Dust collector is a kind of equipment that uses bag type filtration components made of fibers to capture solid particulates in gas. Dust collector mainly adopts four kinds of cleaning methods, that is, mechanical shaking, reverse-air cleaning, pulse-jet cleaning and compound cleaning.

Dust collector is made up of support, hopper, middle box, upper box, filtering bags, frame, pulse-jet cleaning devices and PLC control procedures. In -the -box is the sub-room structure, while working the gas spread out by the dust collecting duct in all ash bucket. Coarse particles directly fall into the ash bucket bottom for wind speed reducing and the ash bucket spoiler role in the collision, fine dust rose with the bag at all between the fine dust was blocked leaving the outer surface of the bag, cleaning gas clearance role with negative pressure ventilation through the bag into the mains from the body into the atmosphere, reaching the purpose of purification.

 

 3. Parameters of Dust Collector:
 

4. Features of Dust  Collector

(1) Dust collector has high dust cleaning efficiency which generally can reach more than 99%. It also has quite high dust cleaning efficiency for fine dust.

(2) Dust collector has strong adaptability, able to capture dust of different properties.

(3) Dust collector can work flexibly, dealing with air volume from hundreds of cubic meters to hundreds of thousands of cubic meters per hour.

(4) Dust collector has simple structure. Simple bag type dust collector or pulse cleaning dust collector of higher efficiency can be adopted in accordance with specific situations.

(5) Dust collector works stably, easy to recycle dry materials. It has no sludge treatment, corrosion or other issues, and the maintenance is simple.

(6) Dust collector's application is limited by filtering material's heat resistance and corrosion resistance; Polyester filtering material is suitable for 120 ~ 130ºC and the glass fiber filtering material is resistant to about 250ºC.

(7) Dust collector is not suitable for dust with strong bonding and hygroscopicity, especially when dusty gas's temperature is lower than the dew point, condensation will arise and lead to the blockage of the filter bag.

Pre-sale Service

•  Determine your needs and expectations through positive communication, active advice, and visit arrangement;
•  Provide you with necessary preliminary design information, bidding documents or quotation sheet based on your needs and expectations;
• Provide you with technical solutions and help you determine;
• Provide you with draft contract and technology agreements;
• Meet requirements and needs of your bidding documents or other means;
•  Other services before signing contract;
•  Contract evaluation and contract signing.

After-sale Service

•  Select excellent installation team or installation service personnel for you;
•  Provide you with operating and training services;
• Help with the equipment commissioning, and solve problems in trial operation;
• Check and acceptance service for single equipment or a whole production line;
• Service items including follow-up visit, customer satisfaction surveys and so on;
• Timely provide you with necessary accessories after acceptance;
• Provide you with warranty services of repair, replacement and refund if conditions are fulfilled.
• Help you solve other problems.