7.5m³ /Min RC1-1/2" Coalescing Particulate Removal Air Compressor Filter
China 7.5m³ /Min RC1-1/2" Coalescing Particulate Removal Air Compressor Filter, Find details about China Carbon Filter, Compressed Air Filter from 7.5m³ /Min RC1-1/2" Coalescing Particulate Removal Air Compressor Filter
Basic Info.
Model NO.
DT019
Connection
RC1-1/2"
Flow Rate
7.5m³/Min
Material
Aluminum Alloy
Maxi. Operate Pressure
2.0 MPa
Operate Temperature
1.5~80ºC
Filtration Performance
From 5 μm to 0.01μm
Resistance Corrosion
Inside and Outside with 20μm Thickness
Housing Serve Lige
15 Years
Filtration Efficiency
99.99%
Element Material
Sodium Borosilicate Glass Fiber
Element Serve Life
6000~8000 Hours
Work with
Air Compressor
Element Design
Without Tie-Rod
Auto Drain Parts
Anti-Collision Nut
Parallel Design
Available
Trademark
YUKA
Transport Package
Brown Inner Box & Cardboard
Specification
Dimension: 133X 113.9X 533.7mm
Origin
China
HS Code
8421399090
Model NO.
DT019
Connection
RC1-1/2"
Flow Rate
7.5m³/Min
Material
Aluminum Alloy
Maxi. Operate Pressure
2.0 MPa
Operate Temperature
1.5~80ºC
Filtration Performance
From 5 μm to 0.01μm
Resistance Corrosion
Inside and Outside with 20μm Thickness
Housing Serve Lige
15 Years
Filtration Efficiency
99.99%
Element Material
Sodium Borosilicate Glass Fiber
Element Serve Life
6000~8000 Hours
Work with
Air Compressor
Element Design
Without Tie-Rod
Auto Drain Parts
Anti-Collision Nut
Parallel Design
Available
Trademark
YUKA
Transport Package
Brown Inner Box & Cardboard
Specification
Dimension: 133X 113.9X 533.7mm
Origin
China
HS Code
8421399090
Product Desciption
Features & Benefits
YUKA DT series is a range of high efficiency compressed air filters consisting of coalescing filter grades for the removal of water and oil aerosols, solid particulates and micro-organisms and dust filter grades for the removal of dry particulate and micro-organisms.
In these times of increasing energy costs, an efficient and cost effective manufacturing process is a major factor in maintaining the profitability and growth of your business. All YUKA Compressed Air Filters are designed to not only minimize the use of compressed air and electrical energy in their operation, but also to significantly reduce the operational costs of the compressor by minimizing pressure losses.
DT series Compressed Air Filters incorporate a number of unique and patented design features to minimize differential pressure and provide a filter and element combination where the differential pressure starts low and stays low to maximize energy savings and provide the lowest lifetime costs without compromising air quality.
Guaranteed Quality
All YUKA series Compressed Air Filters have TWO GUARANTEES.
The first guarantee is a filter element PF/AO/AA/AX grade with 6000-8000 hours serve life. ACS/AR/AAR grade with 2000-3000 hours. This ensures that the solid particle, oil aerosol and vapor content selected conforms to the ISO 8573.1 international standard.
The second guarantees the compressed air filter housing for fifteen years under recommended operating conditions.
Validated Performance
The performance of DT series compressed air filters exceeds the latest international ISO 12500 air quality standard.
7 Grades Filter Element: PF/AO/AA/AX/ACS/AR/AAR
International test and measurement standard ISO12500
>ISO 12500 has made clear a general test and definition method for the compressed air filter manufacturers. The main performance
parameters are the air inlet oil content and particles size distribution of the solid particles.
>ISO12500-1 specifies the test requirements for the filtration performance of oil aerosol in the coalescing filter.
>ISO12500-2 specifies the test requirements of adsorption filters for the removal performance of steam adsorption.
>ISO12500-3 specifies the requirements for removal of particulate matter from solid pullutants.
Product are test with the international advanced testing equipment based on standard ISO12500, Which is equivalent to the standard ISO8573.1-2010
quality standard, and provide filter performance test report.
Technical Specification
The flow rate below is the treatment capacity of compressed air under rated working pressure 7bar g(100psi g).
For the application in other working pressure, please refer to the correction factors.
YUKA CE & ISO9001-2015 Certificate
YUKA Patents
YUKA Factory
YUKA Facility
YUKA Exhibitions in Shanghai ComVac Asia & Hannover Messe
YUKA service:
a. Providing professional consultation, technical support and special solutions
b. Providing timely feedback on complaints
c. Providing perfect after sales service and warranty
Q:Why choose us?
a. 22 years' practical experiences in R&D and manufacturing Compressed air treatment;
b. Founder of Compressed Air Nation Standard GB/T30475.1-2013 and GB/T30475.2-2013;
c. ISO 9001:2015, CE and product follow ISO8573-1;
d. With Germany Imported high efficiency filtration Test Instrument;
e.All goods had been 100% test before dispatched.
