• Product name:Pharma Foil
• Application: Blister Foil
• Alloy:8011
• Temper:H18
• Thickness/Gauge:0.018-0.040mm
• Width:200-1450mm
• Inner diameter:76/152mm
• Length/Outer Diameter:Customized as per demand/request
• Production standards:GBT 3198-2010, JIS H 4160-1994, DIN_EN_546-2

<2.4 Dimensional Tolerances
Thickness Tolerance: within + 3.5%)
Width Tolerance        : + 1.0 mm
Roll Core:  Steel core with ID 76mm and 152mm and protrusion of 1-10mm at both ends
2.5  Surface Condition
One side matt and the other bright. Surface free from defects that are detrimental to the application such as corrosion, broken matt, indent, loose edge, dent mark, stains, line marks, scratches, holes, etc.
2.6   Other Conditions
Edge: No telescopic, oscillation, slanting and collapse marks.
Joints: For roll OD250-390mm, allowing 0-2 joints of each roll with ultrasonic welding;
            For roll OD390-450mm, allowing 0-3 joints of each roll with ultrasonic welding;
 For roll OD450-650mm, allowing 0-5 joints of each roll with ultrasonic welding;
The length between joints is more than 1000 meters.
Unwind: Coil is free from stickiness and can be unwind freely to the core.

3  TEST METHOD
 
4  PACKAGING AND LABELLING
4.1  Packing Method
Each roll shall be suspended at both sides of the wooden box.  Rolls shall be wrapped with EPE as first layer coupled with silicon gel desiccant in both sides of roll to protect from corrosion, PE film as 2^nd layer and then another layer of PE film for enhancing protection.
4.2    Label Identification
With information of: Manufacturer, Goods Description, S/C NO., Lot No. Alloy & Temper, Dimension, Packing Date, or according to the clients' requirements.