Clear Hardness Epoxy Resin for Badges
China Clear Hardness Epoxy Resin for Badges, Find details about China Epoxy Resin, Hard Epoxy from Clear Hardness Epoxy Resin for Badges
Basic Info.
Model NO.
312AB-8
Main Agent Composition
Thermosetting Resin
Characteristic
Waterproof
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Colorless,Transparent
Shelf Life
6months
Mixing Ratio
3:1
Curing Time
8-10hours
OEM
Available
Trademark
Jinhua glue
Transport Package
20kgs/Set
Specification
SGS, ROHS, STC
Origin
China
HS Code
3506912000
Model NO.
312AB-8
Main Agent Composition
Thermosetting Resin
Characteristic
Waterproof
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Colorless,Transparent
Shelf Life
6months
Mixing Ratio
3:1
Curing Time
8-10hours
OEM
Available
Trademark
Jinhua glue
Transport Package
20kgs/Set
Specification
SGS, ROHS, STC
Origin
China
HS Code
3506912000
Product Desciption
Feature
Epoxy resin 312AB-8 can be cured under normal temperature and low temperature, natural defoaming, anti-yellow, high transparency, no ripple, bright in surface, it can be cured faster at high temperature. ..
Application
312AB-8 can be widely used for high quality LED channel letter, photo frame, drops of glue, signs, cards, crafts, lamp potting and mold filling, etc..
Detailed information
Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
Caution
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.
Storage And Shelf Life
1, Store at the temperature of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C.
Below is some factory photos for your references
Samples are available! Please contact us if any questions.
Epoxy resin 312AB-8 can be cured under normal temperature and low temperature, natural defoaming, anti-yellow, high transparency, no ripple, bright in surface, it can be cured faster at high temperature. ..
Application
312AB-8 can be widely used for high quality LED channel letter, photo frame, drops of glue, signs, cards, crafts, lamp potting and mold filling, etc..
Detailed information
| Model 312AB-8 | Main agent 312A-8 | Curing agent 312B-8 |
| Properties before Hardening | ||
| Color | Colorless transparent | Colorless transparent |
| Specific gravity | 1.15 | 0.96 |
| Viscosity(25ºC) | 2000-4000CPS | 100 MAXCPS |
| Conditions of Usage | ||
| Mixing ratio | A: B = 100:33(weight ratio)>3:1 | |
| Hardening conditions | 25 ºC×8H to 10H or 55ºC×1.5H (2 g) | |
| Usable time | 25ºC×40min (100g) | |
| Properties after Hardening | ||
| Hardness, shore D | <85 | |
| Withstand voltage, KV/mm | 22 | |
| Flexural strength, Kg/mm2 | 28 | |
| Volume resistivity, Ohm3 | 1x1015 | |
| Surface resistance, Ohmm2 | 5X1015 | |
Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
Caution
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.
Storage And Shelf Life
1, Store at the temperature of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C.
Below is some factory photos for your references
Samples are available! Please contact us if any questions.
You Might Also Like
All Kinds of Chassis Compatible 37m Concrete Pump Truck in H......
China Factory Price Aluminum Traffic Sign Board for Export
Shenzhen Whosale Korea Mobile Phone S4 I9505
China Farm Machinery Disc Harrow Tractor Attachments Cultiva......
Luen 2021 13000* 2550 *1650 Skeleton Container Semi Trailer ......
BSPT DN15 1000wog SS316 2PC Ball Valve DIN SS304
RC3/4' Precision Compressed Air Filter for Refrigerate A......
Power Line Accessories NLL Series Aerial Strain Clamp with 2......
All Color Ink! ! Pigment Ink for Epson Printer
Custom Size Thickness Aluminum Foil Tape Duct Insulation Tap......