UL recognize

Applications
Constant Temperature and humidity test chamber is used to test material structure or composite, in the high temperature and ultralow temperature continuous environment.
Toleration of these material to these circumstance. Test chemical change or physical damage caused by their expansion and contraction. Suitable for electronic, LED lighting industry, auto parts, chemical industry, building materials, mobile computers, batteries, plastic, metal, rubber etc. Material.
Under condition of high and low temperature change, test various performance reliability index of related product spare parts and materials for institutions of higher learning, scientific research units etc. Can be used as the basis of improving product or reference.

Standard configuration
Sight window*1, cable port(portΦ 50mm)*1, shelves*2, chamber lamp*1, power cable *2m
No fuse breaker, over pressure, over heat and over current protection for compressor,
Over temperature protection, over load protect of blower, dry heat protection

Features
A. Reliability testing based on current test standards in the temperature range of -40 ° C to 180 ° C and 10% to 98% R. H.
B. The ideal simulation chamber for all heat and cold testing in the traditional temperature range -40 º C and 150 º C.
C. Forced ventilation loops design, balance temperature & humidity control system (BTHC).
D. We can provide custom-made machine and optional accessories satisfied your special requirements.

Optional accessories
Cable Port: Φ 100mm cable port is available
Shelves
Ro-type water purifier: R-80/day
Provide to keep the humidifying heater and wet bulb wick free from scale.
Inner glass door with operation port
A glass door can be provided behind the main door so that specimens can be observed. Two operation ports of 130mm diameter are used for handing specimens inside the chamber without opening the glass door.
Dehumidifier
The rotation regenerating dehumidifier M-120 ensures precise control of low humidity (5º C 5%RH) for electrostatic reliability tests.
Temperature and humidity recorder
-100 to +150º C/0 to 100%RH 100mm with effective width 100mm and 2 pen
Temperature 1 pen and humidity 1 pen.
-100 to +150º C/0 to 100%RH 100mm with effective width 100mm and 6 dots
Temperature 3 dots and humidity 1 dot.
-100 to +150º C/0 to 100%RH 100mm with effective width 180mm and 12 dots
Temperature 6 dots and humidity 6 dots.
Defrosting circuit
The chamber automatically detects and melts the frost on the evaporator when operating below 0º C.
Liquid or infection
In order to rapidly decrease the temperature inside the chamber, a cylinder of liquid can be connected the chamber.

After-service
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.

Company introduction
Komeg has business on reliability test equipment for more than 20years.
KOMEG is widely recognized and commended bu the top 500comopanies and also customers from electronic, computer, home appliance, communications, chemical industry and scientific reseach.
In 2003, Komeg did the reseach and development of the main equipment with the Pecking University for state key laboratory of environment and pollution simulation(located in Shenzhen HIgh-Tech Park, and funded by national natural science foundation. )