
      14. Control part                     1Unit

Technical Parameters of Slag Ball Mill: