JKY 55/50-35 automatic ( mud brick machine ) Introduction:
JKY50/50-35 mud brick machine is mainly used in clay brick production line. It is also used to produce ceramics bricks. The processed pug is changed into the needed billets by the machine through the following steps in clay brick production line.This mud brick machine is mixed first, next treated by vacuum, then conveyed and squeezed by spiral reamer, finally extruded by a fixed shaped opening. JKR55/50-35 automatic brick moulding machine has the reasonable structure. Its extrusion pressure is very big and the biggest one is 3.5Mpa. This mud brick machine yield is very high, 15000 to 18000 pieces every hour. At the same time, mud brick machine is applicable for high vacuum, squeezing thin-walled and porous shale, and coal gangue and clay brick.
The main components are reducer, pneumatic clutch, gear box, stirred tank, vacuum box, and mold. The body of of JKY50/50-35 automatic brick moulding machine is all made of welded steel plates
Operation and Precautions of JKY55/50-35 mud brick machine :
1. This mud brick machine opening, core head, core rod should be replaced and adjusted in time. While they are abraded to some extent, the sizes of tile will be affected in clay brick production line.
2. The wearing parts should be repaired and replaced when they are abraded after a period of use, or the product quality and output will decline, such as reamers, stirring blades and mud pressing board.
3. When you want to stop the machine, stop feeding first, and then squeeze out the clay inside the machine, in order to avoid the overload at next startup. Don't reboot the machine if the air pressure is lower than 0.5MMpa. The friction plate is easily burnt if the air pressure is not enough in clay brick production line.
4. The mud brick machine and all the bolts should be stopped and checked after six to eight hours' work for the first time to make sure if there is looseness. If yes, fasten them in time. If the machine is stopped for more than one day, all the clay material should be squeezed and cleaned out, trying to avoid the damage by the dry clay.
Maintenance and Repair:
JKY50/50-35 mud brick machine should be in good water lubrication condition so the machine is enabled to obtain the maximum efficiency and prolong the service life.
Spindle speed reducer is lubricated by an oil pump filled with N150 (GB/T3141) lubricating oil. The better refueling position is between the two scales of oil dipstick. The other parts are lubricated by 3#extreme pressure lithium-based grease (GB7324-94). The filled lubricating oil has to be replaced after 300 to 600 hours at the very start, and then automatic brick moulding machine can be replaced after 1500 to 5000 hours. The lubricating grease has to be filled regularly.
Parameters of JKY55/50-35 mud brick machine :
program | units of measurements | JKB55/50-35 |
| yield | standardized bricks/h | 15000-18000 |
| diameter of reamer | mm | 550/500 |
| biggest extrusion pressure | Mpa | 3.5 |
| vacuum | Mpa | ≥0.092 |
| power | KW | 160+75 |
| dimension | mm | 5000×5000×2500 |
| weight | kg | 22000 |
Buying tips
We have two kinds of brick machine, one produce mud brick machine , another produce concrete block making machine, when you want to buy, you please tell me
1. You need clay brick machine or concrete block machine?
2. Your brick size( length, width and height)
3.Your brick picture and brick production
My contact information
Name: Maggie
Mobile: 0086-18921625078
We are professional mud brick machine , concrete block machine and block pallet manufacturer, if you are interested, please come here.