Remote Control Three Sections Automatic Transfer Switch for ATS Controller
China Remote Control Three Sections Automatic Transfer Switch for ATS Controller, Find details about China Difference Between Switch and Isolator, How to Wire Generator Automatic Transfer Switch from Remote Control Three Sections Automatic Transfer Switch for ATS Controller
Basic Info.
Model NO.
GGQ-1 400A
Output type
Dual
Respond Time
0.05s
Application Range
Power Plant, Hospital
Shell Protection Grade
IP55
Shell Material
Steel Plate
Current
630A
Pole
Abcn
Mechanical Life
8000
Class
PC
Rated Current
100-3200A
Electric Life
3000
Trademark
JUNKE
Transport Package
Paper /Wooden Pallet
Specification
RoHS package
Origin
Zhejiang Yueqing
HS Code
85385000
Model NO.
GGQ-1 400A
Output type
Dual
Respond Time
0.05s
Application Range
Power Plant, Hospital
Shell Protection Grade
IP55
Shell Material
Steel Plate
Current
630A
Pole
Abcn
Mechanical Life
8000
Class
PC
Rated Current
100-3200A
Electric Life
3000
Trademark
JUNKE
Transport Package
Paper /Wooden Pallet
Specification
RoHS package
Origin
Zhejiang Yueqing
HS Code
85385000
Product Desciption
Remote Control Three Sections Automatic Transfer Switch for ATS controller
What dual power automatic transfer switch?
Dual-power automatic transfer switch is microprocessor, which is used to start and switch between grid power and grid power or between grid power and generator power supply in power grid system. It can supply power continuously. Series of dual power supply, when the common use of sudden failure or power outage, through the dual power automatic transfer switch, automatically put into the standby power supply (under small load standby power supply can also be supplied by generators), so that the equipment can still operate normally. The most common are elevators, fire protection, monitoring, lighting and so on.
When the generator set is used as emergency lighting power supply, the start-up time and power conversion time of the generator should not exceed 15s. Double power automatic switching switch should choose "city power - generator conversion" special type.
Dual-power automatic transfer switch has the functions of short circuit and overload protection, over-voltage, under-voltage, phase-gap automatic conversion and intelligent alarm, automatic conversion parameters can be set freely outside, and intelligent protection of operating motor. When the fire control center gives a control signal to the intelligent controller, two circuit breakers enter the sub-unit. In the gate state, the computer network interface is reserved for the realization of remote control, remote adjustment, remote communication, remote measurement and other four remote functions.
What dual power automatic transfer switch?
Dual-power automatic transfer switch is microprocessor, which is used to start and switch between grid power and grid power or between grid power and generator power supply in power grid system. It can supply power continuously. Series of dual power supply, when the common use of sudden failure or power outage, through the dual power automatic transfer switch, automatically put into the standby power supply (under small load standby power supply can also be supplied by generators), so that the equipment can still operate normally. The most common are elevators, fire protection, monitoring, lighting and so on.
When the generator set is used as emergency lighting power supply, the start-up time and power conversion time of the generator should not exceed 15s. Double power automatic switching switch should choose "city power - generator conversion" special type.
Dual-power automatic transfer switch has the functions of short circuit and overload protection, over-voltage, under-voltage, phase-gap automatic conversion and intelligent alarm, automatic conversion parameters can be set freely outside, and intelligent protection of operating motor. When the fire control center gives a control signal to the intelligent controller, two circuit breakers enter the sub-unit. In the gate state, the computer network interface is reserved for the realization of remote control, remote adjustment, remote communication, remote measurement and other four remote functions.
| Rated Current(Ith) | 80A | 100A | 125A | 160A | 250A | 400A | 630A | 800A | 1000A | 1250A | 1600A | ||
| Rated insulation voltage(Ui) | 750V | 1000V | |||||||||||
| Rated concussion withstand voltage(Uimp) | 8KV | 12KV | |||||||||||
| Rated working voltage(Ue) | AC440V | ||||||||||||
| Rated working current(Ie) | AC-31A | 80 | 100 | 125 | 160 | 250 | 400 | 630 | 800 | 1000 | 1250 | 1600 | |
| AC-35A | 80 | 100 | 125 | 160 | 250 | 400 | 630 | 800 | 1000 | 1250 | 1600 | ||
| AC-33A | 80 | 100 | 125 | 160 | 250 | 400 | 630 | 800 | 1000 | 1250 | 1600 | ||
| Rated connection capacity | 10le | ||||||||||||
| Rated breaking capacity | 8le | ||||||||||||
| Rated limited short-circuit current(ls) | 50kA | 70kA | 100kA | 120kA | |||||||||
| Rated short-time withstand current(ls) | 7kA | 9kA | 13kA | 26kA | 50kA | ||||||||
| Transfer I-II or II-I | 0.45s | 0.6s | 1.2s | ||||||||||
| Control Power voltage | DC24V. 48V. 110V. AC220V | ||||||||||||
| Electrical consumption | |||||||||||||
| Rated frequency | Start | 300W | 325W | 355W | 400W | 440W | |||||||
| Normal | 55W | 62W | 74W | 90W | 98W | ||||||||
| Weight(kg) 4 pole | 7.2 | 7.5 | 7.5 | 8.8 | 9.0 | 16.5 | 17 | 32 | 36 | 40 | 43 | ||
You Might Also Like
Cotton Blanket Knitting Machine
High Quality Steel Weldment Aluminum Parts
128X64 cheap LCD Display Module price with LED Light and Con......
V Bottom Paper Grocery Bag Machine
Eccentric Concentric Stainless Steel Nipple A815 Wps31803 (U......
Plant Extract Astraglus Root Extract with High Polysaccharid......
PVC Plasticizer Doa Dioctyl Adipate Factory Price Dioctyl Ad......
Apply to Nordberg Jaw Crusher Spare Parts C116 C130 Jaw Plat......
Ozone Generator Has High Safety Factor and Good Stability
Newest Zxhn F660 F6604 LAN 2 Voice USB WiFi Gpon Ont ONU wit......
Joborn Sf3000 Automatic Lifting Tombstones Marble Granite Sl......