Automatic Trailer Mounted Shotcrete Machine

Product features:
(1) this product adopts self driving wheel type and flexible steering. The truck chassis is the first to be used in the same industry, and the relevant parts are made of famous brand products, with stable quality and strong durability.
(2) advanced hydraulic system. The full hydraulic system is used in the same industry for the first time.
(3) an independent accelerator adding system. After adding the speed coagulant to the speed coagulant hopper, it can be adjusted arbitrarily according to the actual amount.
(4) the automatic feeding process of hopper is that the hopper outlet directly aligns with the blanking hole of shotcreting machine, and the mixing process is not artificially promoted. Compared with previous manual feeding, it improves operator's working condition, reduces labor intensity and saves labor cost.
(5) high efficiency. This product is equipped with a large capacity hopper mixer, combined with the full realization of mechanical loading, and the hydraulic system to control the strong and stable mechanical cutting, cutting speed and cutting in the continuity of artificial feeding compared to improve the quality of the affected the function of the body, so as to reduce spraying machine idle rate, improve the efficiency of spraying machine, reduce energy consumption.




Concrete spraying equipment car has five advantages in the same industry:
1.This car adopts 490 type complete diesel four cylinder engine.
2.The vehicle adopts the direction and air brake system
3.The car uses standard Isuzu chassis and rear axle;
4.The safety of this car is high in safety, and two full hydraulic cylinders are used to avoid the safety of the front end to the ground.
This product is equipped with a large capacity hopper and a strong and stable intelligent hydraulic system to control mechanical blanking. In the gunpowder feeding, cutting speed and cutting continuity, the influence of human body material is often improved. Thus, the efficiency of the automatic Loading Shotcrete Machine is reduced and the efficiency of the sprayed machine is improved. The efficiency of this product is about 30% higher than that of artificial feeding.

Tunnel automatic spraying machine parameter setting:
Aggregate size: 20 (mm);
Hopper lifting speed: 0.8 (m/min);
Single hopper capacity: 3 (m3);
Rated feeding capacity: 6 (m3);
Large outlet pressure of concrete: 8-10 (Mpa);
Theoretical concrete delivery volume: 7*2 (m3/h);

Purchase Notes:
1. Should it be used for dry concrete spraying or wet concrete spraying?
Dry concrete spraying currently used in our concrete spraying machines.
2. What is the diameter of concrete sand?
      The particle diameter of the concrete spraying machine is 15-20MM.
3. How far is the spray distance?
    The spray distance is determined by the size of the air compressor, slope, horizontal distance and vertical height.
4. Is there a limit to the slope and space size of the working road surface?
Due to the limited environment of the tunnel construction site, the slope of the road surface affects the climbing of the automatic loading spraying truck. The two-cylinder engine, the four-cylinder engine or the loader chassis engine can be replaced to work.
5. What are the requirements for motor voltage?
The voltage and hertz of different countries customize the equipment motor.
6. How far is the spraying distance?
  The distance between the spraying distance and the number of spraying pipes need to be calculated.
7. Do you need spare parts?
According to the customer's purchase cycle, the number of steel liners, rubber plates, material chambers and elbows, and nozzle joints and spray pipes are reasonably equipped.

FAQ:

Q1: Are you factory or trade company?
A1: We are factory. And we have ourselves trading company.
 
Q2: What the exactly address of your factory?
A2:  No.27, Beichen Village Industrial Park, Weiyang District, Shaanxi Province China.                                                                                                                            
Q3: Warranty terms of your machine?
A3: One year warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.

Q5: What about the voltage of products? Can they be customized?
A5: Our standard voltage is 380V, 50HZ, 3phase. The voltage can be customized according to your equipment.
 
Q6: Which payment term can you accept?
A6: 100% T/T( Decide according to actual situation)

Q7: How long will you take to arrange production?
A7: we can delivery the normal goods within 7-15 days. Other nonstandard electrical items we will delivery within 25-30 days.
 
Q8: Can you accept OEM orders?
A8: Yes, with professional design team, OEM orders are highly welcome.
 
Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, etc.

Q10: Do you provide samples? Is it free or extra?
A10: Yes, we could offer you the sample machine. But it's not free. You need to pay for the sample and the cost of freight.

Q11: What is your terms of payment?
A11: We accept T/T, Western Union, Money Gram, Paypal, L/C, etc.

Our Company Information:

We have been focusing on high-quality mechanical equipment and construction products for more than 20 years. Especially have rich experience at mining equipment, main products include:

Ultra Large Rock Splitter
Submersible Drilling Rig
Spraying Machine
Grinding Machine

About Our Factory:



About the products:


Packing and Shipping:



Purchase Process:


About the Quality:

Others:


Why you choose us:

1. We are a real factory offering products and provide free technical advice.
2. Company in business for many years and served Over 50 countries customers.
3. All machine with CE, ISO,SGS certificate. Machine and spindle warranty 1 year. 
4. We have phone support in English, if you have any questions, you can call us, and we can give you the best solution within 24 hours.
5. Fast delivery, save your time.