Stable Quality Hot Air Dryer Heat for Injection Moulding Machinery

China Stable Quality Hot Air Dryer Heat for Injection Moulding Machinery, Find details about Made in China, Machine from Stable Quality Hot Air Dryer Heat for Injection Moulding Machinery

Basic Info.

Model NO.

THD-100DT-L

Trademark

TOPSTAR

Origin

Guangdong, China

HS Code

8419399090

Model NO.

THD-100DT-L

Trademark

TOPSTAR

Origin

Guangdong, China

HS Code

8419399090

Product Desciption

Stable Quality Hot Air Dryer Heat for Injection Moulding Machinery

Stable Quality Hot Air Dryer Heat for Injection Moulding Machinery

1> Drying and Dehumidifying system
2>Feeding and Conveying system
3>Mold temperature control system
4>Auto cooling system
5>Dosing&Mixing system
6>Granulating&Recycling system

Introduction

Stainless and polished one-unit design ensures material free from contamination.
It adaots "Hot Air Down-Blowing" and "Cyclonic Air Exhausting" principle to ensure uniform dry efficiency.
All these models areparticularly for optics.

Practical New Patent for Stainless Hopper Dryers.
Patent No: ZL 201120302379.3

Features

1. Double-layer stainless steel hopper dryer features with superior temperature keeping to improve energy saving greatly.
2. The material inlet lid of hopper is equipped for easy installation of auto loader.
3. Drying under the principle of hot air down-blowing and cuclone air exhausting result in consistent drying effects evenly.
4. Adjustable overheat safety thermostat.
5. Main power isolator externally installed as standard.
6. Hopper barrel is fitted with see-through windows to observe inside material level.
7. Safety device with overheat and overload protection.
8. 24 hours auto start/stop timers as standard.

Options

1. Magnetic Seats
2. Hopper Magnet
3. Hot Air Recyclers
4. Exhaust Air Filters
5. Material suction boxes
6. Floor Stand

Product Structure Diagram

Specification Sheet

Model		THD-6DT-L	THD-12DT-L	THD-25DT-L	THD-50DT-L	THD-75DT-L	THD-100DT-L	THD-150DT-L	THD-200DT-L	THD-300DT-L	THD-400DT-L	THD-600DT-L	THD-800DT-L	THD-1000DT-L	THD-1500DT-L	THD-2000DT-L	THD-2400DT-L
Hopper Capacity	KG	6	12	25	50	75	100	150	200	300	400	600	800	1000	1500	2000	2400
Blower Power	W	75	75	135	155	210	215	320	320	340	340	1000	1500	1500	2200	2200	3700
Heater Power	KW	0.9	1.8	3.0	4.0	6.0	9.0	9.0	12.0	15.0	18.0	21.0	24.0	32.0	48.0	48.0	32.0
Drying Temp	ºC	150ºC
Outlet Size	inch	1.5	1.5	1.5	2	2	2.5	2.5	2.5	3	3	4	4	5	5	5	6
Inside Hopper	M	0.21	0.25	0.287	0.387	0.422	0.457	0.512	0.607	0.67	0.76	0.9	0.9	1	1.2	1.2	1.4
Outside Hopper	M	0.253	0.293	0.33	0.43	0.465	0.5	0.595	0.69	0.754	0.844	0.985	0.944	1.05	1.25	1.25	1.5
Flange ID Dia	M	0.04	0.04	0.05	0.05	0.065	0.065	0.065	0.0762	0.1	0.1	0.1	0.11	0.11	0.11	0.11	0.1
Flange PCD Dia	M	0.09	0.06	0.125*0.125	0.13*0.13	0.13*0.13	0.13*0.13	0.13*0.13	0.15*0.2	0.15*0.2	0.21*0.25	0.2	0.2	0.2	0.2	0.2	0.21*0.25
Flange OD Dia	M	0.12	0.12*0.12	0.175*0.175	0.175*0.175	0.175*0.175	0.175*0.175	0.175*0.175	0.175*0.175	0.18*0.245	0.18*0.245	0.25*0.3	0.23	0.23	0.23	0.23	0.25*0.3
Blower PCD Dia	M	0.07	0.136	0.163			0.208	0.254				0.270.3
Blower OD Dia	M	0.1	0.148	0.18			022	0.27
Power Supply	V	380VAC 3P/PE 50Hz
Control Voltage	V	220VAC 1P/PE 50Hz
Total Power	KW	1	2.1	3.4	4.4	4.4	6.4	9.5	12.5	15.5	18.5	22.5	25.5	33.8	50.5	50.6	36
Wires Specification	mm2	5*1.5			5*2.5	44+12.5		46+14			410+16			316+210	325+216		316+210
Wires Length	M	2
Dimensions	L(mm)	0.49	0.525	0.605	0.715	0.74	0.8	0.95	1.05	1.14	1.26	1.49	1.86	1.35	1.55	1.55	2.18
	W(mm)	0.36	0.36	0.57	0.66	0.67	0.69	0.85	0.9	0.91	0.98	1.1	1.25	1.05	1.25	1.25	1.62
	H(mm)	0.55	0..65	0.88	1.09	1.26	1.385	1.55	1.65	1.76	1.86	2.57	2.75	2.5	2.8	3.3	4.11
Weight	KG	30	30	47	63	65	95	130	155	186	225	280	320	380	500	580	650
Flange ID2	M	0.04	0.04	0.05	0.05	0.05	0.063	0.063	0.076	0.1	0.1	0.101	0.101	0.101	0.010	0.010	0.010
Flange L1	M	0.09*0.09	0.09*0.09	0.13*0.13	0.13*0.13	0.13*0.13	0.13*0.13	0.13*0.13	0.12*0.141	0.12*0.141	0.12*0.141	0.21*0.21	0.21*0.21	0.21*0.21	0.21*0.21	0.21*0.21	0.21*0.21
Flange L2	M	0.12*0.12	0.12*0.12	0.175*0.175	0.175*0.175	0.175*0.175	0.175*0.175	0.175*0.175	0.175*0.175	0.18*0.18	0.18*0.18	0.25*0.25	0.25*0.25	0.25*0.25	0.25*0.25	0.25*0.25	0.25*0.25
Optional Accessories	1. Magnetic Seat 2. Hopper Magnet 3. Hot Air Recycle 4. Exhaust Air Filter 5. L Type Floor Stands 6. A Type Floor Stands 7. Material Suction Box