Fiberglass chopped strand mat with PP core
 
This mat is the multi-layered combination mat, generally made by mechanically stitching layers of roving or woven roving or chopped strand, in this case to one or both sides of synthetic fiber core (PP or PET), like a sandwich. The complex mat generally also be made from a combination of woven roving which are mechanically stitched with mats made of chopped strand to form the "bread". Some complex mat even have no roving or fabric (i.e. complexes stitched from mats and veils without fabric layers). In all cases, the layers are mechanically stitched to the synthetic fiber core. It is mainly applied in the hand lay up, RTM and other close molding processes.
This fabric is compatible with UP Resin, Vinyl ester resin, epoxy resin system etc. It is widely used in closed mould applications for vehicle bodies and panels, marine (boat hulls and decks), windmill nacelles, leisure vehicle and structural shapes. 
 
Features:
The structure of sandwich to increase strength, reduce product weight and better surface finish. 
low resin-consumption and faster wet-out. 
Good manufacturability and mechanical properties
Improved fatigue and impact resistance
Good drapability for complicated shapes and good resin flow
 
General parameters:
  
Packing:
Each roll is wrapped by PE film and then packed into carton. Stacking in bulk or palletized is available; the pallet shall be no higher than 2 layers.

(1)How to produce:




(2)How to pack and load:




(3)The application: