The diamond grinding wheel is made of the synthetic diamond as the main abrasive. It has high hardness, high strength, and strong grinding ability. It is used for grinding high and hard alloys, non-metallic materials, cutting hard and brittle hard alloys, non-metallic minerals and so on. Such as cemented carbide, ceramics, agate, optical glass, semiconductor materials, wear-resistant cast iron, stone, and other high-hard and brittle materials and special materials processing.




 

 

1. Diamond abrasive is relatively sharp, so the grinding wheel of the diamond wheel has higher grinding efficiency, and the grinding ratio of the ordinary grinding wheel is about 1:1000, and the wear resistance is relatively high.

2. The diamond resin grinding wheel has good self-sharpness, small heat generation during grinding, and is not easy to block, which reduces the phenomenon of work burns during grinding.

3. Diamond abrasive particles are uniform and very fine, so the diamond grinding wheel has high processing precision, and is mainly used for fine grinding, semi-finishing, knife grinding and polishing.

4. The diamond grinding wheel can almost achieve dust-free processing, meeting the requirements of modern industry for environmental protection.
 

According to the product model, our resin diamond grinding wheel can be used to select a variety of grinding wheels.
(Parallel grinding wheel, parallel arc grinding wheel, double-sided concave grinding wheel, Double Hypotenuse grinding wheel, Single tapered grinding, bowl type grinding wheel, Cup type grinding wheel, etc.


Parallel grinding wheel: Mainly used for carbide's cylindrical grinding and edge grinding.

Parallel arc grinding wheel: Mainly used for forming grinding of hard alloy and forming grinding of circular arc surface.

Double-sided concave grinding wheel: Mainly used for grinding measuring tools and centerless grinding machines
 

EXTERNAL CYLINDRICAL GRINDERS; INTERNAL CYLINDRICAL GRINDERS; SURFACE GRINDERS; VERTICAL GRINDER; HORIZONTAL GRINDER; TOOLS GRINDERS; CENTERLESS GRINDER. 
 

When you grinding workpieces as well as in case of large grains size or hard bond, recommended use high concentration. If a working layer with very fine grains or wide rim, recommended use low concentration.

 

Selection the appropriate RVD grain size's type and size, it can guarantee optimal grinding wheel operation and required surface quality. Grit size affects surface roughness and grinding efficiency the smaller the grain size, with better the surface roughness and lower grinding efficiency.
 

Mainly used for grinding high and hard alloys, non-metallic materials, cutting hard and brittle hard alloys, non-metallic minerals, etc. 

Such as carbide, ceramics, agate, optical glass, semiconductor materials and wear-resistant cast iron, stone and so on. Including Surface grinding, OD grinding, centerless grinding, tool grinding, fine grinding, double disc grinding, slot grinding.