High Quality Crystal Craft Clear Casting Epoxy Resin
China High Quality Crystal Craft Clear Casting Epoxy Resin, Find details about China Epoxy Resin, Epoxy Glue from High Quality Crystal Craft Clear Casting Epoxy Resin
Basic Info.
Model NO.
312A/B-6
Characteristic
Waterproof
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Clear
Shelf Life
Six Months
Component Rate
3:1
Package
5kgs; 20kgs
MOQ
20kgs
Lead Time
3 Days
Trademark
Jinhua glue
Transport Package
20kg/Set, Carton
Specification
SGS, ROHS, REACH, CPSIA, PAHS
Origin
Shenzhen, Guangdong, China
HS Code
3506912000
Model NO.
312A/B-6
Characteristic
Waterproof
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Clear
Shelf Life
Six Months
Component Rate
3:1
Package
5kgs; 20kgs
MOQ
20kgs
Lead Time
3 Days
Trademark
Jinhua glue
Transport Package
20kg/Set, Carton
Specification
SGS, ROHS, REACH, CPSIA, PAHS
Origin
Shenzhen, Guangdong, China
HS Code
3506912000
Product Desciption
Epoxy Resin 312AB-6
Feature
Soft Epoxy resin 312AB-6 can be cured under normal temperature or high tempeture, with good flowing properity, natural defoaming, anti-yellowing, high transprancy, no ripple, bright in surface.
Application
312AB-6 can be widely used for ornament decoration, ,signs, crafts, lighting, LED channel letter, lamp potting and mould filling, etc..
Properties before Hardening
Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
Properties after Hardening
Caution
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.
Storage And Shelf Life
1, Store at the tempeture of 25°C or cool and dry place. Avoid from sunlight, high tempeture or hign humidity enviroment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room tempeture of 25°C.
FREE SAMPLE IS AVAILABLE!!!
This high transparency epoxy resin adhesive can be widely used for crafts, photo frame coating, nameplate, badge, LED channel Letter, jewelry, small gifts, promotional items, easy to operate, good flowing property, no ripple, natural defoaming, glossy in surface after cured. Pls come us to us for more info, or discuss your application for a best epoxy solution.
Feature
Soft Epoxy resin 312AB-6 can be cured under normal temperature or high tempeture, with good flowing properity, natural defoaming, anti-yellowing, high transprancy, no ripple, bright in surface.
Application
312AB-6 can be widely used for ornament decoration, ,signs, crafts, lighting, LED channel letter, lamp potting and mould filling, etc..
Properties before Hardening
| Part | 312A-6 | 312B-6 |
| Color | Transparent | Transparent |
| Specific gravity | 1.15 | 0.97 |
| Viscosity (25ºC) | 2000-4000CPS | 100MAXCPS |
| Mixing ratio | A: B = 100:33(weight ratio) | |
| Hardening conditions | 25 ºC×8H to 10H or 55ºC×1.5H (2 g) | |
| Usable time | 25ºC×40min (100g) | |
Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
Properties after Hardening
| Hardness, shore D | <86 |
| Withstand voltage, KV/mm | 22 |
| Flexural strength, Kg/mm2 | 28 |
| Volume resistivity, Ohm3 | 1x1015 |
| Surface resistance, Ohmm2 | 5X1015 |
| Thermal conductivity, W/M.K | 1.36 |
| Induced electric loss, 1KHZ | 0.42 |
| Withstand high temperature, ºC | 80 |
| Moisture absorption, % | <0.15 |
| Compressive strength, Kg/ mm2 | 8.4 |
Caution
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.
Storage And Shelf Life
1, Store at the tempeture of 25°C or cool and dry place. Avoid from sunlight, high tempeture or hign humidity enviroment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room tempeture of 25°C.
FREE SAMPLE IS AVAILABLE!!!
This high transparency epoxy resin adhesive can be widely used for crafts, photo frame coating, nameplate, badge, LED channel Letter, jewelry, small gifts, promotional items, easy to operate, good flowing property, no ripple, natural defoaming, glossy in surface after cured. Pls come us to us for more info, or discuss your application for a best epoxy solution.
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......