Products

Industrial Dust Extractors for Plasma Cutting Table Dust Collector Manufacture with Ce

China Industrial Dust Extractors for Plasma Cutting Table Dust Collector Manufacture with Ce, Find details about China Dust Extractor, Industrial Dust Collector from Industrial Dust Extractors for Plasma Cutting Table Dust Collector Manufacture with Ce

Model NO.
WLC-4YT
Model
Wlc-4yt
Air Volume
4000m3/H
Engine Power
5.5kw
Model of Dedusting
Automatic Dedusting
Air Intake Dimension
Diameter 350
Net Weight
700
Location
Indoor
Filter Efficiency
99.99%
Ash Bucket Capacity
40L
Compressed Air Requirement
0.5~0.6MPa
Key Words
Dust Extractor
Trademark
Welldone
Transport Package
Ply Wooden Bases/Paper Box/Wooden Box
Specification
1100mm*1100mm*2600mm
Origin
Changsha, China
HS Code
8421392990
Model NO.
WLC-4YT
Model
Wlc-4yt
Air Volume
4000m3/H
Engine Power
5.5kw
Model of Dedusting
Automatic Dedusting
Air Intake Dimension
Diameter 350
Net Weight
700
Location
Indoor
Filter Efficiency
99.99%
Ash Bucket Capacity
40L
Compressed Air Requirement
0.5~0.6MPa
Key Words
Dust Extractor
Trademark
Welldone
Transport Package
Ply Wooden Bases/Paper Box/Wooden Box
Specification
1100mm*1100mm*2600mm
Origin
Changsha, China
HS Code
8421392990
Industrial Dust Extractors for Plasma Cutting Table Dust Collector Manufacture with Ce 
Industrial Dust Extractors for Plasma Cutting Table Dust Collector Manufacture with Ce


Part 1: dust extractor application
Plasma cutting is different from Welding or laser cutting. It have more fume during working. Choosing one good quality dust collector is very meaningful.  Welldone can offer the most effective solution according to the working condition, and decrease the plasma fume damage to production.


Part 2: Techinical discription

The side suction type dust remover system for gantry cutting machine is mostly used in plasma cutter fume extractor.  Add one suction air tube and suction air mouth on one side of the cutting table, the other side fixed blow air devices; Or add tube sand suction air mouths on each side of the cutting table. The suction air mouth can move with the cutting head. When the cutting nozzle working, the fume can be sucked through the suction air mouth. The sealed belt is used to make sure no fume spread.  When the suction nozzle moved, the wheel move with it will open the suction air mouth. The fume been collected to the dust collector.
Industrial Dust Extractors for Plasma Cutting Table Dust Collector Manufacture with Ce


Part 3: WLC series machine feature
(1)End cap filter cartridge with PTFE(polytetrafluoroethylene) layer, high effciency, and easy to replace.
(2)Integrated design-fan,motor and filtering in one body, small size, low noise(less than 65db), easy maintenance and lower cost.
(3)The light color design makes the vision more lively.
(4)Energy consumption and heat rate are 10% lower than domestic electric motors.
(5)PLC control system, longer service life and easily installation.
(6)Application-welding fume,plasma and laser cutting, polishing and so on.
(7)Air volume 4000~16000m3/h for choose; 3 years warranty on fan and motor/1years warranty on filter......
........


Part 4: Techical parameter of Industrial Dust Extractors for Plasma Cutting Table Dust Collector Manufacture with Ce 
ModeWLC-4YTWLC-6YTWLC-9YTWLC-12YTWLC-16YT
Voltage/Phase/frequency380V/3PH/50HZ380V/3PH/50HZ380V/3PH/50HZ380V/3PH/50HZ380V/3PH/50HZ
Air volume4000m³/h6000m³/h9000m³/h12000m³/h16000m³/h
Engine power5.5kw7.5kw11kw15kw18.5kw
Filter efficiency99.99%99.99%99.99%99.99%99.99%
Filter 4-Φ324*860mm6-Φ324*860mm9-Φ324*860mm12-Φ324*860mm16-Φ324*860mm
Anti-blow valve quantity4691216
Ash bucket capacity40L60L60L114L2*81L
dB<75db<75db<75db<80db<85db
Compressed air requirement0.5-0.6MPa0.5-0.6MPa0.5-0.6MPa0.5-0.6MPa0.5-0.6MPa
Outside demension1100*1100*2600mm1200*1320*2720mm1450*1450*2720mm1550*1690*2870mm1980*1690*2870mm
Air intake demensionΦ350mmΦ380mmΦ450mmΦ550mmΦ600mm
OptionAnti-explosionAnti-explosionAnti-explosionAnti-explosionAnti-explosion
OptionFrequency conversionFrequency conversionFrequency conversionFrequency conversionFrequency conversion
OptionWireless remote controlWireless remote controlWireless remote controlWireless remote controlWireless remote control
OptionActivated carbon filtrationActivated carbon filtrationActivated carbon filtrationActivated carbon filtrationActivated carbon filtration
Part 5: Application cases pictures
Industrial Dust Extractors for Plasma Cutting Table Dust Collector Manufacture with Ce
Industrial Dust Extractors for Plasma Cutting Table Dust Collector Manufacture with Ce
Industrial Dust Extractors for Plasma Cutting Table Dust Collector Manufacture with Ce
Industrial Dust Extractors for Plasma Cutting Table Dust Collector Manufacture with Ce

Part 6:  Why choose Welldone? 
1.Patent design,  CE, ISO9001, ISO14001, and OHSAS18001 certificate approved.
2.Fine details design, like 2-3mm thickness metal, 80mm noise damping cutton...
3.Advanced patent design filter,  0.02-99.9% efficiency,  8000h lifetime. PTFE coated, Import from Japan. easy pass government inspection
4.Famous machine components.
5.3 years warranty on fan and motor, 1 years warranty on filter
6. Manufacture directly sales, lower price, better services and easy maintance.
.......

Part 7:  Company introduction
Industrial Dust Extractors for Plasma Cutting Table Dust Collector Manufacture with Ce
 

Quickly contact us if you are interested in our products:
Tel: +86 0731-86398162
 
Welldone Environmental Protection Equipment (Changsha) Co., Ltd
Website: welldoneexport.en.made-in-china.com
 

You Might Also Like