Copper/aluminum Wire Drawing Machine

Brief introduction
Large size straight line copper wire drawing machine provides better drawability, lower frictional contact and less operator interference.
Advantages:
Low work hardening rate
During the manufacturing process, technologies such as no bending, no torsion technologies and strong cooling technologies are adopted in the machine to make the wire has a low work hardening rate and excellent toughness and ductility.
High efficiency and low consumption
The straight wire drawing machine is famous for its high efficiency and low cost. When it is applied, it will bring huge cost-reduction as a result of its low power consumption, high percent of pass and yield rate.
 
Following are parameters
Technical Parameters
Ø Inlet wire material: oxygen-free copper rod
Ø Inlet wire diameter: φ8mm
Ø Output wire diameter: φ3.5mm~φ1.6mm
Ø Output speed: 800~1200m/min
Ø Drawing mold number: 17n (Eye die is provided by the user)
Ø Fixed-speed wheel diameter φ280mm
Ø The max. capstan diameter φ300mm
Ø Capstan number 4n
Ø Total compression ratio 86.56%
Ø Main motor power 45KW
Ø Oil pump motor power CB-B40/1.5KW
Ø Adjustment mode Frequency control to change speed
Ø Wire-drawing lubricating method Full immersion and spray lubrication

Company information
   China Electric (Shanghai) Co., Limited is established since 1960s. We located in Shanghai - the most important international financial and business center of China. We have employees more than 1000. Our factory is about 30,000~50,000 square meters. We have passed ISO 9001:2000 Management Certification. All our products passed CE Certificate for European Union, UL and CSA Certificate for North America, GOST Certificate for Russia and SONCAP Certificate for Nigeria.
   We have always been committed to technological innovation for various requirements of our customers. As we are an integrated company with the technology, manufacturing,sales and service,we can offer clients professional traning before sales, and considerate after sales services.It is our wish that to provide the best products and services so that we can creat more values to our customers.

Our service
 We can provide the layout design of your factory,  the technical specification of the auxiliary facilities,etc.
Our factory is always available for your visiting. And we are glad to take you to see the work site in our customers' factories.
 Engeneers are available to serve the mechines overseas.
Quality assurance: 12 months except furnace and consumable parts (after commissioning).

FAQ
 1. How can I get a quotation?
You can send your inquiry to the below rectangular blank directly and we will reply you in 5 hours.
 
2. Can I get a sample?
Yes. We can offer you a sample but it might not be free. However, we can give discount in your later order.
 
3. Can I view your factory?
Yes. We accept view of our factory in before order. Tell us your agenda in advance and we 
can arrange then.

Contact us
If you have any questions,please feel free to contact us.
 
Shanghai Fortune Electric Co.,Ltd.
                 Hera Huang sales5
                Tel:+86 -21-68783060,687863062           
                Fex:+86-21-68783092
                Mobile:+86-15821498515
                Web:inductionfurnace.en.made-in-china.com