Frequently Asked Questions:
Q1. What kind of your company is it?
We're the manufacturer integrated with R&D, production and sales.
Q2. How about your technical conditions and production capability?
Complete process documents and equipment, mass production.
Q3. What is the delivery time?
Delivery time depends on the order quantity, normally is 3-5 working days after 30% payment.
Q4. Do you have a warranty?
Yes, for filter, it is 1 year normally.
Q5. Can you supply customized product?
Yes, we have a professional technical team to provide you with the best solution and complete production processes and control to provide you with satisfied product.
YUKA DT series is a range of high efficiency compressed air filters consisting of coalescing filter grades for the removal of water and oil aerosols, solid particulates and micro-organisms and dust filter grades for the removal of dry particulate and micro-organisms.
In these times of increasing energy costs, an efficient and cost effective manufacturing process is a major factor in maintaining the profitability and growth of your business. All YUKA Compressed Air Filters are designed to not only minimize the use of compressed air and electrical energy in their operation, but also to significantly reduce the operational costs of the compressor by minimizing pressure losses.
DT series Compressed Air Filters incorporate a number of unique and patented design features to minimize differential pressure and provide a filter and element combination where the differential pressure starts low and stays low to maximize energy savings and provide the lowest lifetime costs without compromising air quality.
Guaranteed Quality
All YUKA series Compressed Air Filters have TWO GUARANTEES.
The first guarantee is a filter element PF/AO/AA/AX grade with 6000-8000 hours serve life. ACS/AR/AAR grade with 2000-3000 hours. This ensures that the solid particle, oil aerosol and vapor content selected conforms to the ISO 8573.1 international standard.
The second guarantees the compressed air filter housing for fifteen years under recommended operating conditions.
Validated Performance
The performance of DT series compressed air filters exceeds the latest international ISO 12500 air quality standard.
7 Grades Filter Element: PF/AO/AA/AX/ACS/AR/AAR
| PF | AO | AA | AX | ACS | AR | AAR |
| As a primary filter, particles whose diameter more than 5μm can be remove,the maxi. residual oil content is negligible | High efficiency general protection, dust particles, water mist & oil mist whose diameter more than 1μm can be removed, the residual content of oil mist does not exceed 0.6mg/m³ (21ºC),1ppm(w). | High effiency oil remove filtration, dust particles, water mist and oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.01mg/m³(21ºC),0.01ppm(w) | Ultra-efficient filtration, dust particles, water mist&oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.001mg/m³(21ºC),0.001ppm(w) | Dust particles whose diameter more than 0.01μm, oil vapor &odor can be removed, the maxi. resident content of oil vapor does not exceed 0.003mg/m³(21ºC),0.003ppm(w) | Dust particles whose diameter more than 1μm can be removed | Dust particles whose diameter more than 0.01μm can be removed |
International test and measurement standard ISO12500
>ISO 12500 has made clear a general test and definition method for the compressed air filter manufacturers. The main performance
parameters are the air inlet oil content and particles size distribution of the solid particles.
>ISO12500-1 specifies the test requirements for the filtration performance of oil aerosol in the coalescing filter.
>ISO12500-2 specifies the test requirements of adsorption filters for the removal performance of steam adsorption.
>ISO12500-3 specifies the requirements for removal of particulate matter from solid pullutants.
Product are test with the international advanced testing equipment based on standard ISO12500, Which is equivalent to the standard ISO8573.1-2010
quality standard, and provide filter performance test report.
| Filtration Grade | PF | AO | AA | AX | ACS | AR | AAR |
| Size of solid particles (ISO12500-3) | 5μm | 1μm | 0.01μm | 0.01μm | - | 1μm | 0.01μm |
| Filtration performance of solid particles(ISO12500-3) | - | 99.999+% | 99.999+% | 99.999+% | 99.999+% | 99.999+% | 99.999+% |
| Filtration performance of oil(ISO12500-1) | 50% | 80+% | 99.9+% | 99.99+% | - | - | - |
| Residual oil content(ISO12500-1) | 5mg/m³ | 0.6mg/m³ | <0.01mg/m³ | <0.001mg/m³ | <0.004mg/m³ | - | - |
Technical Specification
The flow rate below is the treatment capacity of compressed air under rated working pressure 7bar g(100psi g).
