Electrical Cable Wire Plastic Winding Cutting Insulation Extrusion Extruder Machine
China Electrical Cable Wire Plastic Winding Cutting Insulation Extrusion Extruder Machine, Find details about China Cable Machine, Extruder Machine from Electrical Cable Wire Plastic Winding Cutting Insulation Extrusion Extruder Machine
Basic Info.
Trademark
SUNTECHMACH
Specification
30m
Origin
China
HS Code
8477209000
Trademark
SUNTECHMACH
Specification
30m
Origin
China
HS Code
8477209000
Product Desciption
I. Usage:
Suitable for PVC, PE wire cable extrusion
II. Design parameter:
III. Equipment list
IV. Equipment introduction:
1. Ф400-500 Active tension wire pay off machine
1) Spool size: 500-630 mm or customized design
2) Shafts topping way: shaft type
3) Weight: ~300kg
2. Ф70 straightening platform
1) Ф70 single groove straightening wheel: 3 pcs
2) Straightening wheel position: Up and down adjustment based on requirement
3) Center height: 1000m
4) Overall dimension: 480*250*1040mm
5) Weight: 50kg
3. Ф50 main extrusion machine
1) Power: 11KW AC motor + inverter
2) Gear box: ZYJ-146 Grinding gear
3) Screw: Ф50mm, L/D=26:1, Speed: 10-110RPM, Material: SACM-2, surface hard chrome plating after nitriding treatment, suits for the extrusion of PVC, PE.
4) Screw tank: Material: SACM-1, surface nitriding treatment, hardness: HRC60-63, 3 temperature measurement points.
5) Screw tank heating: Electric heating, 380V/50HZ, 3 sections heating section (AL), total 10KW.
6) Cooling type of screw tank: High pressure centrifugal fan, 380V/180W, each section with one.
Feeding part water cooling.
7) Extrusion head clipping method: Screw-type bilateral clamping type with 1 temperature measurement point
8) Total power: 21.54KW
9) Overall dimension: 2200*1000*2500mm
10) Weight : 1500kg
4. 2m pre water tank
1) Material: SUS304 Stainless steel
2) Length: 2000mm
3) Tank size: 140mm (H)*180mm (W)
4) Movement adjusting: 800mm
5) Tank shape: U shape
6) Weight: 70kg
5. 8m single layer U shape water tank
1) Material: SUS304 Stainless steel
2) Length: 8000mm
3) Tank size: 140mm (H)*180mm (W)
4) Overall dimension: 8000*210*1140mm
5) Support: 3pcs
6) Weight: 120KG
6. Ф400 double wheels water tank tracking machine
1) Power: 4KW AC motor + inverter
2) Tracking type: Double wheels water tank
3) Tracking speed: Max 300m/min
4) Tracking wheel: Aluminum alloy material, U shape 4 grooves
5) Diameter of tracking wheel: Ф400mm
6) Tank body material: SUS304 stainless steel
7) Overall dimension: 1260*780*1160mm
8) Weight: 480kg
7. 9m horizontal wire store frame
1) Store type: Horizontal type, 9m long
2) Power: 1.5KW motor +10kg Magnetic clutch
3) Range of tension force: 350N, free adjustment
4) Transmission: Multi-core wire rope
5) Length of wire store: Within 150m
6) Wire guiding wheel: Ф300mm, Aluminum alloy material, 10 wheels+9wheels
7) Anti-collision device: Compressed spring
8) Control cabinet: DC-24 power source motor inverse control, tension force adjustment
9) Overall dimension: 9000*600*2600mm
10) Weight: 650kg
8. Ф630 double position wire take up machine
1) Wire cable: Max 6mm
2) Speed: 200m/min
3) Power: 2.2KW AC motor *2, inverter speed adjust, speed match with main machine.
