Low Density Foam Filter for Alloy Casting

China Low Density Foam Filter for Alloy Casting, Find details about China Ceramic Foam Filter, Silicon Carbide Ceramic Foam Filter from Low Density Foam Filter for Alloy Casting

Basic Info.

Model NO.

CC-SIC Silicon Carbide Ceramic Foam Filter

Trademark

Castcare

Transport Package

Corrugated Carton

Specification

150*150

Origin

China

HS Code

690911000

Model NO.

CC-SIC Silicon Carbide Ceramic Foam Filter

Trademark

Castcare

Transport Package

Corrugated Carton

Specification

150*150

Origin

China

HS Code

690911000

Product Desciption

ZL-SIC silicon carbide foam ceramic filter

Low Density Foam Filter for Alloy Casting

Product characteristics: silicon carbide foam ceramic filter using German imported polyurethane foam sponge as a carrier, silicon carbide mainly squeezed into the foam sponge, and then squeeze out the slurry, the slurry around the foam fiber, after drying, baking at high temperature, polyurethane thermal decomposition, leaving foam ceramic products, namely silicon carbide foam ceramic filter.
The silicon carbide foam ceramic filter, with the three-dimensional mesh interconnection structure of foam sponge, can make metal liquid reflect rectification, mechanical screening, filtration cake, adsorption and other filtration mechanisms to effectively improve the purity of metal liquid, reduce waste rate, reduce mechanical processing loss, thus improve production efficiency and reduce production cost.
Silicon carbide foam ceramic filter has high strength, good thermal stability, larger than surface area and high size accuracy. It is mainly used to filter and purify the filtration of ductile cast iron, ash cast iron, aluminum, copper and other alloy metal liquid, effectively remove large inclusions in metal liquid, adsorb small magazines, reduce the content of gas and harmful elements in metal liquid, improve the metal matrix organization, and improve the mechanical properties of castings.
Product Performance:
1. reduces the waste rate of inclusion defects: inclusion defects by more than 60%.
2. improves mechanical performance of castings: mechanical improvement by more than 10%.
3. improves mechanical performance of castings: mechanical improvement by more than 10%.
4. improves the casting process production rate: the process production rate increases by more than 10%.
5. has a wide range of applicable processes and can be used on a large scale for the assembly line and single-piece manual modeling environment.

The product composition constitutes the Composition of product	Silicon carbide SIC, alumina AL2O3, silica SIO et al
Color: Colour	Grey, Dark Grey
Use the temperature of Service temperature	≤1550ºC
Number of hole density PPI(holes per square inch hole)	10,15,20,30
Porosity is Porosity	85%~90%
Normal temperature compressive strength is RT Mpa	≥ 1.5Mpa (Industry Standard 1.0Mpa)
Volume density of Bulk density	0.4g/cm³~0.5g/cm ³.

Square Specification (mm)	Maximum filtering capacity (kg)		Normal metal fluid flow velocity (kg/s)		Round Specification (mm)	Maximum filtering capacity (kg)		Normal metal fluid flow velocity (kg/s)
Square Specification (mm)	Ductile cast iron	Ash cast iron/ copper-aluminum castings	Ductile cast iron	Ash cast iron/ copper-aluminum castings	Round Specification (mm)	Ductile cast iron	Ash cast iron/ copper-aluminum castings	Ductile cast iron	Ash cast iron/ copper-aluminum castings
404022	32	64	3	4	Φ40*22.	25	50	2	3.5
505022	50	100	4	6	Φ50*22.	35	70	3	4.5
606022	72	144	5	8	Φ60*22.	50	100	4.2	6.5
755022	75	150	6	9	Φ70*22.	75	150	5.5	8.8
1005022	100	200	8	12	Φ80*22.	100	200	7.2	11
757522	110	220	9	14	Φ90*22.	120	240	9	14
808022	150	300	12	18	Φ100*22.	140	280	11	17
10010022	200	400	16	24	Φ110*22.	190	380	13	20
15010022	300	600	24	36	Φ120*22.	230	460	16	25
15015022	450	900	36	54	Φ150*22.	350	700	25	30

Avoid shock, moisture and light care in the handling and transportation to avoid extrusion and collision.
Stored in dry and ventilated areas and prohibited from rain and heavy pressure.
Product packaging: Wrap in cartons with cushion between each layer, see the packing list.

Shandong Cast Care New Materials Co.,Ltd. is a professional manufacturer of foam ceramic filter for casting process. Currently we have 4000 Square meters factory with 5 production line of series of filters, including the ZL-SIC silicon carbide foam ceramic filter, ZL-ALO alumina foam ceramic filter, ZL-ZR0 zirconia foam ceramic filter, ZL-XW series fiber filter screen, ZL-ZK straight-hole ceramic filter, ZL-MK riser sleeve, and ZL-FN furan resin.