For the application in other working pressure, please refer to the correction factors.
| Model | Pipe size | Flow rates | Dimension (mm) | |||||||
| L/S | m3/min | scfm | W(Width) | D(Depth) | H(Height) | A | B | C(clearance for housing) | ||
| DT009 | RC1/4" | 5.0 | 0.3 | 10.6 | 80.6 | 69.0 | 224.1 | 24.6 | 173.9 | 50.5 |
| DT010 | RC3/8" | 10.0 | 0.6 | 21.2 | 80.6 | 69.0 | 224.1 | 24.6 | 173.9 | 50.5 |
| DT011 | RC1/2" | 20.0 | 1.2 | 42.4 | 108.2 | 93.3 | 275.3 | 30.1 | 220.6 | 53.3 |
| DT012 | RC3/4" | 25.1 | 1.5 | 53.0 | 108.2 | 93.3 | 275.3 | 30.1 | 220.6 | 53.3 |
| DT013 | RC1/2" | 30.1 | 1.8 | 63.5 | 108.2 | 93.3 | 315.3 | 30.1 | 260.6 | 53.3 |
| DT014 | RC3/4" | 33.4 | 2.0 | 70.6 | 108.2 | 93.3 | 315.3 | 30.1 | 260.6 | 53.3 |
| DT015 | RC3/4" | 46.8 | 2.8 | 98.8 | 133.0 | 113.9 | 399.6 | 40.7 | 291.0 | 59.6 |
| DT016 | RC1" | 60.1 | 3.6 | 127.1 | 133.0 | 113.9 | 399.6 | 40.7 | 291.0 | 59.6 |
| DT017 | RC1" | 80.2 | 4.8 | 169.4 | 133.0 | 113.9 | 468.4 | 40.7 | 359.8 | 59.6 |
| DT018 | RC1-1/2" | 100.2 | 6.0 | 211.8 | 133.0 | 113.9 | 468.4 | 40.7 | 359.8 | 59.6 |
| DT019 | RC1-1/2" | 125.3 | 7.5 | 264.8 | 133.0 | 113.9 | 533.7 | 40.7 | 425.3 | 59.6 |
| DT020 | RC2" | 200.0 | 12.0 | 424.0 | 170.0 | 158.3 | 783.1 | 52.9 | 623.0 | 59.6 |
| DT021 | RC2" | 266.7 | 16.0 | 565.3 | 170.0 | 158.3 | 1065.4 | 52.9 | 945.3 | 59.6 |
| DT022 | RC2-1/2" | 316.7 | 19.0 | 671.3 | 170.0 | 158.3 | 1065.4 | 52.9 | 945.3 | 59.6 |
| Technical requirements | Maximum operating pressure: 10 barg Maximum operating temperature: 80°C Minimum operating temperature:1.5°C | |||||||||
| Pressure | Barg | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
| Psig | 15 | 29 | 44 | 59 | 73 | 87 | 100 | 116 | 131 | 145 | 160 | 174 | 189 | 203 | 219 | 232 | |
| Correction factor | 0.38 | 0.53 | 0.65 | 0.76 | 0.85 | 0.93 | 1.00 | 1.07 | 1.13 | 1.19 | 1.23 | 1.31 | 1.36 | 1.41 | 1.46 | 1.51 | |
Parallel Design
Without Tie-rod Design
YUKA Patents
YUKA Factory
YUKA Facility
YUKA Exhibitions in Shanghai ComVac Asia & Hannover Messe
YUKA service:
a. Providing professional consultation, technical support and special solutions
b. Providing timely feedback on complaints
c. Providing perfect after sales service and warranty
Q:Why choose us?
a. 22 years' practical experiences in R&D and manufacturing Compressed air treatment;
b. Founder of Compressed Air Nation Standard GB/T30475.1-2013 and GB/T30475.2-2013;
c. ISO 9001:2015, CE and product follow ISO8573-1;
d. With Germany Imported high efficiency filtration Test Instrument;
e.All goods had been 100% test before dispatched.
Frequently Asked Questions:
Q1. What kind of your company is it?
We're the manufacturer integrated with R&D, production and sales.
Q2. How about your technical conditions and production capability?
Complete process documents and equipment, mass production.
Q3. What is the delivery time?
Delivery time depends on the order quantity, normally is 3-5 working days after 30% payment.
Q4. Do you have a warranty?
Yes, for filter, it is 1 year normally.
Q5. Can you supply customized product?
Yes, we have a professional technical team to provide you with the best solution and complete production processes and control to provide you with satisfied product.
You Might Also Like
Best Selling 50kg High Quality Electronic Digital Hanging Ha......
Fuller Auxiliary Box High / Low Gear Synchronizer (A-5056) H......
Hydroponic Farm Fertilizer Tank pH/Ec Monitor Automatic Digi......
Industrial Motorized Electric Actuated Ball Valve Manufactur......
Halal and Kosher Cert No Shell Walnut Light Halves Walnut
Garlic Flavor Fried Fava Bean Chips with Brc
Block Making Machine Qt8- 15D Concrete Molds Block Brick Mac......
HS Code Heavy Duty ISO 17712 High Security Bolt Seal
Pen Drive 16GB OEM Nylon Rope USB Drives Lanyard Custom USB ......
LED Concert Scene Background LED Display Screen
330ml 500ml 1.5L Pet Water Bottle Blowing Making Machine
Buttons Laser Marking Machine (DW- F10W )