4) Metering device: Automatic stop when reach to set value
5) Sparker: Automatic alarming when spark breakdown
6) Wire arranging: Ф30mm screw lead*2
7) Overall dimension: 1300*800*1160mm
8) Weight: 600kg
9. Drying machine
1) Volume: 75kg
2) Alarming: No material alarming
3) Control: PID control, LED display
10. 50kg material suction machine
1) Capacity: 50kg/h
2) Motor: 1 KW
3) Diameter of feeding pipe: Ф38mm
11. Meter device
1) Type: Single direction metering
2) Diameter of metering wheel: Ф159mm
3) Metering: 500mm/r
4) Overall dimension: 200*140*360mm
5) Weight: 15kg
12. High speed printer:
1) Printing speed: 200m/min
2) Printing wheel: Outer diameter Ф100mm, inner diameterФ20mm
3) Printing quality: Meets UL,CSA,VDE,JIS,T-MARK standard
13. Main control cabinet (system and temperature system control)
1) Power: 380V, 50HZ, 3Phase
2) Process control: Switch control machine power, button control machine working state.
3) Temperature control: 5 control section, Temperature control table
4) Power control: Master switch and each branch switch control
5) Motor control: Inverter control
6) Indicates table control: 5 section temperature control accurate control 5 temperature zones.
7) Control of accessory accessories: In one control system, high automation level.
V. Reference photos:
VI. Packaging & Shipping
We can pack it by pallet, or according to the customers' specific requirements.
VII. Our Services
In order to guarantee the customers are able fully to operate the machine, if the customer need, we can help customer training, includes:
1. Correct operating mode
2. Correct maintenance way
3. Remove simple problem
VIII. RFQ:
Dear customer,
Thanks for your viewing.
For better recommendation, pls tell us the follow information when sending us inquiry.
1. Cable structure and size
2. Plastic material
3. Photos of cable
4. Cable core mateiral
Thanks and best regards
Suitable for PVC, PE wire cable extrusion
II. Design parameter:
| No. | Item | Parameter |
| 1 | Diameter of core | Ф0.4mm-5mm |
| 2 | Diameter of finished | Ф0.8mm-20mm |
| 3 | Extrusion capacity | 100KG/H (Extrusion head open, soft PVC) |
| 4 | Speed | 300m/min |
| 5 | Center height of machine | 1000mm |
III. Equipment list
| No. | Item | Qty. |
| 1 | Ф500-630 pay off frame | 1 set |
| 2 | Ф70 straightening platform | 1 set |
| 3 | Ф50/Ф70/Ф90/Ф120 main extrusion machine | 1 set |
| 4 | 2m pre water tank | 1 set |
| 5 | 8m single layer U shape water tank | 1 set |
| 6 | Ф400/Ф500/Ф630 double wheels water tank tracking machine | 1 set |
| 7 | 9m horizontal wire store frame | 1 set |
| 8 | Ф630 double position wire take up machine | 1 set |
| 9 | Main control cabinet(system and temperature system control) | 1 set |
| 10 | 50kg material suction machine | 1 set |
| 11 | Drying machine | 1 set |
| 12 | Ink jet Printer | 1 set |
| 13 | Metering device | 1 set |
IV. Equipment introduction:
1. Ф400-500 Active tension wire pay off machine
1) Spool size: 500-630 mm or customized design
2) Shafts topping way: shaft type
3) Weight: ~300kg
2. Ф70 straightening platform
1) Ф70 single groove straightening wheel: 3 pcs
2) Straightening wheel position: Up and down adjustment based on requirement
3) Center height: 1000m
4) Overall dimension: 480*250*1040mm
5) Weight: 50kg
3. Ф50 main extrusion machine
1) Power: 11KW AC motor + inverter
2) Gear box: ZYJ-146 Grinding gear
3) Screw: Ф50mm, L/D=26:1, Speed: 10-110RPM, Material: SACM-2, surface hard chrome plating after nitriding treatment, suits for the extrusion of PVC, PE.
4) Screw tank: Material: SACM-1, surface nitriding treatment, hardness: HRC60-63, 3 temperature measurement points.
5) Screw tank heating: Electric heating, 380V/50HZ, 3 sections heating section (AL), total 10KW.
6) Cooling type of screw tank: High pressure centrifugal fan, 380V/180W, each section with one.
Feeding part water cooling.
