Products

Three Zone Type Temperature Shock Test Chamber

China Three Zone Type Temperature Shock Test Chamber, Find details about China Chamber, Test Chamber from Three Zone Type Temperature Shock Test Chamber

Model NO.
HD-E703
Control
Manual Control
Weight
100-500Kg
Power Source
AC220V
Certificate
ISO9001: 2008
Warranty Period
12 Months
Available Capacity
50L, 80L, 108L 216L, 252L, ...
Model
HD-252tst
Interal Dimension
(W* H* D) 60* 70* 60cm
Outside Dimension
170*235* 182cm
Damper Device
Forced Air Drived Damper
Cooling Method
Air or Water
Ambient Temperature
0 Centigrade Degrees to 30centigrade Degrees
Controller
Oyo-8226
Trademark
Haida
Transport Package
Strong Wooden Case
Specification
ISO9001: 2008
Origin
China
Model NO.
HD-E703
Control
Manual Control
Weight
100-500Kg
Power Source
AC220V
Certificate
ISO9001: 2008
Warranty Period
12 Months
Available Capacity
50L, 80L, 108L 216L, 252L, ...
Model
HD-252tst
Interal Dimension
(W* H* D) 60* 70* 60cm
Outside Dimension
170*235* 182cm
Damper Device
Forced Air Drived Damper
Cooling Method
Air or Water
Ambient Temperature
0 Centigrade Degrees to 30centigrade Degrees
Controller
Oyo-8226
Trademark
Haida
Transport Package
Strong Wooden Case
Specification
ISO9001: 2008
Origin
China
Three Zone Type Temperature Shock Test Chamber

Product Introduction:
Thermal Shock Test Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, which is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm.
 
 
The equipment is widely used in metal, plastic, rubber, electronics and other materials and it can be used as an important reference for improving product quality. It meets the standard of MTL, IEC, JIS, GJB…

Main parameters:
Test methodPneumatic operated door switch 3 chambers
Inner dimension (W*D*H)500*450*450mm
External dimension (W*D*H)1380*1370*1980mm
Temperature range-40 ~ +80ºC
High temperature chamber pre-heating range60 ~ 100ºC
Heating speed+60→+100ºC about 10 minutes
Low temperature chamber pre-cooling range-65 ~ 0
Cooling speedAmbient →-65ºC about 65 minutes
Temperature deviation±3ºC
Thermal recovery timeWithin 5 minutes
External materialAntirust processing cold-rolled steel sheet
Internal materialSUS#304 stainless steel
Thermal insulation materialPolyurethane foam and fiberglass
CoolantR404A / R23
Cooling methodAir cooling
Pressure0.2 - 0.5Mpa
Power supplyThree phase, 380V, 50Hz


ADVANTAGE
1.TM 2101 intelligent automatic detection of the operating system, (can adapt to all current PC)
2.High-tech, low noise
3.Humanized industrial design, easy to place and transport
4.The world famous brand core precision components
5.Security protection system
6.Valid test trip length (modifiable)
7.3 seconds fast temperature change
8.2 chambers temperature conversion faster and save time
9.3 chambers in addition to a low temperature test , high temperature test, there can be done at room temperature test


Features:
  1. Perfect appearance and easy to operate.
  2. Japan LCD English microcomputer temperature controller, with high memory capacity, can save 100 programs, max 9999 cycles, each cycle max time 999hrs.
  3. Three chamber structures, high temperature chamber, low temperature chamber and test chamber, control automatically, stay and switch time adjustable.
  4. Perfect protection alarm functions: short-circuits, Leakage, over temperature of work chamber; compressor over pressure, over load, short water…
  5. Control interface will display alarm reason and provide check methods, machine has emergency stop button.
  6. Cold and hot shock temperature recover within 5 minutes, which complies with MTL, IEC, JIS, GJB and other international standards.
  7. With RS-232C communication port for connecting PC to control, record and save test report.
  
High temperature chamber:
Heater: NI-CR alloy electric heater
Draught fan: Share centrifugal fan when high temperature and do environmental temperature, preheating with axial flow fan.
 
Low temperature chamber:
Cooler: Fin cooler, regenerator
Draught fan: centrifugal fan
 
Drive device:
Pneumatic cylinder: Drive the air door of high, environmental, low temperature
Air compressor: Provide the compressed air for driving pneumatic door (supplied by buyer)
 
Refrigerating device:
Cooling method: mechanical compression refrigeration
Refrigeration compressor:  Semi-closed piston
Refrigerant: R23/R404A
Condensation: Stainless steel welded plate heat exchanger
 
Controller:
Operate interface: 6" color LCD touch screen
Program memory capacity: 100 groups (modify by operator)
Setting range: Time: 1 minute ~ 99 hour 59 minute, cycles: 1~ 999 cycles
Resolution: temperature: 0.01 ºC; time: 1 minute
Input: T thermocouple
Control method: P.I.D control
 
Additional functions:
Timer, over temperature and power failure protection, alarm, record test curve, emergency stop, display test time
Circulated cooling water: pressure: 0.2~0.4MPa, temperature: ≤30ºC
Standard configuration: indication lamp of test chamber, time meter, test hole for wire routing, 6pcs castor, 4pcs adjust wheel.
 
Safety devices:
Leakage and breaker, over temperature, low temperature protect device, exhaust valves, sample power control terminal, over temperature protection of high and low chamber, compressor over pressure, over heat protection, out of water relay, heat relay of fan, compressed air pressure switch, fuse, external alarm terminal


Three Zone Type Temperature Shock Test Chamber

Three Zone Type Temperature Shock Test Chamber

HAIDA INTERNATIONAL is a professional manufacturer of various kinds of testing equipments over 24 years. HAIDA products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.

You Might Also Like