Function

When broken down vehicles parked in emergency parking strip or street,warning triangle can be placed behind at the car 30-100 meters,day and night display due to failure to stop the vehicle to warn oncoming vehicle in front of a faulty car,this device for the non-permanent installations

Specifications

1.       reasonable structure:folding structure ,easy to onboard

2.       stability:some support the use of the cross,wind resisyance,to adapt in a variety of environment

3.       toleranted:the reflector mirror add antioxodants,with rain,dust,temperature and other functions

4.       high visibility:reflective surface of high transmittance,high brightness of raw materials,

attentions

1.       before using warning signs,you must first open the hazard lights,and put warning triangle behind the vehicle on the back of the car with 30 to 100 meters

2.       to extend product life,when warning signs are not used,please fold the reflector and supporting put them inside the plastic protective case

3.       products in the transportation and stprage,need be taken care that avoiding the falling

opening steps

1.       the warning triangle will be removed from the plastic case ,face to face their own reflection,press as the arrow shown in Figure1,      the left and right mirror are slowly of patchwork opened,refer to the next state in Figure 2

2.      the right hand holding a mirror.left mirror left hand slowiy downward pressure,as shown in Figure 3 the arrow has been pressed in the end the following figure 4

3.       open the bracket,as shown in Figure 4 the arrow to open slowly to stand 90 degrees,as Figure 5 bucket state at this time warning triangle has been completely opened,you can use a horizontal surface

Folding steps

1.       facing to the warning triangle

2.       picking up the bracket,as shown in Figure 1 ,slowly away to the next bracket as Fifure

3.       with the left hand holding the left mirror,with the mirror slowly being forced to the right down with the pressure(as shown in Figure 3),has been pressure in the end,as Figure 4 status,and then slowly pressing down the left reflector,as figure 5

4.       put the warning triangle inside of the case for next time using.