7) Extrusion head clipping method: Screw-type bilateral clamping type with 1 temperature measurement point
8) Total power: 21.54KW
9) Overall dimension: 2200*1000*2500mm
10) Weight : 1500kg
4. 2m pre water tank
1) Material: SUS304 Stainless steel
2) Length: 2000mm
3) Tank size: 140mm (H)*180mm (W)
4) Movement adjusting: 800mm
5) Tank shape: U shape
6) Weight: 70kg
5. 8m single layer U shape water tank
1) Material: SUS304 Stainless steel
2) Length: 8000mm
3) Tank size: 140mm (H)*180mm (W)
4) Overall dimension: 8000*210*1140mm
5) Support: 3pcs
6) Weight: 120KG
6. Ф400 double wheels water tank tracking machine
1) Power: 4KW AC motor + inverter
2) Tracking type: Double wheels water tank
3) Tracking speed: Max 300m/min
4) Tracking wheel: Aluminum alloy material, U shape 4 grooves
5) Diameter of tracking wheel: Ф400mm
6) Tank body material: SUS304 stainless steel
7) Overall dimension: 1260*780*1160mm
8) Weight: 480kg
7. 9m horizontal wire store frame
1) Store type: Horizontal type, 9m long
2) Power: 1.5KW motor +10kg Magnetic clutch
3) Range of tension force: 350N, free adjustment
4) Transmission: Multi-core wire rope
5) Length of wire store: Within 150m
6) Wire guiding wheel: Ф300mm, Aluminum alloy material, 10 wheels+9wheels
7) Anti-collision device: Compressed spring
8) Control cabinet: DC-24 power source motor inverse control, tension force adjustment
9) Overall dimension: 9000*600*2600mm
10) Weight: 650kg
8. Ф630 double position wire take up machine
1) Wire cable: Max 6mm
2) Speed: 200m/min
3) Power: 2.2KW AC motor *2, inverter speed adjust, speed match with main machine.
4) Metering device: Automatic stop when reach to set value
5) Sparker: Automatic alarming when spark breakdown
6) Wire arranging: Ф30mm screw lead*2
7) Overall dimension: 1300*800*1160mm
8) Weight: 600kg
9. Drying machine
1) Volume: 75kg
2) Alarming: No material alarming
3) Control: PID control, LED display
10. 50kg material suction machine
1) Capacity: 50kg/h
2) Motor: 1 KW
3) Diameter of feeding pipe: Ф38mm
11. Meter device
1) Type: Single direction metering
2) Diameter of metering wheel: Ф159mm
3) Metering: 500mm/r
4) Overall dimension: 200*140*360mm
5) Weight: 15kg
12. High speed printer:
1) Printing speed: 200m/min
2) Printing wheel: Outer diameter Ф100mm, inner diameterФ20mm
3) Printing quality: Meets UL,CSA,VDE,JIS,T-MARK standard
13. Main control cabinet (system and temperature system control)
1) Power: 380V, 50HZ, 3Phase
2) Process control: Switch control machine power, button control machine working state.
3) Temperature control: 5 control section, Temperature control table
4) Power control: Master switch and each branch switch control
5) Motor control: Inverter control
6) Indicates table control: 5 section temperature control accurate control 5 temperature zones.
7) Control of accessory accessories: In one control system, high automation level.
V. Reference photos:
VI. Packaging & Shipping
We can pack it by pallet, or according to the customers' specific requirements.
VII. Our Services
In order to guarantee the customers are able fully to operate the machine, if the customer need, we can help customer training, includes:
1. Correct operating mode
2. Correct maintenance way
3. Remove simple problem
VIII. RFQ:
Dear customer,
Thanks for your viewing.
For better recommendation, pls tell us the follow information when sending us inquiry.
1. Cable structure and size
2. Plastic material
3. Photos of cable
4. Cable core mateiral
Thanks and best regards
You Might Also Like
Inch Size R Series Open-Zz-2RS Deep Groove Ballbearings R144......
Dried Mealworms for Tropicl Fish
Wc67k Series Economic Type CNC Hydraulic Press Brake
White Cranked Espag UPVC Window Hardware Handle
VFD 37kw/45kw 380V Inverter Torque Control Motor Frequency I......
0.9mx9m 14mm Multiple Color PVC Coil Plastic Mat
Stainless Steel Broken Reverse Twill Dutch Weave Wire Mesh 1......
Factory Price of Sodium Pyrrolidone Carboxylate CAS 28874 -5......
60Hz 1800rpm 50kVA/40kw Perkins Engine Diesel Generator Set ......
Blue Simple Rubber Squeeze Shower Duck
Jaw Crusher Low Price Mining Crushing Machine Zhengzhou
25mm Sturdy Steel Cam Buckles Motorbike Tie-Down Straps Asse......