Products

Polyurethane Resin Two Component Adhesive Sealant for Bus Body Bonding

China Polyurethane Resin Two Component Adhesive Sealant for Bus Body Bonding, Find details about China Adhesive Glue, Polyurethane Adhesive from Polyurethane Resin Two Component Adhesive Sealant for Bus Body Bonding

Model NO.
Flexibond 8101T
Color
Grey
Curing Mechanism
Poly Reaction
Color After Mixing
Grey
Density (Resin)
1.25 G/Cm^3
Density (Hardener)
1.47 G/Cm^3
Mix Ratio
2:1
Application Time After Mixing
10-15 Min
Curing Condition (23ºC)
168 H
Electrophoresis
up to 230ºC
Tensile Strength
3.5 MPa
Shear Strength
2.5 MPa
Elongation at Break
450%
Trademark
Flexibond
Transport Package
400ml 2: 1 Jointed Cartridge Set
Specification
ISO9001, ISO14001
Origin
China
HS Code
3506100090
Model NO.
Flexibond 8101T
Color
Grey
Curing Mechanism
Poly Reaction
Color After Mixing
Grey
Density (Resin)
1.25 G/Cm^3
Density (Hardener)
1.47 G/Cm^3
Mix Ratio
2:1
Application Time After Mixing
10-15 Min
Curing Condition (23ºC)
168 H
Electrophoresis
up to 230ºC
Tensile Strength
3.5 MPa
Shear Strength
2.5 MPa
Elongation at Break
450%
Trademark
Flexibond
Transport Package
400ml 2: 1 Jointed Cartridge Set
Specification
ISO9001, ISO14001
Origin
China
HS Code
3506100090
Polyurethane Resin Two Component Adhesive Sealant for Bus Body BondingDESCRIPTION
Flexibond 8101T is a two-component structural sealing MS polymer, which has excellent elongation, high bonding strength, and very good aging resistance under high temperature and humidity. 8101T is primer-less, has very good adhesion to various metal and non metal materials. It contains no volatile solvents, with non-sagging, moderate viscosity, fast curing and bonding effect. It also has good resistance for high temperature in short time, especially suits the needs for electronic coating processing.

ADVANTAGES
Flexibond 8101T can be used for various metal and non metal materials bonding such as iron, aluminum, galvanized sheet, glass, fiberglass, PC, MSC, ABS, PVC etc. It can resist with 180ºC backing, in short time up to 230ºC. If used with our primer, it also can be used bonding with PE, PP.

.
TECHNIACAL DATA SHEET
Appearance                    Grey
Solid content (%)99.7%
 Modified Polymer
 ComponentAComponentB
ColorWhite uniform pasteDark grey uniform paste
The color after mixing                  Grey uniform paste
Density (before curing)1.25g/cm31.47g/cm3
Mixing ratio (by volume)10050
Mixing ratio (by mass)10059
Application time after mixing
(25ºC, 50%RH)		10-15mins
Curing Condition (23ºC)168h
Tensile strength (25ºC, 50%RH)3.5Mpa
Shear strength2.5Mpa
Elongation at break 450%


Polyurethane Resin Two Component Adhesive Sealant for Bus Body Bonding
Polyurethane Resin Two Component Adhesive Sealant for Bus Body Bonding
APPLICATION
The substrates should be clean and dry and of no grease, dust, or other contaminations. The substrates can be cleaned by alcohol or acetone. Polish is recommended if with aluminum and other difficult adhesion materials.
 
  1. Put the cartridge into the manual or pneumatic applicator gun.
  2. Remove the stopper at the top the cartridge, and screw the extrusion-type nozzle, and then cut the nozzle into a suitable shape and size according to your need.
  3. Start the applicator gun and give up the sealant  for the first 20cm, then apply to the substrates or the place for sealing.
  4. Substrates have been coated with adhesive should be pressed within application time, ensure the fully coating of substrate, or the adhesion strength will be affected. Two or more workers are recommended
  5. Replace with new nozzle If stop extrusion more than application time, make sure smooth processing
  6. After application, put back the stopper with the left sealants, screw tight, sealing well
  7. Must use with primer before application


CLEANING
Recommended Cleaner: Acetone, butanone.

PACKAGING
400ml 2:1 jointed cartridge set
200L metal drum
Polyurethane Resin Two Component Adhesive Sealant for Bus Body BondingPolyurethane Resin Two Component Adhesive Sealant for Bus Body BondingPolyurethane Resin Two Component Adhesive Sealant for Bus Body BondingPolyurethane Resin Two Component Adhesive Sealant for Bus Body BondingPolyurethane Resin Two Component Adhesive Sealant for Bus Body BondingPolyurethane Resin Two Component Adhesive Sealant for Bus Body BondingPolyurethane Resin Two Component Adhesive Sealant for Bus Body Bonding










 

You Might Also Like