Crystal Clear Two Parts Clear Epoxy Resin for Epoxy 3D Floor Coating
China Crystal Clear Two Parts Clear Epoxy Resin for Epoxy 3D Floor Coating, Find details about China Clear Epoxy, Clear Resin from Crystal Clear Two Parts Clear Epoxy Resin for Epoxy 3D Floor Coating
Basic Info.
Model NO.
312AB-H3
Characteristic
Waterproof
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Clear
Mixing Ratio
3:1
Curing Time
6hours
OEM
Available
Lead Time
3days
Trademark
Jinhua glue
Transport Package
5kgs 20kgs
Specification
ROHS, REACH, CPSIA, PAHS
Origin
China
HS Code
3506912000
Model NO.
312AB-H3
Characteristic
Waterproof
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Clear
Mixing Ratio
3:1
Curing Time
6hours
OEM
Available
Lead Time
3days
Trademark
Jinhua glue
Transport Package
5kgs 20kgs
Specification
ROHS, REACH, CPSIA, PAHS
Origin
China
HS Code
3506912000
Product Desciption
Epoxy Resin 113AB-1
Feature
Epoxy resin 113AB-1 can be cured under normal temperature and low temperature, with good flowing property, natural defoaming, anti-yellow, high transparency, no ripple, bright in surface, it can be cured faster at high temperature. ..
Application
312AB-8 can be widely used for high quality LED channel letter, photo frame, drops of glue, signs, cards, crafts, lamp potting and mold filling, etc..
Properties before Hardening
Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
Properties after Hardening
Caution
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.
Storage And Shelf Life
1, Store at the temperature of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C.
Feature
Epoxy resin 113AB-1 can be cured under normal temperature and low temperature, with good flowing property, natural defoaming, anti-yellow, high transparency, no ripple, bright in surface, it can be cured faster at high temperature. ..
Application
312AB-8 can be widely used for high quality LED channel letter, photo frame, drops of glue, signs, cards, crafts, lamp potting and mold filling, etc..
Properties before Hardening
| Part | 113A-1 | 113B-1 |
| Color | Transparent | Transparent |
| Specific gravity | 1.15 | 0.96 |
| Viscosity (25ºC) | 2000-4000CPS | 100 MAXCPS |
| Mixing ratio | A: B = 100:33(weight ratio) | |
| Hardening conditions | 25 ºC×8H to 10H or 55ºC×1.5H (2 g) | |
| Usable time | 25ºC×40min (100g) | |
Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
Properties after Hardening
| Hardness, shore D | <85 |
| Withstand voltage, KV/mm | 22 |
| Flexural strength, Kg/mm2 | 28 |
| Volume resistivity, Ohm3 | 1x1015 |
| Surface resistance, Ohmm2 | 5X1015 |
| Thermal conductivity, W/M.K | 1.36 |
| Induced electric loss, 1KHZ | 0.42 |
| Withstand high temperature, ºC | 80 |
| Moisture absorption, % | <0.15 |
| Compressive strength, Kg/ mm2 | 8.4 |
Caution
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.
Storage And Shelf Life
1, Store at the temperature of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C.
You Might Also Like
Direct Supply High Quality Yk11 Great Strength Sarms Powder ......
Sharpy 330W Moving Head Beam 15r
( TPU ) Lubrizol Estane 5701/5707/5713/5714 Thermoplastic Po......
Second Hand Used Zx65 Cheap Good Mini Excavator Ex60 Hydraul......
2021 Cheap Plush Toy Pendant Custom Soft Keychain Plush Toy ......
Plastic Tarp Polyethylene UV Resistance Waterproof Truck Cov......
Optical Brightener CBS-X for Detergent
Merchant Wire -Black Annealed Wire for Building Construction
2021 New Face Brush Private Label Waterproof Pore Cleaner Mi......
D-SUB Mini Dsub PCB Electronic Computer Connector ( dB15F +1......